# Bulletproof Automotive > Bulletproof Automotive is devoted for those who demand more than what you can buy at the dealership. More fun, more performance, more luxury, and more Language: en URL: https://bulletproof2026.magepitstop.com/ All pages on this site are available as clean Markdown by adding the header `Accept: text/markdown` to any HTTP request, or via the REST API: REST API: https://bulletproof2026.magepitstop.com/wp-json/mescio-for-agents/v1/markdown?url={page_url} REST API (by id): https://bulletproof2026.magepitstop.com/wp-json/mescio-for-agents/v1/markdown?id={post_id} ## Pages - [Shop](https://bulletproof2026.magepitstop.com/shop/) - [Thank You](https://bulletproof2026.magepitstop.com/thank-you/) - [Why Bulletproof](https://bulletproof2026.magepitstop.com/why-bulletproof/) - [Military Discount](https://bulletproof2026.magepitstop.com/military/) - [Return Policy](https://bulletproof2026.magepitstop.com/return-policy/): Bulletproof Automotive Return Policy Most products in the Bulletproof catalog will be covered by our 30 day return policy. Products ordered from US-based manufacturers may be eligible for a refund, at the discretion of the manufacturer or authorized distributor, if - [Cookie Policy](https://bulletproof2026.magepitstop.com/cookie-policy/): Cookie Policy - [Bulletproof Automotive – High-End Tuning & Performance Parts](https://bulletproof2026.magepitstop.com/) - [Careers](https://bulletproof2026.magepitstop.com/careers/): Automotive Technician – Full Time (Hawthorne, CA) Qualifications: Automotive Technician – Full Time (Hawthorne, CA) Qualifications: High school diploma or equivalent, ASE certified preferred but not required 2+ years hands-on experience in a dealer-level environment Experience and familiarity with JDM - [Vehicle Paint Specialist – Full Time (Hawthorne, CA)](https://bulletproof2026.magepitstop.com/careers/vehicle-paint-specialist-full-time-hawthorne-ca/): Vehicle Paint Specialist - Full Time (Hawthorne, CA) JOB OVERVIEW Bulletproof Auto Spa, a prestigious Los Angeles automotive paint protection and restyling shop, is searching for a vehicle paint specialist to join our opportunistic team. This position is key in - [Brands](https://bulletproof2026.magepitstop.com/brands/): About the Performance Parts Brands We Carry Bulletproof Automotive is a performance parts retailer and build shop at 3523 Jack Northrop Ave in Hawthorne, California, in Los Angeles County. The logos above open more than 160 performance parts brands and - [Automotive Technician – Full Time (Hawthorne, CA)](https://bulletproof2026.magepitstop.com/careers/automotive-technician-full-time-hawthorne-ca/): Automotive Technician – Full Time (Hawthorne, CA) Qualifications: Automotive Technician – Full Time (Hawthorne, CA) Qualifications: High school diploma or equivalent, ASE certified preferred but not required 2+ years hands-on experience in a dealer-level environment Experience and familiarity with JDM - [Categories](https://bulletproof2026.magepitstop.com/categories/) - [Support](https://bulletproof2026.magepitstop.com/support/) - [About Us](https://bulletproof2026.magepitstop.com/about/) - [Services](https://bulletproof2026.magepitstop.com/services/) - [News](https://bulletproof2026.magepitstop.com/news/) - [Contact](https://bulletproof2026.magepitstop.com/contact/) - [Price Match](https://bulletproof2026.magepitstop.com/price-match-guarantee/) - [Media](https://bulletproof2026.magepitstop.com/media/) - [Privacy Policy](https://bulletproof2026.magepitstop.com/privacy-policy/): Privacy Policy - [Unplugged Performance](https://bulletproof2026.magepitstop.com/brand/): Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vivamus fermentum enim eget tortor pharetra, eu luctus est luctus. Fusce eget fringilla purus, quis varius dui. Praesent finibus est a dui hendrerit, quis rhoncus massa viverra. Suspendisse ut malesuada neque, et - [Accessibility](https://bulletproof2026.magepitstop.com/accessibility/): OUR COMMITMENT TO ACCESSIBILITY Bulletproof Automotive LLC is committed to making our website’s content accessible and user-friendly to everyone. If you are having difficulty viewing or navigating the content on this website, or notice any content, feature, or functionality that - [Wholesale Support](https://bulletproof2026.magepitstop.com/wholesale-support/) - [Services](https://bulletproof2026.magepitstop.com/services-3/) ## Blog Posts - [Modified Ferrari Enzo: The IDINGPOWER F-07 Stroker V12](https://bulletproof2026.magepitstop.com/modified-ferrari-enzo-idingpower-f-07/) (2026-09-21): Eight Years Inside One Of Ferrari's Untouchable V12s Almost nobody cuts into an Enzo. Around 500 cars left Maranello between October 2002 and May 2004 against an original plan for 399, and the two decades since have taught owners that - [BRIDE NURMAN Bucket Seat: The Wider Full Bucket That Still Sits Low](https://bulletproof2026.magepitstop.com/bride-nurman-bucket-seat-wide-lowmax/) (2026-09-17): The BRIDE NURMAN Bucket Seat, Built For Bigger Drivers A proper fixed-back bucket asks the driver to fit the seat, not the other way around. The tight thigh bolsters and narrow hip pocket that pin a body in place through - [Lamborghini Temerario Carbon Fiber Body Kit: The 18-Piece 7Design ARIA Aero System For The LB634](https://bulletproof2026.magepitstop.com/lamborghini-temerario-body-kit-7design/) (2026-09-14): The 18-Piece ARIA Kit, Developed In CFD And Built In The USA The LB634 Temerario arrived as the successor to the Huracán with a clean sheet under the skin, a 4.0-liter twin-turbo V8 paired to a plug-in hybrid system and - [The VARIS ARISING-1 That Turns The Nissan Z Into A Circuit Weapon](https://bulletproof2026.magepitstop.com/rz34-widebody-kit-varis-arising-nissan-z/) (2026-08-20): VARIS ARISING-1: A Full Aero Program When VARIS pulled the covers off the ARISING-1 at the 2023 Tokyo Auto Salon, it was not showing a front lip and a wing. It was showing a design language. The ARISING System is - [Lamborghini Revuelto SV: The 1,050 HP V12 Hybrid Sending Off Sant’Agata’s Flagship](https://bulletproof2026.magepitstop.com/lamborghini-revuelto-sv/) (2026-08-14): A 1,963-Unit Farewell To The V12 Flagship The SV badge has always marked the sharpest expression of a Lamborghini flagship, running from the Miura SV through the Aventador SVJ, and the Lamborghini Revuelto SV now arrives as the most extreme - [Koenigsegg CCGT1: 1,600 HP Road-Legal GT1 Hypercar](https://bulletproof2026.magepitstop.com/koenigsegg-ccgt1-road-legal-gt1-hypercar/) (2026-08-13): The Race Car Koenigsegg Never Got To Run Koenigsegg CCGT1 is the car that finally settles a question the company was forced to abandon almost twenty years ago. Christian von Koenigsegg and engineer Dag Bölenius built the original CCGT to - [The NOVITEC Lamborghini Temerario Exhaust And Upgrade Program](https://bulletproof2026.magepitstop.com/lamborghini-temerario-exhaust-novitec/) (2026-07-28): The new Novitec Lamborghini Temerario exhaust program has arrived: exhausts, forged wheels, and suspension for the V8 hybrid, in stock now at Bulletproof Automotive. - [R33 GT-R Widebody Kit Revealed By Liberty Walk](https://bulletproof2026.magepitstop.com/r33-gt-r-widebody-kit-liberty-walk/) (2026-07-20): Liberty Walk Finally Gives The BCNR33 Its Silhouette Kit The R33 GT-R widebody kit finally gives the BCNR33 Skyline the treatment it has waited years for. For years the BCNR33 sat on the sidelines of Liberty Walk's Skyline story. The - [Ferrari 812 Forged Wheels | ANRKY Series TWO AN28](https://bulletproof2026.magepitstop.com/ferrari-812-forged-wheels-anrky-an28/) (2026-06-22): The Forged Wheel The 812GTS Was Waiting For Ferrari 812 forged wheels live in a narrow space where load ratings, brake clearance, and visual presence all have to be satisfied at once, and the front-engined V12 platform makes that harder - [GR Supra ARD Aero, 2,148N Of Proven Track Downforce](https://bulletproof2026.magepitstop.com/gr-supra-ard-aero-package/) (2026-06-15): Inside The GR Supra ARD Aero Package, A 1,618% Downforce Gain Explained The GR Supra ARD aero package is what happens when motorsport engineering drives every design decision on a road-going chassis. Aero over aesthetic. Function over form. Purpose over - [GRMN Corolla: Toyota’s Most Powerful Street Corolla Yet](https://bulletproof2026.magepitstop.com/grmn-corolla-toyotas-street-corolla/) (2026-06-02): The Ultimate GR Corolla, Built For The Nürburgring The GRMN Corolla is the car Toyota Master Driver Morizo has been pushing toward for years. GAZOO Racing held the world premiere of the GRMN Corolla as the ultimate expression of the - [R35 GT-R Front Mount Intercooler | Boost Logic Ultimate](https://bulletproof2026.magepitstop.com/r35-gt-r-front-mount-intercooler/) (2026-05-28): Built For The Power Levels That Break Other Intercoolers Every R35 GT-R front mount intercooler decision eventually comes down to where the thermal wall sits, and on the R35 platform that wall arrives sooner than most builders expect. The factory - [Porsche Air-Cooled 911 EFI System: The Complete BBI Autosport Solution](https://bulletproof2026.magepitstop.com/porsche-air-cooled-911-efi-system/) (2026-05-20): Porsche Air-Cooled 911 EFI System: A Complete Solution The Porsche air-cooled 911 EFI system from BBI Autosport starts from a position that most EFI conversions skip past: fueling, ignition, and air delivery are not independent problems. They are one problem - [Porsche 911 GT3 Artisan Edition: 30 Units, One Market](https://bulletproof2026.magepitstop.com/porsche-911-gt3-artisan-edition-30-units/) (2026-04-30): The Rarest GT3 Money Can't Easily Buy The Porsche 911 GT3 Artisan Edition is exactly what it sounds like: a purpose-built collector's car that treats Japanese craft tradition with the same seriousness Porsche reserves for lap times. Thirty units, reserved - [Porsche 911 GT3 S/C: The GT3 That Takes The Roof Off](https://bulletproof2026.magepitstop.com/porsche-911-gt3-s-c-the-gt3/) (2026-04-15): Open-Top, Full Attack The Porsche 911 GT3 S/C is the sportiest and lightest open-top 911 ever built, and it makes no apologies for what it is. A 4.0-liter, naturally aspirated flat-six revving to 9,000 rpm, a six-speed manual transmission, a - [NOVITEC Lamborghini Revuelto: Carbon, Power, And 1,048 HP](https://bulletproof2026.magepitstop.com/novitec-lamborghini-revuelto-carbon/) (2026-03-27): When Factory Isn't Enough The NOVITEC Lamborghini Revuelto program takes one of the most spectacular factory builds on the road and sharpens it across every dimension. Carbon aerodynamics developed in the wind tunnel, Vossen-engineered alloy wheels up to 22 inches - [The FL5 Gets A Liberty Walk Honda Civic Type R Body Kit](https://bulletproof2026.magepitstop.com/liberty-walk-honda-civic-type-r-body-kit/) (2026-03-18): The Liberty Walk Makeover The Liberty Walk Honda Civic Type R body kit for the FL5 platform has arrived, and it brings the full lb Nation treatment to one of the most capable front-wheel drive cars on the market. Built - [FK8 Honda Civic Type R Build, Boosted And Reclaimed](https://bulletproof2026.magepitstop.com/fk8-honda-civic-type-r-build-boosted/) (2026-02-19): A Lifelong FK8 Honda Civic Type R Build, Rebuilt In Boost Kevin’s FK8 Honda Civic Type R build is the kind of project that only happens when experience, patience, and timing finally line up. After stepping away from building cars - [Scuderia Ferrari HP And BBS Rekindle A Forged Legacy](https://bulletproof2026.magepitstop.com/scuderia-ferrari-hp-and-bbs-rekindle/) (2026-02-02): A Return Forged In Motorsport History Scuderia Ferrari HP has officially announced BBS Japan as its Technical Partner under a new multi-year agreement, naming BBS as the team’s exclusive supplier of forged magnesium racing wheels beginning with the 2026 season. - [GR Supra Tail Lights: Laser Style For The MK5 Rear](https://bulletproof2026.magepitstop.com/gr-supra-tail-lights-laser-style-for-mk5/) (2026-01-30): GR Supra Tail Lights That Change The Rear Of The MK5 If there’s one area where the A90 and A91 Toyota GR Supra responds immediately to an upgrade, it’s the rear lighting. The factory setup does its job, but it - [S650 Taillights by Auto Addict, A Sharper Rear Statement](https://bulletproof2026.magepitstop.com/s650-taillights-by-auto-addict-rear/) (2026-01-29): S650 Taillights, Heritage Rewritten: Auto Addict’s Heritage-X Launch   The 2024–2026 Mustang introduced a clean-sheet rear profile, and with it came a new opportunity for lighting that feels intentional rather than adapted. In that space, S650 taillights have quickly become - [Bulletproof Auto Spa](https://bulletproof2026.magepitstop.com/bulletproof-auto-spa/) (2026-01-23): Paint Protection Film (PPF) Paint Protection Film is one of the most effective ways to preserve a vehicle’s factory finish. Bulletproof Auto Spa installs XPEL paint protection film backed by a 10-year manufacturer warranty, designed to guard against rock chips, - [VARIS From Super Taikyu To The Street, Aero That Works](https://bulletproof2026.magepitstop.com/varis-from-super-taikyu-the-street-aero/) (2026-01-14): From Super Taikyu To The Street, How VARIS Built Aero That Actually Works For VARIS, motorsports has never been a branding exercise or a styling showcase. It has always been a proving ground. Few racing series embody that philosophy better - [BC Forged LE10: A Timeless Modular Wheel](https://bulletproof2026.magepitstop.com/bc-forged-le10-mle10-a-modular-wheel/) (2026-01-08): A Modular Wheel Design That Fits Everything From JDM to Muscle When it comes to wheel designs that refuse to age out of relevance, the BC Forged LE10 & MLE10 stand firmly in that rare category. Rather than leaning on - [J’s Racing Sharpens The FL5 Civic Type R](https://bulletproof2026.magepitstop.com/js-racing-sharpens-the-fl5-civic-type-r/) (2026-01-07): The Honda FL5 Civic Type R arrived with big expectations, sharper styling, and a drivetrain that rewards precision upgrades. For owners who want to push the platform further without compromising balance or engineering intent, J’s Racing FL5 Civic Type R - [RECARO Bankruptcy Cut Supply, Bulletproof Automotive Reconnected It](https://bulletproof2026.magepitstop.com/recaro-bankruptcy-supply-bulletproof/) (2025-12-23): RECARO Bankruptcy And How Authentic Seats Are Finally Returning The term RECARO bankruptcy has been unavoidable in enthusiast circles throughout the past year, and for many drivers, it has translated directly into frustration. When RECARO USA entered bankruptcy and was - [The S2000 That Never Left Bulletproof Automotive](https://bulletproof2026.magepitstop.com/honda-s2000-bulletproof-automotive/) (2025-12-19): https://youtu.be/YV64dEkIwWo The Bulletproof Automotive S2000 has always been more than a shop car, but its appearance at SEMA 2025 feels especially significant. This is the same Honda S2000 that helped launch Bulletproof Automotive a quarter-century ago, back when the company’s - [Lamborghini Huracan Intake: A Sharper Breath for the V10](https://bulletproof2026.magepitstop.com/lamborghini-huracan-intake-carbon-v10/) (2025-12-09): A New Benchmark For Huracan Airflow The newest Lamborghini Huracan intake from Eventuri arrives today as one of the most polished, fully engineered upgrades released for the EVO and STO platforms. Its design replaces the restrictive factory airboxes with sculpted - [Porsche Cayman GT4 Exhaust Tuned for Real GT4 Character](https://bulletproof2026.magepitstop.com/porsche-cayman-gt4-exhaust-tuned-gt4/) (2025-12-01): Bringing Back The Voice Of The 982 This Porsche Cayman GT4 exhaust upgrade has a way of waking up the 4.0-liter flat-six without turning the car into something it isn’t. Milltek’s Valved Particulate-Filter-Back Exhaust System, available through Bulletproof Automotive, was - [Mercedes-AMG G63 Brought To Life With Capristo Dynamics](https://bulletproof2026.magepitstop.com/mercedes-amg-g63-life-with-capristo/) (2025-12-01): Mercedes-AMG G63 Tone With Precision The Capristo Valved Dual Mufflers for the W463 Mercedes-AMG G63 give the G-Class a more expressive voice shaped around control, clarity, and responsiveness. The 5.5-liter twin-turbo V8 already delivers a commanding presence, and Capristo builds - [Lamborghini Diablo 5.7 VT Exhaust With An F1 Voice](https://bulletproof2026.magepitstop.com/lamborghini-diablo-5-7-vt-exhaust-f1/) (2025-12-01): The Kreissieg Approach To The Lamborghini Diablo 5.7 VT Exhaust The Lamborghini Diablo 5.7 VT exhaust from Kreissieg stands as one of the most sought-after upgrades for the 5.7-liter V12 platform. The Diablo’s factory system carries a distinctive tone, but - [NOVITEC Switchtronic Ferrari 12Cilindri: V12 On Command](https://bulletproof2026.magepitstop.com/novitec-switchtronic-ferrari-12cilindri/) (2025-12-01): Control The 12Cilindri’s Sound With A Factory-Clean Solution   The NOVITEC Switchtronic Ferrari 12Cilindri system brings something new; V12 flagship benefits immediately. Ferrari shaped the 12Cilindri around a naturally aspirated 6.5-liter engine that thrives on sound, response, and airflow. Yet - [Ferrari 458 Italia Exhaust Tuned Into A Higher Art By Kline](https://bulletproof2026.magepitstop.com/ferrari-458-italia-exhaust-tuned-kline/) (2025-12-01): Ferrari 458 Italia Exhaust Performance Reimagined The Ferrari 458 Italia exhaust stands as one of the most defining elements of the F142 platform. Even so, Kline Innovation approached the system with the belief that the 4.5-liter V8 still had more - [Rolls-Royce Cullinan BRABUS 700 Blue Sky, Built For The Bold](https://bulletproof2026.magepitstop.com/rolls-royce-cullinan-brabus-700-blue-sky/) (2025-12-01): A New Expression Of The Rolls-Royce Cullinan The Rolls-Royce Cullinan BRABUS 700 Blue Sky takes one of the most recognizable ultra-luxury SUVs on the planet and infuses it with the unmistakable intensity BRABUS is known for. This build marks the - [992 Porsche Exhaust, Capristo Lets The Engine Speak](https://bulletproof2026.magepitstop.com/992-porsche-exhaust-capristo/) (2025-12-01): A Sound That Fits The 992’s Personality The Capristo Valved Exhaust Muffler for the 992 Porsche 911 Carrera and Turbo adds a new layer of personality to a platform that already stands at the front of modern performance engineering. The - [AL13 109R Aero Disc Wheels Set A New Visual Standard](https://bulletproof2026.magepitstop.com/al13-109r-aero-disc-wheels-standard/) (2025-12-01): A Distinctive Wheel Built For Drivers Who Refuse To Blend In The AL13 109R Aero Disc Wheels bring a refined motorsport influence to modern performance vehicles, shown here mounted on a Mercedes-AMG G63 Brabus 700 as a demonstration of their - [Porsche GT3 Exhaust Mastery; Akrapovic Unleashed](https://bulletproof2026.magepitstop.com/porsche-gt3-exhaust-mastery-akrapovic/) (2025-12-01): A New Pulse For The Porsche GT3 Exhaust Akrapovic approaches the Porsche GT3 exhaust with the same purpose they bring to their factory racing programs; each component must alter how the engine breathes, responds, and builds sound. Their Evolution Titanium - [Vossen GEN-02 Wheel Precision Shaping The Look Of Legends](https://bulletproof2026.magepitstop.com/vossen-gen-02-wheel-precision-shaping-the-look-of-legends/) (2025-12-01): A Three-Piece Design Built For Precision And Presence The Vossen GEN-02 Wheel sets a certain tone the moment it hits a build, creating a balance of engineering detail and visual presence that suits everything from widebody icons to modern supercars. - [Brada Wheels BR-50 Shaping A New Era Of Classic Style](https://bulletproof2026.magepitstop.com/brada-wheels-br-50-shaping-a-new-style/) (2025-12-01): A Crafted Return To Classic Style The Brada Wheels BR-50 brings a refined interpretation of old-school design into the present, shaping it with modern forged construction and detailed customization. Spotted here on a Lamborghini Aventador SV, the wheel shows how - [Vossen S21-08 Wheel Brings Precision Style To Any Build](https://bulletproof2026.magepitstop.com/vossen-s21-08-wheel-precision/) (2025-11-24): The Vossen S21-08 Wheel Sets A New Benchmark The Vossen S21-08 Wheel stands as one of the most refined examples of forged-monoblock craftsmanship, shaped for builders who want tailored performance with art-driven design. As part of Vossen’s Series 21 lineup, - [Brada LX-17R Wheel Crafted For Modern Icons](https://bulletproof2026.magepitstop.com/brada-lx-17r-wheel-crafted-for-icons/) (2025-11-24): Introduction To The Brada LX-17R Wheel The Brada LX-17R wheel stands at the center of Brada’s R Series lineup, carrying the same focus on precision, strength, and design that defines the brand. As a monoblock forged wheel, it is shaped - [Brabus Rocket GTS: 1,000 Horses, One Vision](https://bulletproof2026.magepitstop.com/brabus-rocket-gts-a-carbon-born-hyper-gt/) (2025-11-24): A New Chapter For The Brabus Rocket GTS The BRABUS ROCKET GTS signals a major step forward for the Rocket lineage. This hyper gran turismo shooting brake pairs a full exposed-carbon body with a hybrid system producing 1,000 hp, setting - [Ferrari 458 Italia Exhaust: Waking Up The V8’s Personality](https://bulletproof2026.magepitstop.com/ferrari-458-italia-exhaust-waking-up-v8s/) (2025-11-24): A Focused Upgrade For The Ferrari 458 Italia The Ferrari 458 Italia has earned a reputation as one of the most complete modern supercars, yet the factory exhaust does not fully express the character of its 4.5-liter V8. The Kline - [Lamborghini Diablo GT Exhaust With F1 Sound Energy](https://bulletproof2026.magepitstop.com/lamborghini-diablo-gt-exhaust-with-f1/) (2025-11-24): Kreissieg’s Take On A Lamborghini Diablo GT Exhaust A proper Lamborghini Diablo GT exhaust needs to match the intensity of the 6.0L V12, capture the rawness of late-90s supercar engineering, and enhance the sound without compromising the car’s character. Kreissieg’s - [Porsche 991 Roll Bar Confidence; Manthey’s Titanium Kit](https://bulletproof2026.magepitstop.com/porsche-991-roll-bar-confidence-mantheys/) (2025-11-24): Titanium Strength Tailored For 991 Precision Owners who want a structural upgrade that feels aligned with Porsche’s factory philosophy often look for a Porsche 991 roll bar that carries true motorsport credibility. The Manthey Racing Titanium Roll Bar Kit delivers - [R34 GT-R Big Brake Kit Pushes Rear Stopping Power Further](https://bulletproof2026.magepitstop.com/r34-gt-r-big-brake-kit-rear-stopping/) (2025-11-24): Rear Brake Authority Built For The R34 Skyline The Endless Racing Big 4 Rear Performance Brake System delivers a level of refinement that suits the R34 chassis perfectly. Known for its sensitivity to rear grip and load transfer, the Skyline - [Lamborghini Urus Wheel Arch Extension With Bold Impact](https://bulletproof2026.magepitstop.com/lamborghini-urus-wheel-arch-extension/) (2025-11-24): The Lamborghini Urus already commands attention, but Urban Automotive’s Lamborghini Urus wheel arch extension package brings a cleaner, more assertive outline to the SUV’s shape. Instead of overwhelming the design, these extensions refine the proportions with subtle width, precise angles, - [BRABUS 911 Rocket R Ascends With A Limited-Build Fury](https://bulletproof2026.magepitstop.com/brabus-911-rocket-r-ascends/) (2025-11-24): The BRABUS 911 Rocket R Raises The Bar The BRABUS 911 Rocket R transforms the Porsche 911 Turbo S Coupé into a 900-horsepower statement of identity and engineering intent. The official production run is capped at 25 units worldwide, which - [997.2 Porsche 911 Exhaust: Turning Up The Character](https://bulletproof2026.magepitstop.com/997-2-porsche-911-exhaust-turning-up/) (2025-11-24): Elevating The 997.2 With A Valved Sport Exhaust The 997.2 Porsche 911 exhaust is one of the most rewarding areas to upgrade, and TECHART’s Valved Sport Exhaust System brings a refined balance of tone, performance, and visual detail to the - [Ferrari F12 Exhaust Awakens The V12’s Hidden Voice](https://bulletproof2026.magepitstop.com/ferrari-f12-exhaust-awakens-v12s-voice/) (2025-11-24): A Refined Approach To V12 Sound Ferrari’s front-engine V12 models offer an unmistakable presence, yet factory systems tend to mute the character that makes these cars memorable. The Ferrari F12 Exhaust from Capristo addresses this by opening up the sound ## Products ### Axles / Driveshafts - [Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510030]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-right-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510030/) — $1,522.68 [in stock]: Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec   Right rear Pro-Level shaft for the non V-Spec Skyline GT-R, with billet adapter plates for the factory differential stubs and - [Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510029]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/) — $903.93 [in stock]: Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R   The right-hand Level 5 front shaft for the BNR32, BCNR33 and BNR34: 300M bar and stub in a chromoly CV housing, rated - [Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510027]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) — $903.93 [in stock]: Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R   300M bar, 300M splined stub and a chromoly CV housing, rated by DSS to 1,000HP on the left front of the BNR32, - [Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R [610171]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-3-8in-carbon-mainshaft-for-r35-nissan-gt-r-610171/) — $2,594.93 [in stock]: Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R   A 3.8 inch carbon fiber main propeller shaft for the 2008-2017 GT-R, with a 108mm chromoly CV and a 1,000HP rating. - [Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R [610069]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r34-nissan-skyline-gt-r-610069/) — $1,105.52 [in stock]: Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R   A bolt-on 6061-T6 aluminum propeller shaft for the BNR34, replacing the two-piece factory part and rated to 1,200HP. - [Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R [610049]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r33-nissan-skyline-gt-r-610049/) — $1,105.42 [in stock]: Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R   One-piece 3.5 inch aluminum propeller shaft for the BCNR33, rated to 1,200HP and fitted without modification. - [Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R [610013]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r32-nissan-skyline-gt-r-610013/) — $1,105.42 [in stock]: Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R   A one-piece 6061-T6 aluminum propeller shaft for the BNR32, with a chromoly-upgraded rear CV and a direct bolt-on fit. - [Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R [610050]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r33-nissan-skyline-gt-r-610050/) — $1,788.79 [in stock]: Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R   One-piece high modulus carbon fiber propeller shaft for the BCNR33, 3.25 inches across and rated to 1,200HP. - [Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R [610014]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r32-nissan-skyline-gt-r-610014/) — $1,776.32 [in stock]: Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R   High modulus carbon fiber, one piece and 3.25 inches across: the BNR32 propeller shaft for 1,200HP RB26DETT builds. - [Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R [610070]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r34-nissan-skyline-gt-r-610070/) — $2,235.99 [in stock]: Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R   The BNR34 propeller shaft in one piece of high modulus carbon fiber, 3.25 inches in diameter and rated to 1,200HP. - [Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510028]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-left-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510028/) — $1,522.68 [in stock]: Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec   The left rear Pro-Level shaft for non V-Spec BNR32, BCNR33 and BNR34 cars: 108mm CVs, 30-spline bar, billet 4340 cages, - [Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R [510253]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/) — $1,044.82 [in stock]: Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R   Left front Level 5 shaft for the 2008-2016 R35 GT-R, 300M bar and stub in a chromoly CV housing, rated by DSS to 1,000HP. - [Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R [510254]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/) — $1,034.48 [in stock]: Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R   The right front Level 5 axle for 2008-2016 R35 GT-R builds: 300M bar and stub, chromoly CV housing, 1,000HP rating. - [Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2008-2014) [510252]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/) — $4,277.24 [in stock]: Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2008-2014)   Complete 1400HP rear axle, hub and differential stub kit for the 2008-2014 R35 GT-R, with 33-spline outer CVs and 108mm joints. - [Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2015-2025) [510340]](https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/) — $4,263.16 [in stock]: Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2015-2025)   The 2015 and later R35 GT-R version of the DSS Pro-Level rear axle kit, with diff stubs and larger-spline hubs, rated 1,400HP. ### Big Brake Kits (BBK) - [Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-R]](https://bulletproof2026.magepitstop.com/product/wilwood-red-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207-r/) — $1,229.20 Original price was: $1,229.20.$1,097.50Current price is: $1,097.50. [in stock]: Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Red parking brake calipers on 12.19in plain face Ultralite HP rotors and aluminum hats, a big rotor rear kit for rear disc Civics - [Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-DR]](https://bulletproof2026.magepitstop.com/product/wilwood-red-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-dr/) — $1,388.59 Original price was: $1,388.59.$1,239.81Current price is: $1,239.81. [in stock]: Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Gloss red parking brake calipers over 12.19in SRP drilled and slotted rotors with aluminum hats, for rear disc Civics, Integras and del - [Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-D]](https://bulletproof2026.magepitstop.com/product/wilwood-black-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-d/) — $1,388.59 Original price was: $1,388.59.$1,239.81Current price is: $1,239.81. [in stock]: Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers over 12.19in SRP drilled and slotted rotors in black E-coat, a big rotor rear kit for Civics, Integras - [Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207]](https://bulletproof2026.magepitstop.com/product/wilwood-black-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207/) — $1,229.20 Original price was: $1,229.20.$1,097.50Current price is: $1,097.50. [in stock]: Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers on 12.19in Ultralite HP vented rotors and aluminum hats, the big rotor rear kit for rear disc Civics, Integras - [Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-R]](https://bulletproof2026.magepitstop.com/product/wilwood-red-plain-11in-rear-brake-kit-for-honda-civic-140-10206-r/) — $1,148.87 Original price was: $1,148.87.$1,025.78Current price is: $1,025.78. [in stock]: Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Red parking brake calipers on 11.00in plain face vented rotors with aluminum hats, the rear brake to balance a Wilwood front kit on - [Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-DR]](https://bulletproof2026.magepitstop.com/product/wilwood-red-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-dr/) — $1,308.26 Original price was: $1,308.26.$1,168.09Current price is: $1,168.09. [in stock]: Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Gloss red parking brake calipers over 11.00in SRP drilled and slotted rotors on aluminum hats, for Civics, Integras and del Sols. - [Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206]](https://bulletproof2026.magepitstop.com/product/wilwood-black-plain-11in-rear-brake-kit-for-honda-civic-140-10206/) — $1,148.87 Original price was: $1,148.87.$1,025.78Current price is: $1,025.78. [in stock]: Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black Combination Parking Brake calipers on 11.00in vented rotors with aluminum hats, a rear disc upgrade for Civics, Integras and del Sols. - [Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-D]](https://bulletproof2026.magepitstop.com/product/wilwood-black-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-d/) — $1,308.26 Original price was: $1,308.26.$1,168.09Current price is: $1,168.09. [in stock]: Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers over 11.00in SRP drilled and slotted rotors on aluminum hats, a rear upgrade for Civics, Integras and del ### Wheels - [AL13 Lux Series LUX09 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux09-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX09 Three-Piece sets the Lux Series’ dense multi-spoke face inside a separate outer lip, with each slim spoke opening into a rounded, slotted loop at the edge. Diameter, width, and offset are set independently for flush or widebody - [AL13 Lux Series LUX09 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux09-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX09 Monoblock brings a dense multi-spoke design to the Lux Series. Each slim spoke opens into a rounded, slotted loop at the rim. Every LUX09 Monoblock is forged in one piece and built to order in 19" to - [AL13 Lux Series LUX08 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux08-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX08 Three-Piece sets the Lux Series’ dense multi-spoke face, with dozens of slim spokes radiating from a wide center disc, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with - [AL13 Lux Series LUX08 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux08-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX08 Monoblock fills the Lux Series face with dozens of slim, even-width spokes that radiate from a wide center disc to the rim, giving a dense, formal multi-spoke look. Each LUX08 Monoblock is forged in one piece and - [AL13 Lux Series LUX07 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux07-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX07 Three-Piece sets the Lux Series’ directional finned-spoke face, with a curved fin sweeping off one side of each slim spoke, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, - [AL13 Lux Series LUX07 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux07-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX07 Monoblock brings a directional multi-spoke design to the Lux Series, with a curved fin sweeping off one side of each slim spoke. Each LUX07 Monoblock is forged in one piece, built in mirrored left and right versions, - [AL13 Lux Series LUX06 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux06-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX06 Three-Piece sets the Lux Series’ open multi-spoke face, with slim, evenly spaced spokes, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed titanium hardware. Each - [AL13 Lux Series LUX06 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux06-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX06 Monoblock brings an open multi-spoke design to the Lux Series. Its slim, evenly spaced spokes run from a compact hub out to the rim for a clean, classic look. Each LUX06 Monoblock is forged in one piece - [AL13 Lux Series LUX05 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux05-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX05 Three-Piece sets the Lux Series solid star-shaped 5-spoke face inside the outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed titanium hardware. Each LUX05 Three-Piece is built to - [AL13 Lux Series LUX05 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux05-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX05 Monoblock brings a bold 5-spoke design to the Lux Series. Its solid star-shaped face reaches all the way to the rim, with five openings near the edge. Each LUX05 Monoblock is forged in one piece and built - [AL13 Lux Series LUX04 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux04-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX04 Three-Piece sets the Lux Series directional fan design, broad angled blades sweeping from a compact hub, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed - [AL13 Lux Series LUX04 Monoblock Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux04-monoblock-lux-series/) — $2,400.00 – $2,950.00Price range: $2,400.00 through $2,950.00 [in stock]: The AL13 LUX04 Monoblock brings a directional fan design to the Lux Series, with broad, angled blades that sweep from a compact hub out to the rim. Each LUX04 Monoblock is forged in one piece, built in mirrored left and - [AL13 Lux Series LUX03 Three-Piece Wheel](https://bulletproof2026.magepitstop.com/product/al13-lux03-three-piece-lux-series/) — $3,000.00 – $3,600.00Price range: $3,000.00 through $3,600.00 [in stock]: The AL13 LUX03 Three-Piece sets the densest spoke pattern in the Lux Series, made up of slim spokes that widen into blade-like tips, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, ### Suspension Parts - [BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4 [12-116829]](https://bulletproof2026.magepitstop.com/product/bilstein-b1-front-strut-mount-for-e36-bmw-3-series-z3-e85-z4-12-116829/) — $70.00 Original price was: $70.00.$43.00Current price is: $43.00. [in stock]: BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4   Direct replacement front strut mount for the E36 3 Series, Z3 and E85 / E86 Z4, sold individually with two needed per car. - [BILSTEIN B1 Coilover Spanner Wrench, Hook Plug [E4-XS1-Z001A00]](https://bulletproof2026.magepitstop.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) — $19.57 [in stock]: BILSTEIN B1 Coilover Spanner Wrench, Hook Plug   The hook-plug spanner wrench BILSTEIN specifies for setting ride height and preload on its B14, B16 and EVO coilovers. Sold individually: one wrench ### Modules - [BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra [14-292408]](https://bulletproof2026.magepitstop.com/product/bilstein-b1-active-to-passive-conversion-kit-g29-bmw-z4-a90-gr-supra-14-292408/) — $536.00 [in stock]: BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra   Lets non-electronic dampers go onto a G29 Z4 or A90 GR Supra built with electronic damping, plug and play and without warning lights. ### Suspension Systems - [BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar [11-239680]](https://bulletproof2026.magepitstop.com/product/bilstein-b1-sway-bar-adapter-kit-for-991-porsche-911-pdcc-11-239680/) — $445.00 Original price was: $445.00.$299.00Current price is: $299.00. [in stock]: BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar   Lets BILSTEIN height adjustable coilovers go onto a 991 911 with PDCC while the factory active sway bar system keeps working. Sold individually: one ### Air Suspension - [BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left [44-257200]](https://bulletproof2026.magepitstop.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-left-44-257200/) — $1,887.00 Original price was: $1,887.00.$1,769.00Current price is: $1,769.00. [in stock]: BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left   The front left air strut for the W166 ML and GLE and the X166 GLS, built to plug into the factory air suspension. - [BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right [44-283162]](https://bulletproof2026.magepitstop.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-right-44-283162/) — $1,999.00 Original price was: $1,999.00.$1,874.00Current price is: $1,874.00. [in stock]: BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right   A front right air strut for the W166 ML and GLE and X166 GLS that plugs straight into the factory air suspension and ### Coilovers - [BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM [48-349932]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-997-porsche-911-carrera-without-pasm-48-349932/) — $5,042.00 Original price was: $5,042.00.$3,489.00Current price is: $3,489.00. [in stock]: BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM   Nine damping settings and linear springs for the rear-drive 997 Carrera, Carrera S, GTS and Speedster built without PASM. - [BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [49-349993]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-997-911-carrera-4-turbo-sport-49-349993/) — $5,186.00 Original price was: $5,186.00.$3,589.00Current price is: $3,589.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version   The Sport Version DampTronic kit for the all-wheel-drive 997 with PASM, linear springs and a 15mm to 35mm drop. - [BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4 [89-321294]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-981-porsche-cayman-gt4-89-321294/) — $9,272.60 Original price was: $9,272.60.$7,999.00Current price is: $7,999.00. [in stock]: BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4   Hand-built 2-way adjustable BILSTEIN race coilovers for the 2016 981 Cayman GT4. - [BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [49-321067]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-f44-gran-coupe-f54-f60-49-321067/) — $2,586.00 Original price was: $2,586.00.$2,299.00Current price is: $2,299.00. [in stock]: BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman   Plug-and-play BILSTEIN EVO SE dampers for the adaptive-damper F44 Gran Coupe and F54 and F60 MINI. - [BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [47-322547]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-f44-bmw-2-series-gran-coupe-mini-f54-f60-47-322547/) — $2,136.00 Original price was: $2,136.00.$1,899.00Current price is: $1,899.00. [in stock]: BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman   One BILSTEIN EVO S kit for the F44 228i Gran Coupe, the F54 Clubman and the F60 Countryman. - [BILSTEIN EVO S Coilovers for Tesla Model Y AWD [47-348615]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-tesla-model-y-awd-47-348615/) — $2,024.00 Original price was: $2,024.00.$1,799.00Current price is: $1,799.00. [in stock]: BILSTEIN EVO S Coilovers for Tesla Model Y AWD   Threaded BILSTEIN EVO dampers with fixed street valving for the Long Range and Performance Model Y. - [BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC [49-294651]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-irc-coilovers-for-8p-audi-a3-gti-golf-jetta-passat-cc-49-294651/) — $4,303.00 Original price was: $4,303.00.$2,978.00Current price is: $2,978.00. [in stock]: BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC   Electronic Comfort and Sport damping, by button or by app, added to the 8P A3 and the Mk5 and Mk6 Volkswagen family. - [BILSTEIN EVO S Coilovers for Tesla Model 3 RWD [47-318885]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-tesla-model-3-rwd-47-318885/) — $2,047.00 Original price was: $2,047.00.$1,820.00Current price is: $1,820.00. [in stock]: BILSTEIN EVO S Coilovers for Tesla Model 3 RWD   A lower, tighter rear-drive Model 3 on threaded BILSTEIN EVO dampers with fixed street valving. - [BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM [49-350234]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-981-718-boxster-cayman-pasm-49-350234/) — $4,290.00 Original price was: $4,290.00.$2,969.00Current price is: $2,969.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM   A subtle drop for the PASM-equipped 981 and 718 Boxster and Cayman, with PASM still in charge. - [BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4 [49-309119]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-for-g8x-bmw-m2-m3-m4-49-309119/) — $3,939.00 Original price was: $3,939.00.$3,501.00Current price is: $3,501.00. [in stock]: BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4   EVO SE Plug and Play Coilovers for the G8X M2, M3 and M4: a lower stance on adjustable bodies, with the factory drive modes - [BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM [49-349986]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-987-porsche-boxster-cayman-pasm-49-349986/) — $4,622.00 Original price was: $4,622.00.$3,199.00Current price is: $3,199.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM   For the PASM-equipped 987 Boxster and Cayman: a 25mm to 45mm drop with PASM still in charge of the dampers. - [BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [48-349949]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-997-porsche-911-carrera-4-turbo-sport-48-349949/) — $5,042.00 Original price was: $5,042.00.$3,489.00Current price is: $3,489.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version   The Sport Version B16 kit for the all-wheel-drive 997, with linear springs, tender springs and ten clicks of damping per corner. - [BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster [48-347785]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-986-porsche-boxster-48-347785/) — $3,900.00 Original price was: $3,900.00.$2,699.00Current price is: $2,699.00. [in stock]: BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster   German monotube coilovers with nine damping settings for the first-generation 986 Boxster and Boxster S. - [BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [49-304619]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-g29-bmw-z4-a90-toyota-gr-supra-49-304619/) — $3,824.00 Original price was: $3,824.00.$3,399.00Current price is: $3,399.00. [in stock]: BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra   Lower the adaptive-damper Z4 and GR Supra without losing Sport mode, with plug-and-play BILSTEIN EVO SE dampers. - [BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM [48-347723]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-987-boxster-cayman-without-pasm-48-347723/) — $3,856.00 Original price was: $3,856.00.$2,669.00Current price is: $2,669.00. [in stock]: BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM   Nine damping settings and a 25mm to 45mm drop for the 987 Boxster and Cayman built without PASM. - [BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra [89-312780]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-g20-bmw-3-series-g22-g29-z4-a90-gr-supra-89-312780/) — $7,186.21 Original price was: $7,186.21.$6,199.00Current price is: $6,199.00. [in stock]: BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra   Hand-built 2-way adjustable BILSTEIN race coilovers for the G20, G22, G42, Z4 and GR Supra. - [BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series [48-313063]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-t2-coilovers-for-g20-bmw-3-series-and-g22-4-series-48-313063/) — $3,475.00 Original price was: $3,475.00.$3,089.00Current price is: $3,089.00. [in stock]: BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series   Two-way adjustable BILSTEIN EVO dampers for the rear-drive G20 and G22 that sees regular track days. - [BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S [48-347754]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-4-and-4s-48-347754/) — $4,767.00 Original price was: $4,767.00.$3,299.00Current price is: $3,299.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S   Ten clicks of BILSTEIN damping and linear springs for the all-wheel-drive 996 Carrera 4 and the wide-body Carrera 4S. - [BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R [89-313022]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-8v-audi-a3-s3-rs3-mk7-gti-golf-r-89-313022/) — $5,794.61 Original price was: $5,794.61.$4,999.00Current price is: $4,999.00. [in stock]: BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R   Hand-built, 2-way adjustable BILSTEIN race coilovers for the MQB A3, S3, RS3, GTI and Golf R. - [BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive [48-326216]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-xdrive-48-326216/) — $2,704.00 Original price was: $2,704.00.$2,404.00Current price is: $2,404.00. [in stock]: BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive   The adjustable EVO T1 kit for the all-wheel-drive 330e, rated for its battery and xDrive weight. - [BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive [47-326163]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-xdrive-47-326163/) — $1,969.00 Original price was: $1,969.00.$1,750.00Current price is: $1,750.00. [in stock]: BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive   The EVO S street coilover for the all-wheel-drive 330e, rated for its battery and xDrive weight. - [BILSTEIN EVO T1 Coilovers for G20 BMW 330e [48-326209]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-48-326209/) — $2,704.00 Original price was: $2,704.00.$2,404.00Current price is: $2,404.00. [in stock]: BILSTEIN EVO T1 Coilovers for G20 BMW 330e   Ten damping settings and a stiff linear rear spring, built around the battery weight of the G20 330e. - [BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo [48-347747]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-turbo-48-347747/) — $4,767.00 Original price was: $4,767.00.$3,299.00Current price is: $3,299.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo   Ten damping settings, linear springs and a 25mm to 35mm front drop for the all-wheel-drive 996 Turbo and Turbo S. - [BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman [48-347792]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-981-and-718-porsche-boxster-cayman-48-347792/) — $4,001.00 Original price was: $4,001.00.$2,769.00Current price is: $2,769.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman   One BILSTEIN kit for the 981 and 718 Boxster and Cayman: ten damping settings, progressive springs and a 10mm to 30mm drop. - [BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera [48-347730]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-48-347730/) — $4,767.00 Original price was: $4,767.00.$3,299.00Current price is: $3,299.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera   For the rear-drive 996 Carrera and Targa: a 15mm to 35mm drop at the front and ten damping settings at every corner. - [BILSTEIN EVO R Coilovers for E36 BMW 3 Series [89-317594]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-e36-bmw-3-series-89-317594/) — $4,868.57 Original price was: $4,868.57.$4,200.00Current price is: $4,200.00. [in stock]: BILSTEIN EVO R Coilovers for E36 BMW 3 Series   Hand-built, 2-way adjustable BILSTEIN motorsport coilovers for the E36 race or time-attack car. - [BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe [89-310458]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-x290-mercedes-amg-gt-4-door-coupe-89-310458/) — $5,969.00 Original price was: $5,969.00.$5,149.00Current price is: $5,149.00. [in stock]: BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe   Hand-built 2-way adjustable BILSTEIN race coilovers for the X290 AMG GT 4-Door Coupe, aimed at track use. - [BILSTEIN EVO S Coilovers for G20 BMW 330e [47-326170]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-47-326170/) — $2,047.00 Original price was: $2,047.00.$1,820.00Current price is: $1,820.00. [in stock]: BILSTEIN EVO S Coilovers for G20 BMW 330e   Fixed street valving and threaded height adjustment, tuned for the extra rear weight of the G20 330e plug-in hybrid. - [BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86 [48-330725]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-zc6-zd8-brz-zn6-zn8-toyota-86-gr86-48-330725/) — $3,568.00 Original price was: $3,568.00.$2,469.00Current price is: $2,469.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86   One BILSTEIN kit for both generations of the BRZ, 86, GR86 and FR-S, with ten damping settings and a measured drop. - [BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [48-304498]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g29-bmw-z4-and-a90-toyota-gr-supra-48-304498/) — $2,924.00 Original price was: $2,924.00.$2,599.00Current price is: $2,599.00. [in stock]: BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra   One BILSTEIN EVO T1 kit for the G29 Z4 and the A90 GR Supra, with ten damping settings per corner. - [BILSTEIN EVO T1 Coilovers for B9 Audi RS5 [48-303538]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-b9-audi-rs5-48-303538/) — $3,572.00 Original price was: $3,572.00.$3,175.00Current price is: $3,175.00. [in stock]: BILSTEIN EVO T1 Coilovers for B9 Audi RS5   Road-and-track BILSTEIN coilovers for the twin-turbo B9 RS5, with ten damping settings and a measured drop. - [BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect [47-272514]](https://bulletproof2026.magepitstop.com/product/bilstein-b14-pss-coilovers-for-v408-ford-transit-connect-47-272514/) — $2,381.00 Original price was: $2,381.00.$1,648.00Current price is: $1,648.00. [in stock]: BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect   A lower, tighter V408 Transit Connect on threaded BILSTEIN dampers, with fixed valving and axle ratings for a working van. - [BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series [48-279765]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-g30-bmw-5-series-48-279765/) — $3,905.00 Original price was: $3,905.00.$2,702.00Current price is: $2,702.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series   A 20mm to 40mm drop and ten clicks of BILSTEIN damping for the steel-sprung G30 530i, 530e and 540i. - [BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series [47-300118]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-3-series-and-g22-4-series-47-300118/) — $1,956.00 Original price was: $1,956.00.$1,739.00Current price is: $1,739.00. [in stock]: BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series   Threaded height adjustment and fixed BILSTEIN valving for the rear-drive G20 and G22, with nothing to fiddle with. - [BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI [48-249546]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-va-subaru-wrx-and-wrx-sti-48-249546/) — $3,900.00 Original price was: $3,900.00.$2,699.00Current price is: $2,699.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI   Ten clicks of BILSTEIN damping and a mild 15mm to 25mm drop for the 2015 to 2021 VA WRX and WRX STI. - [BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang [48-253901]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-s550-ford-mustang-48-253901/) — $3,611.00 Original price was: $3,611.00.$2,499.00Current price is: $2,499.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang   German monotube damping for the independent-rear S550 Mustang, with a 20mm to 45mm drop up front and ten clicks of adjustment. - [BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear [48-254960]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-50mm-strut-independent-rear-48-254960/) — $2,600.00 Original price was: $2,600.00.$1,799.00Current price is: $1,799.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear   For the Mk7 Golf and SportWagen with the 50mm strut and multi-link rear: 30mm to 50mm lower, ten damping settings. - [BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e [48-241373]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-w205-mercedes-benz-c300-and-c350e-48-241373/) — $3,466.00 Original price was: $3,466.00.$2,399.00Current price is: $2,399.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e   BILSTEIN monotube coilovers with ten damping settings for the W205 C300 and the C350e plug-in hybrid. - [BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5 [49-290868]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-b9-audi-a4-s4-and-f5-a5-s5-rs5-49-290868/) — $3,611.00 Original price was: $3,611.00.$2,499.00Current price is: $2,499.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5   For the B9 and F5 Audi with adaptive damping: threaded height adjustment with Audi drive select still in charge. - [BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA [49-265262]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-c117-mercedes-benz-cla-49-265262/) — $3,221.00 Original price was: $3,221.00.$2,229.00Current price is: $2,229.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA   For the CLA250 and AMG CLA 45 with adaptive damping: a 25mm to 45mm drop with the drive modes still working. - [BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series [49-303391]](https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-for-g20-bmw-3-series-g22-4-49-303391/) — $3,824.00 Original price was: $3,824.00.$3,399.00Current price is: $3,399.00. [in stock]: BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series   Plug-and-play BILSTEIN EVO SE dampers that lower the rear-drive G20 and G22 and keep the factory drive modes. - [BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper [48-244428]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f56-mini-cooper-48-244428/) — $3,351.00 Original price was: $3,351.00.$2,319.00Current price is: $2,319.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper   A sharper, lower F56 MINI: ten clicks of BILSTEIN damping and a 25mm to 40mm drop at the nose. - [BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4 [49-246988]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-f8x-bmw-m3-m4-49-246988/) — $5,576.00 Original price was: $5,576.00.$3,859.00Current price is: $3,859.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4   Keep Comfort, Sport and Sport Plus on the F80 M3 and F82 M4 while lowering the front by 30mm to 40mm. - [BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle [48-230032]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-tdi-50mm-solid-rear-axle-48-230032/) — $2,600.00 Original price was: $2,600.00.$1,799.00Current price is: $1,799.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle   The B16 kit for the 2015 Golf TDI and SportWagen TDI with the torsion-beam rear: 30mm to 50mm lower, ten damping settings. - [BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut [48-230049]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-volkswagen-golf-55mm-strut-48-230049/) — $2,600.00 Original price was: $2,600.00.$1,799.00Current price is: $1,799.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut   The 55mm strut version of the BILSTEIN B16 kit for the 2015 to 2016 Mk7 Golf and Golf SportWagen. - [BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC [49-234923]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-e60-bmw-m5-with-edc-49-234923/) — $5,345.00 Original price was: $5,345.00.$3,699.00Current price is: $3,699.00. [in stock]: BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC   A lower, firmer V10 E60 M5 with its Electronic Damper Control still in charge of the dampers. - [BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4 [48-244091]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f8x-bmw-m2-m3-m4-48-244091/) — $3,755.00 Original price was: $3,755.00.$2,599.00Current price is: $2,599.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4   B16 PSS10 Coilovers for F8X M2, M3 and M4 owners who want the stance lower, the springs firmer and the damping set by hand with one 10-click - [BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive [48-207287]](https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f30-bmw-3-series-f32-f22-xdrive-48-207287/) — $3,467.00 Original price was: $3,467.00.$2,399.00Current price is: $2,399.00. [in stock]: BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive   Ten clicks of BILSTEIN damping and a 30mm to 50mm drop for the all-wheel-drive F30, F34 GT, F32, F36 and F22. ### Shocks - [BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop [46-281784]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-10mm-rear-drop-46-281784/) — $3,094.00 Original price was: $3,094.00.$2,569.00Current price is: $2,569.00. [in stock]: BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop   A fixed drop of 20mm at the front and 10mm at the rear for the F82 M4, with black Eibach springs. - [BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM [46-258946]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-981-porsche-cayman-with-pasm-46-258946/) — $2,768.00 Original price was: $2,768.00.$2,299.00Current price is: $2,299.00. [in stock]: BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM   A subtle, fixed drop for the PASM-equipped 981 Cayman, S and GTS, on matched BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM [46-258885]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-with-pasm-46-258885/) — $3,009.00 Original price was: $3,009.00.$2,499.00Current price is: $2,499.00. [in stock]: BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM   The rear-drive 991 with PASM, lowered 20mm to 25mm at the nose on matched BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM [46-190666]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-987-porsche-boxster-with-pasm-46-190666/) — $2,648.00 Original price was: $2,648.00.$2,199.00Current price is: $2,199.00. [in stock]: BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM   A fixed 30mm drop for the PASM-equipped 987 Boxster and Boxster S, on matched BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM [46-258892]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-4-without-pasm-46-258892/) — $2,407.00 Original price was: $2,407.00.$1,999.00Current price is: $1,999.00. [in stock]: BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM   A fixed 20mm to 25mm drop at the nose for the 991.1 Carrera 4 without PASM, on BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop [46-276346]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-20mm-front-drop-46-276346/) — $3,130.00 Original price was: $3,130.00.$2,599.00Current price is: $2,599.00. [in stock]: BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop   The milder of the two B12 kits for the E9X M3: a fixed 20mm front and 15mm rear drop on BILSTEIN dampers. - [BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop [46-276223]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-15mm-rear-drop-46-276223/) — $2,599.00 Original price was: $2,599.00.$2,158.00Current price is: $2,158.00. [in stock]: BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop   A fixed 20mm front and 15mm rear drop for the F82 M4, on matched BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop [46-276339]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-25mm-front-drop-46-276339/) — $3,171.00 Original price was: $3,171.00.$2,633.00Current price is: $2,633.00. [in stock]: BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop   A fixed 25mm front and 15mm rear drop for the V8 E9X M3, on matched BILSTEIN dampers and Eibach springs. - [BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM [46-258878]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-without-pasm-46-258878/) — $2,407.00 Original price was: $2,407.00.$1,999.00Current price is: $1,999.00. [in stock]: BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM   B12 Pro-Kit for 991 Carrera owners who want the wheel gap closed and the ride kept civil: matched BILSTEIN dampers and Eibach springs, set once and left alone. - [BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM [46-193773]](https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-997-porsche-911-carrera-4-without-pasm-46-193773/) — $3,130.00 Original price was: $3,130.00.$2,599.00Current price is: $2,599.00. [in stock]: BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM   A fixed 20mm drop for the 997 Carrera 4 and Targa 4 built without PASM, on BILSTEIN dampers and Eibach springs. --- # Full Content --- title: "Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510030]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-right-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510030/" lang: "en-US" type: "product" description: "Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec   Right rear Pro-Level shaft for the non V-Spec Skyline GT-R, with billet adapter plates for the factory differential stubs and" last_modified: "2026-11-14T17:47:22+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,522.68</bdi></span>" sku: "510030" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "RA8013X5" brand: "Driveshaft Shop" part_number: "510030" map: "1522.68" cost: "1293.72" --- # Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510030] # Driveshaft Shop 1400HP Level 5 Right Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec Driveshaft Shop’s 1400HP Level 5 Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R is the right-hand rear shaft from the DSS rear set, rated at 1,400HP and made for an RB26DETT car whose power has outgrown the factory driveline. Porsche-style 108mm CV joints sit at both ends of a 30-spline bar, the cages are machined from billet 4340, and the outer CV is a direct fit, made from a proprietary high-grade material. Billet adapter plates bolt it to the factory differential stubs, which is why a Skyline owner can step up to a drag-proven rear axle without changing the differential. ### Construction - The center bar is a torsional design that DSS says twists considerably more than a factory unit, so it soaks up part of the shock a high-horsepower launch puts through the driveline instead of passing all of it to the joints. The 108mm CV joints run 30-spline internals in billet 4340 cages, and the billet adapter plate and its hardware are what let the 108mm inner joint meet the factory differential stub. ### Features - Torsional center bar that flexes more than the factory shaft to absorb launch shock - Porsche-style 108mm CV joints at both ends - 30-spline bar with billet 4340 cages - Direct-fit outer CV in a proprietary high-grade material - Billet adapter plate with hardware for the factory differential stub - Rated to 1,400HP by Driveshaft Shop - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Sold individually: this is the right rear axle only** - **Driveshaft Shop lists this Rear Axle for R32, R33 and R34 GT-R for non V-Spec cars only** - **The [left rear axle](https://bulletproofautomotive.com/product/driveshaft-shop-left-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510028/) is sold separately** - **Matching Level 5 front axles are available for the same cars: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number RA8013X5** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Rear Axle for R32 fit V-Spec cars?** No. Driveshaft Shop lists this Rear Axle for R32, R33 and R34 GT-R for non V-Spec cars only. Confirm which model the car is before ordering, because the axle is non-refundable once it has been installed and the V-Spec cars are not covered by this part. - **Is this rear axle sold as a pair?** No. This listing is the right rear axle only. Driveshaft Shop sells the rear axles as a pair on its own site, while the left side is listed separately here, so a car can be fitted with one side or both depending on what the owner needs. - **Do I need to change the rear differential stubs?** No. The axle comes with precision billet adapter plates and hardware that mount its 108mm inner CV to the factory differential stub. Driveshaft Shop designed it that way so the factory differential and its stubs stay in the car, which keeps the job to an axle swap rather than a differential rebuild. - **How much power is the Level 5 rear axle rated for?** Driveshaft Shop rates this rear axle at 1,400HP. The figure comes from the 30-spline bar, the billet 4340 cages and the torsional center bar, which absorbs part of the shock of a hard launch on drag radials rather than passing it straight to the CV joints. - **What warranty applies to the rear axle?** Driveshaft Shop gives the rear axle a 1-year warranty. The part is non-refundable once installed, so Bulletproof Automotive recommends confirming the side, the chassis and the non V-Spec fitment before the axle goes on the car. Our team can check the fitment with you before you order. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510029]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/" lang: "en-US" type: "product" description: "Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R   The right-hand Level 5 front shaft for the BNR32, BCNR33 and BNR34: 300M bar and stub in a chromoly CV housing, rated" last_modified: "2026-11-14T17:47:18+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>903.93</bdi></span>" sku: "510029" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "RA8011X5-V2" brand: "Driveshaft Shop" part_number: "510029" map: "903.93" cost: "773.34" --- # Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510029] # Driveshaft Shop 1000HP Level 5 Right Front Axle for R32 / R33 / R34 Nissan Skyline GT-R Driveshaft Shop’s 1000HP Level 5 Front Axle for R32 / R33 / R34 Nissan Skyline GT-R is the right-hand half of the DSS Level 5 front set. It pairs a 300M bar with a 300M splined stub inside a chromoly CV housing, and DSS rates it at 1,000HP. The ATTESA E-TS system sends torque to the front wheels as the rears start to slip, so a hard launch loads the front shafts at their worst moment; this one is for builds making the power to break them, and is wasted on a car still on its factory turbos. ### Design and Performance - DSS developed its Level 5 axles for drag racing first, and they have since earned their keep in road racing and rally cars too. The upgrade is in the materials: 300M is an aerospace-grade alloy steel, used here for both the bar and the splined stub that carries torque into the hub, and the CV housing is chromoly. The axle is a direct replacement for the factory right front shaft, bolting in with no modification to the hub or the differential side. ### Features - 300M alloy steel center bar - 300M splined outer stub - Chromoly CV housing - Rated to 1,000HP by Driveshaft Shop - Right-hand front axle; the left-hand side is a separate part number - Direct bolt-in Front Axle for R32 / R33 / R34 GT-R, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Sold individually: this is the right front axle only** - **The [left front axle](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) is sold separately** - **For the rear of non V-Spec cars, see the Level 5 rear axles: [left](https://bulletproofautomotive.com/product/driveshaft-shop-left-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510028/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-right-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510030/)** - **Driveshaft Shop part number RA8011X5-V2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Is the Driveshaft Shop Front Axle for R32 sold as a pair?** No. The Front Axle for R32, R33 and R34 GT-R on this listing is the right side only, sold as a single axle. Driveshaft Shop sells the Level 5 front axles as a pair on its own site, and the left side is listed separately here so either side can be replaced on its own. - **Will this axle fit the R33 and R34 as well as the R32?** Yes. Driveshaft Shop lists the same Level 5 front axle for the BNR32, BCNR33 and BNR34 Skyline GT-R, all of which use the RB26DETT engine and the ATTESA all-wheel-drive system. Driveshaft Shop does not list it for any other Skyline model, so it should not be assumed to fit a GTS-4 or GT-T. - **How much power can the Level 5 front axle handle?** Driveshaft Shop rates the Level 5 front axle at 1,000HP. That headroom is aimed at heavily modified RB26DETT builds running large single or twin turbos, sticky tires and hard launches, which is where factory front shafts tend to fail on an all-wheel-drive Skyline GT-R. - **Does installing the axle require any modification?** No. Driveshaft Shop describes the Level 5 axle as a direct replacement for the factory front shaft, with no modification to the hub or the front differential. It is fitted in the same position and with the same procedure as the factory front axle it replaces. - **What warranty does Driveshaft Shop give?** Driveshaft Shop covers the Level 5 front axle with a 1-year warranty. Like the rest of the DSS range, the part is non-refundable once it has been installed, so check the side and the chassis carefully before fitting it to the car. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510027]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/" lang: "en-US" type: "product" description: "Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R   300M bar, 300M splined stub and a chromoly CV housing, rated by DSS to 1,000HP on the left front of the BNR32," last_modified: "2026-11-14T17:43:49+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>903.93</bdi></span>" sku: "510027" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "RA8010X5-V2" brand: "Driveshaft Shop" part_number: "510027" map: "903.93" cost: "773.77" --- # Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R [510027] # Driveshaft Shop 1000HP Level 5 Left Front Axle for R32 / R33 / R34 Nissan Skyline GT-R Driveshaft Shop’s 1000HP Level 5 Front Axle for R32 / R33 / R34 Nissan Skyline GT-R replaces the factory left-hand front shaft on the BNR32, BCNR33 and BNR34 with a 300M bar and a 300M splined stub running in a chromoly CV housing. A hard launch on sticky tires puts the front shafts of an RB26DETT build under heavy load, and DSS rates this one at 1,000HP. Built in Salisbury, North Carolina, it suits a big-turbo street GT-R or a dedicated strip car; a stock-power Skyline gains nothing from it. ### Design and Performance - DSS developed its Level 5 axles for drag racing first, and they have since earned their keep in road racing and rally cars too. The upgrade is in the materials: 300M is an aerospace-grade alloy steel, used here for both the bar and the splined stub that carries torque into the hub, and the CV housing is chromoly. The axle is a direct replacement for the factory left front shaft, bolting in with no modification to the hub or the differential side. ### Features - 300M alloy steel center bar - 300M splined outer stub - Chromoly CV housing - Rated to 1,000HP by Driveshaft Shop - Left-hand front axle; the right-hand side is a separate part number - Direct bolt-in Front Axle for R32 / R33 / R34 GT-R, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Sold individually: this is the left front axle only** - **The [right front axle](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/) is sold separately** - **For the rear of non V-Spec cars, see the Level 5 rear axles: [left](https://bulletproofautomotive.com/product/driveshaft-shop-left-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510028/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-right-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510030/)** - **Driveshaft Shop part number RA8010X5-V2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Is the Driveshaft Shop Front Axle for R32 sold as a pair?** No. The Front Axle for R32, R33 and R34 GT-R on this listing is the left side only, sold as a single axle. Driveshaft Shop sells the Level 5 front axles as a pair on its own site, and the right side is listed separately here so either side can be replaced on its own. - **Will this axle fit the R33 and R34 as well as the R32?** Yes. Driveshaft Shop lists the same Level 5 front axle for the BNR32, BCNR33 and BNR34 Skyline GT-R, all of which use the RB26DETT engine and the ATTESA all-wheel-drive system. Driveshaft Shop does not list it for any other Skyline model, so it should not be assumed to fit a GTS-4 or GT-T. - **How much power can the Level 5 front axle handle?** Driveshaft Shop rates the Level 5 front axle at 1,000HP. That headroom is aimed at heavily modified RB26DETT builds running large single or twin turbos, sticky tires and hard launches, which is where factory front shafts tend to fail on an all-wheel-drive Skyline GT-R. - **Does installing the axle require any modification?** No. Driveshaft Shop describes the Level 5 axle as a direct replacement for the factory front shaft, with no modification to the hub or the front differential. It is fitted in the same position and with the same procedure as the factory front axle it replaces. - **What warranty does Driveshaft Shop give?** Driveshaft Shop covers the Level 5 front axle with a 1-year warranty. Like the rest of the DSS range, the part is non-refundable once it has been installed, so check the side and the chassis carefully before fitting it to the car. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R [610171]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-3-8in-carbon-mainshaft-for-r35-nissan-gt-r-610171/" lang: "en-US" type: "product" description: "Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R   A 3.8 inch carbon fiber main propeller shaft for the 2008-2017 GT-R, with a 108mm chromoly CV and a 1,000HP rating." last_modified: "2026-11-14T17:48:12+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,594.93</bdi></span>" sku: "610171" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "NISH35-M-C-V2" brand: "Driveshaft Shop" part_number: "610171" map: "2594.93" cost: "2200.97" --- # Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R [610171] # Driveshaft Shop 3.8in Carbon Mainshaft for R35 Nissan GT-R Driveshaft Shop’s 3.8in Carbon Mainshaft for R35 Nissan GT-R replaces the main propeller shaft that runs from the engine back to the rear-mounted transaxle on 2008-2017 cars, and DSS rates it at 1,000HP. The 3.8 inch carbon fiber tube carries a 300M spline stub system and a billet aluminum flange at the rear, with a custom 108mm CV with full chromoly internals at the other end. It is the shaft to fit once a VR38DETT is making the kind of power that has the factory driveline on borrowed time. ### Construction - The details that matter most on a 1,000HP driveshaft are the fasteners and the joints. DSS uses grade 12.9 extra-strength hardware with backup lock nuts, and says its billet aluminum plates have run on many 1,000HP-plus cars for a decade without a bolt failure. DSS includes a metal cover for the CV, so the factory grease cap does not have to be reused. ### Features - 3.8 inch carbon fiber tube - 300M spline stub system - Billet aluminum rear flange - Custom 108mm CV with full chromoly internals - Carbon Mainshaft for R35 GT-R rated to 1,000HP by Driveshaft Shop - 1-year Driveshaft Shop warranty ### What’s Included - 3.8in carbon mainshaft - Metal CV cover - Grade 12.9 hardware with backup lock nuts ### Applications - **Nissan GT-R:** R35 | 2008-2017 | 3.8L VR38DETT ### Notes - **Driveshaft Shop lists this mainshaft for 2008-2017 models** - **Pair it with the Level 5 front axles, [left](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/), and the Pro-Level Rear Axle Kit for [2008-2014](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/) or [2015 and later](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/) cars** - **Driveshaft Shop part number NISH35-M-C-V2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Which GT-R model years does the Carbon Mainshaft for R35 fit?** Driveshaft Shop lists the Carbon Mainshaft for R35 GT-R for 2008 to 2017 models. If the car is a 2018 or later GT-R, contact Bulletproof Automotive before ordering so the fitment can be confirmed with Driveshaft Shop rather than assumed. - **How much power is the carbon mainshaft rated for?** Driveshaft Shop rates the mainshaft at 1,000HP. The rating rests on the 300M spline stub system, the custom 108mm CV with full chromoly internals and the grade 12.9 hardware with backup lock nuts that holds the billet aluminum flange in place. - **Do I need to reuse the factory grease cap?** No. Driveshaft Shop includes a metal cover for the CV with the mainshaft, so the factory grease cap does not have to be transferred from the old shaft. The grade 12.9 hardware and backup lock nuts are supplied as well. - **Why choose a carbon fiber driveshaft over steel?** Carbon fiber gives a large diameter tube at low weight, which keeps rotating mass down on a long shaft like the GT-R mainshaft. Driveshaft Shop builds this one with a 3.8 inch tube, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it leaves Salisbury, North Carolina. - **What warranty applies to the mainshaft?** Driveshaft Shop backs the 3.8 inch carbon mainshaft with a 1-year warranty. The part is non-refundable once it has been installed, so check the model year of the car against the 2008 to 2017 fitment before it goes in, and keep the receipt with the build records. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R [610069]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r34-nissan-skyline-gt-r-610069/" lang: "en-US" type: "product" description: "Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R   A bolt-on 6061-T6 aluminum propeller shaft for the BNR34, replacing the two-piece factory part and rated to 1,200HP." last_modified: "2026-11-14T17:46:05+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,105.52</bdi></span>" sku: "610069" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "NISH14-A1" brand: "Driveshaft Shop" part_number: "610069" map: "1105.52" cost: "949.56" --- # Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R [610069] # Driveshaft Shop Aluminum Driveshaft for R34 Nissan Skyline GT-R Driveshaft Shop’s Aluminum Driveshaft for R34 Nissan Skyline GT-R is a one-piece 6061-T6 aluminum shaft, 3.5 inches across, that bolts in where the BNR34’s two-piece factory shaft and its hanger bearing used to be. The R34 was the last car to carry both the Skyline and GT-R names, and good ones are now treated as collector cars, so a part that improves the drive without cutting or welding anything matters. DSS rates the shaft at 1,200HP. For most tuned R34s this is the right shaft; the carbon version earns its price on cars built to the limit. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.5 inch 6061-T6 aluminum tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.5 inch 6061-T6 aluminum tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Aluminum Driveshaft for R34 GT-R rated to 1,200HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **The [carbon fiber driveshaft for the R34](https://bulletproofautomotive.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r34-nissan-skyline-gt-r-610070/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH14-A1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Aluminum Driveshaft for R34 replace the two-piece factory shaft?** Yes. The Aluminum Driveshaft for R34 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Aluminum Driveshaft for R34 at 1,200HP. That rating comes from the 3.5 inch 6061-T6 aluminum tube and from a rear CV whose internals have been upgraded to a higher grade of chromoly than the factory joint. - **Will this driveshaft fit a rear-wheel-drive R34 Skyline?** No. This shaft is built for the all-wheel-drive R34 Skyline GT-R, chassis code BNR34. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R34 GT-R. The aluminum shaft uses a 3.5 inch 6061-T6 tube and is the better value for most tuned street cars. The carbon fiber shaft uses a 3.25 inch high modulus tube, saves rotating weight and costs more, which suits builds where every part is chosen for competition. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R [610049]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r33-nissan-skyline-gt-r-610049/" lang: "en-US" type: "product" description: "Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R   One-piece 3.5 inch aluminum propeller shaft for the BCNR33, rated to 1,200HP and fitted without modification." last_modified: "2026-11-14T17:50:55+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,105.42</bdi></span>" sku: "610049" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "NISH12-A1" brand: "Driveshaft Shop" part_number: "610049" map: "1105.42" cost: "949.27" --- # Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R [610049] # Driveshaft Shop Aluminum Driveshaft for R33 Nissan Skyline GT-R Driveshaft Shop’s Aluminum Driveshaft for R33 Nissan Skyline GT-R replaces the BCNR33’s two-piece factory shaft, and its center hanger bearing, with one 3.5 inch tube of 6061-T6 aluminum rated by DSS to 1,200HP. The R33 rides on a wheelbase about 105mm longer than the R32’s, so its propeller shaft is a long span, and a hanger bearing that moves up and down under load is what blunts the response on throttle. A single shaft takes that movement away. It suits any RB26DETT build where the power has gone up and the factory shaft has become the soft link. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.5 inch 6061-T6 aluminum tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.5 inch 6061-T6 aluminum tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Aluminum Driveshaft for R33 GT-R rated to 1,200HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **The [carbon fiber driveshaft for the R33](https://bulletproofautomotive.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r33-nissan-skyline-gt-r-610050/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH12-A1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Aluminum Driveshaft for R33 replace the two-piece factory shaft?** Yes. The Aluminum Driveshaft for R33 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Aluminum Driveshaft for R33 at 1,200HP. That rating comes from the 3.5 inch 6061-T6 aluminum tube and from a rear CV whose internals have been upgraded to a higher grade of chromoly than the factory joint. - **Will this driveshaft fit a rear-wheel-drive R33 Skyline?** No. This shaft is built for the all-wheel-drive R33 Skyline GT-R, chassis code BCNR33. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R33 GT-R. The aluminum shaft uses a 3.5 inch 6061-T6 tube and is the better value for most tuned street cars. The carbon fiber shaft uses a 3.25 inch high modulus tube, saves rotating weight and costs more, which suits builds where every part is chosen for competition. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R [610013]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-aluminum-driveshaft-for-r32-nissan-skyline-gt-r-610013/" lang: "en-US" type: "product" description: "Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R   A one-piece 6061-T6 aluminum propeller shaft for the BNR32, with a chromoly-upgraded rear CV and a direct bolt-on fit." last_modified: "2026-11-14T17:51:46+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,105.42</bdi></span>" sku: "610013" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "NISH10-A1" brand: "Driveshaft Shop" part_number: "610013" map: "1105.42" cost: "948.84" --- # Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R [610013] # Driveshaft Shop Aluminum Driveshaft for R32 Nissan Skyline GT-R Driveshaft Shop’s Aluminum Driveshaft for R32 Nissan Skyline GT-R swaps the BNR32’s factory two-piece propeller shaft for a single 3.5 inch tube of 6061-T6 aluminum. The R32 GT-R won all 29 races it started in the Japanese Touring Car Championship, and three decades on the cars being built to that spirit are making several times the original power. Deleting the center hanger bearing removes the shaft movement that builds under throttle, so the car answers the pedal sooner. For a hard-driven street R32 it is the sensible choice; the carbon shaft is for owners counting every pound. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.5 inch 6061-T6 aluminum tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.5 inch 6061-T6 aluminum tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Aluminum Driveshaft for R32 GT-R rated to 1,000HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **Driveshaft Shop lists this shaft at 1,000HP in its specification table and at 1,200HP in its description; this listing uses the specification table** - **The [carbon fiber driveshaft for the R32](https://bulletproofautomotive.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r32-nissan-skyline-gt-r-610014/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH10-A1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Aluminum Driveshaft for R32 replace the two-piece factory shaft?** Yes. The Aluminum Driveshaft for R32 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Aluminum Driveshaft for R32 at 1,000HP in its specification table. Its product description quotes 1,200HP, and this listing uses the lower, structured figure. Either way it is far beyond what the factory two-piece shaft was built to carry. - **Will this driveshaft fit a rear-wheel-drive R32 Skyline?** No. This shaft is built for the all-wheel-drive R32 Skyline GT-R, chassis code BNR32. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R32 GT-R. The aluminum shaft uses a 3.5 inch 6061-T6 tube and is the better value for most tuned street cars. The carbon fiber shaft uses a 3.25 inch high modulus tube, saves rotating weight and costs more, which suits builds where every part is chosen for competition. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R [610050]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r33-nissan-skyline-gt-r-610050/" lang: "en-US" type: "product" description: "Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R   One-piece high modulus carbon fiber propeller shaft for the BCNR33, 3.25 inches across and rated to 1,200HP." last_modified: "2026-11-14T17:46:25+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,788.79</bdi></span>" sku: "610050" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "NISH12-C1" brand: "Driveshaft Shop" part_number: "610050" map: "1788.79" cost: "1523.3" --- # Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R [610050] # Driveshaft Shop Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R Driveshaft Shop’s Carbon Fiber Driveshaft for R33 Nissan Skyline GT-R turns the longest propeller shaft of the three Skyline GT-R generations into a single high modulus carbon fiber tube, 3.25 inches in diameter, with no hanger bearing in the middle. The BCNR33 was the generation that took the GT-R to Le Mans, and its long wheelbase makes the factory two-piece shaft the softest part of the driveline once the RB26DETT is built. DSS rates this shaft at 1,200HP. It is the choice for an R33 where rotating weight and outright strength both matter. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.25 inch high modulus carbon fiber tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.25 inch high modulus carbon fiber tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Carbon Fiber Driveshaft for R33 GT-R rated to 1,200HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **The photo shows a representative Driveshaft Shop carbon fiber driveshaft; the length and flanges of the R33 shaft differ** - **The [aluminum driveshaft for the R33](https://bulletproofautomotive.com/product/driveshaft-shop-aluminum-driveshaft-for-r33-nissan-skyline-gt-r-610049/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH12-C1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Carbon Fiber Driveshaft for R33 replace the two-piece factory shaft?** Yes. The Carbon Fiber Driveshaft for R33 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Carbon Fiber Driveshaft for R33 at 1,200HP. That rating comes from the 3.25 inch high modulus carbon fiber tube and from a rear CV whose internals have been upgraded to a higher grade of chromoly than the factory joint. - **Will this driveshaft fit a rear-wheel-drive R33 Skyline?** No. This shaft is built for the all-wheel-drive R33 Skyline GT-R, chassis code BCNR33. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R33 GT-R. The carbon fiber shaft uses a 3.25 inch high modulus tube and suits builds where rotating weight and strength both count. The aluminum shaft uses a 3.5 inch 6061-T6 tube, costs less and covers most tuned street cars comfortably. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R [610014]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r32-nissan-skyline-gt-r-610014/" lang: "en-US" type: "product" description: "Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R   High modulus carbon fiber, one piece and 3.25 inches across: the BNR32 propeller shaft for 1,200HP RB26DETT builds." last_modified: "2026-11-14T17:46:26+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,776.32</bdi></span>" sku: "610014" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "NISH10-C1" brand: "Driveshaft Shop" part_number: "610014" map: "1776.32" cost: "1506.58" --- # Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R [610014] # Driveshaft Shop Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R Driveshaft Shop’s Carbon Fiber Driveshaft for R32 Nissan Skyline GT-R is a one-piece shaft made from high modulus carbon fiber, 3.25 inches in diameter, that takes the place of the BNR32’s two-piece factory shaft. Losing the center hanger bearing removes the up-and-down movement it allows under throttle, and the car picks up response the moment the pedal moves. DSS rates the shaft at 1,200HP. On a lightly modified R32 the aluminum shaft does the same job for less; this one is for the build where every component has already been chosen for the drag strip or the circuit. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.25 inch high modulus carbon fiber tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.25 inch high modulus carbon fiber tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Carbon Fiber Driveshaft for R32 GT-R rated to 1,200HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **The photo shows a representative Driveshaft Shop carbon fiber driveshaft; the length and flanges of the R32 shaft differ** - **The [aluminum driveshaft for the R32](https://bulletproofautomotive.com/product/driveshaft-shop-aluminum-driveshaft-for-r32-nissan-skyline-gt-r-610013/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH10-C1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Carbon Fiber Driveshaft for R32 replace the two-piece factory shaft?** Yes. The Carbon Fiber Driveshaft for R32 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Carbon Fiber Driveshaft for R32 at 1,200HP. That rating comes from the 3.25 inch high modulus carbon fiber tube and from a rear CV whose internals have been upgraded to a higher grade of chromoly than the factory joint. - **Will this driveshaft fit a rear-wheel-drive R32 Skyline?** No. This shaft is built for the all-wheel-drive R32 Skyline GT-R, chassis code BNR32. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R32 GT-R. The carbon fiber shaft uses a 3.25 inch high modulus tube and suits builds where rotating weight and strength both count. The aluminum shaft uses a 3.5 inch 6061-T6 tube, costs less and covers most tuned street cars comfortably. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R [610070]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-carbon-fiber-driveshaft-for-r34-nissan-skyline-gt-r-610070/" lang: "en-US" type: "product" description: "Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R   The BNR34 propeller shaft in one piece of high modulus carbon fiber, 3.25 inches in diameter and rated to 1,200HP." last_modified: "2026-11-14T17:50:06+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,235.99</bdi></span>" sku: "610070" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "NISH14-C1" brand: "Driveshaft Shop" part_number: "610070" map: "2235.99" cost: "1898.95" --- # Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R [610070] # Driveshaft Shop Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R Driveshaft Shop’s Carbon Fiber Driveshaft for R34 Nissan Skyline GT-R gives the BNR34 a one-piece propeller shaft in high modulus carbon fiber, 3.25 inches across, in place of the two-piece factory shaft and its center hanger bearing. With the hanger gone, the shaft no longer moves up and down as torque arrives, and the car responds to the throttle faster. DSS rates it at 1,200HP, and it bolts straight in, which matters on a car as sought after as the R34 GT-R. It is the top of the DSS range for the chassis; the aluminum shaft covers most street builds. ### Design and Performance - The factory GT-R propeller shaft is made in two sections joined at a center hanger bearing, and that bearing lets the shaft move up and down when power goes through it. Driveshaft Shop replaces the pair with one 3.25 inch high modulus carbon fiber tube, keeping a CV joint at the rear but with its internals changed to a higher grade of chromoly. The result is a direct bolt-on part: no cutting, no welding, and no change to the transmission or the rear differential. ### Features - 3.25 inch high modulus carbon fiber tube - One-piece design replaces the factory two-piece shaft - Rear CV with internals upgraded to higher-grade chromoly - Sharper throttle response with the hanger bearing gone - Carbon Fiber Driveshaft for R34 GT-R rated to 1,200HP by Driveshaft Shop - Direct bolt-on, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Replaces the factory two-piece driveshaft with a single shaft; no hanger bearing is used** - **The photo shows a representative Driveshaft Shop carbon fiber driveshaft; the length and flanges of the R34 shaft differ** - **The [aluminum driveshaft for the R34](https://bulletproofautomotive.com/product/driveshaft-shop-aluminum-driveshaft-for-r34-nissan-skyline-gt-r-610069/) is also available** - **Level 5 front axles for the same car: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number NISH14-C1** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Carbon Fiber Driveshaft for R34 replace the two-piece factory shaft?** Yes. The Carbon Fiber Driveshaft for R34 is a single shaft that takes the place of the two-piece factory driveshaft and its center hanger bearing. Without the hanger, the shaft no longer moves up and down under throttle, and Driveshaft Shop says the car reacts faster and feels more responsive as a result. - **How much power is the driveshaft rated for?** Driveshaft Shop rates the Carbon Fiber Driveshaft for R34 at 1,200HP. That rating comes from the 3.25 inch high modulus carbon fiber tube and from a rear CV whose internals have been upgraded to a higher grade of chromoly than the factory joint. - **Will this driveshaft fit a rear-wheel-drive R34 Skyline?** No. This shaft is built for the all-wheel-drive R34 Skyline GT-R, chassis code BNR34. Driveshaft Shop makes separate driveshafts for the rear-wheel-drive Skyline models, which use a different shaft, so check the chassis code on the car before ordering. Bulletproof Automotive can help confirm it. - **Should I choose the aluminum or the carbon fiber shaft?** Driveshaft Shop makes both for the R34 GT-R. The carbon fiber shaft uses a 3.25 inch high modulus tube and suits builds where rotating weight and strength both count. The aluminum shaft uses a 3.5 inch 6061-T6 tube, costs less and covers most tuned street cars comfortably. - **What warranty does Driveshaft Shop give on the shaft?** Driveshaft Shop backs the shaft with a 1-year warranty, and every DSS driveshaft is dynamically balanced at over 9,000 RPM before it ships. The part is non-refundable once it has been installed, so confirm the chassis and drivetrain of the car first. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510028]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-left-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510028/" lang: "en-US" type: "product" description: "Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec   The left rear Pro-Level shaft for non V-Spec BNR32, BCNR33 and BNR34 cars: 108mm CVs, 30-spline bar, billet 4340 cages," last_modified: "2026-11-14T17:50:05+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,522.68</bdi></span>" sku: "510028" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "RA8012X5" brand: "Driveshaft Shop" part_number: "510028" map: "1522.68" cost: "1293.72" --- # Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec [510028] # Driveshaft Shop 1400HP Level 5 Left Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R Non V-Spec Driveshaft Shop’s 1400HP Level 5 Rear Axle for R32 / R33 / R34 Nissan Skyline GT-R swaps the factory left rear shaft for the DSS Pro-Level design: a direct-fit outer CV in a proprietary high-grade material, Porsche-style 108mm CV joints at both ends, 30-spline bars and billet 4340 cages. Rated by DSS at 1,400HP, it is built for the RB26DETT cars that have outgrown the factory rears, the ones running big turbos and drag radials. Precision billet adapter plates mount it to the factory differential stubs, so the factory rear differential stays in the car. ### Construction - The center bar is a torsional design that DSS says twists considerably more than a factory unit, so it soaks up part of the shock a high-horsepower launch puts through the driveline instead of passing all of it to the joints. The 108mm CV joints run 30-spline internals in billet 4340 cages, and the billet adapter plate and its hardware are what let the 108mm inner joint meet the factory differential stub. ### Features - Torsional center bar that flexes more than the factory shaft to absorb launch shock - Porsche-style 108mm CV joints at both ends - 30-spline bar with billet 4340 cages - Direct-fit outer CV in a proprietary high-grade material - Billet adapter plate with hardware for the factory differential stub - Rated to 1,400HP by Driveshaft Shop - 1-year Driveshaft Shop warranty ### Applications - **Nissan Skyline GT-R:** BNR32 | 1989-1994 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BCNR33 | 1995-1998 | 2.6L RB26DETT - **Nissan Skyline GT-R:** BNR34 | 1999-2002 | 2.6L RB26DETT ### Notes - **Sold individually: this is the left rear axle only** - **Driveshaft Shop lists this Rear Axle for R32, R33 and R34 GT-R for non V-Spec cars only** - **The [right rear axle](https://bulletproofautomotive.com/product/driveshaft-shop-right-rear-axle-for-r32-r33-r34-skyline-gt-r-non-v-spec-510030/) is sold separately** - **Matching Level 5 front axles are available for the same cars: [left](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-left-front-axle-for-r32-r33-r34-skyline-gt-r-510027/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-level-5-right-front-axle-for-r32-r33-r34-skyline-gt-r-510029/)** - **Driveshaft Shop part number RA8012X5** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Does the Rear Axle for R32 fit V-Spec cars?** No. Driveshaft Shop lists this Rear Axle for R32, R33 and R34 GT-R for non V-Spec cars only. Confirm which model the car is before ordering, because the axle is non-refundable once it has been installed and the V-Spec cars are not covered by this part. - **Is this rear axle sold as a pair?** No. This listing is the left rear axle only. Driveshaft Shop sells the rear axles as a pair on its own site, while the right side is listed separately here, so a car can be fitted with one side or both depending on what the owner needs. - **Do I need to change the rear differential stubs?** No. The axle comes with precision billet adapter plates and hardware that mount its 108mm inner CV to the factory differential stub. Driveshaft Shop designed it that way so the factory differential and its stubs stay in the car, which keeps the job to an axle swap rather than a differential rebuild. - **How much power is the Level 5 rear axle rated for?** Driveshaft Shop rates this rear axle at 1,400HP. The figure comes from the 30-spline bar, the billet 4340 cages and the torsional center bar, which absorbs part of the shock of a hard launch on drag radials rather than passing it straight to the CV joints. - **What warranty applies to the rear axle?** Driveshaft Shop gives the rear axle a 1-year warranty. The part is non-refundable once installed, so Bulletproof Automotive recommends confirming the side, the chassis and the non V-Spec fitment before the axle goes on the car. Our team can check the fitment with you before you order. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R [510253]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/" lang: "en-US" type: "product" description: "Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R   Left front Level 5 shaft for the 2008-2016 R35 GT-R, 300M bar and stub in a chromoly CV housing, rated by DSS to 1,000HP." last_modified: "2026-11-14T17:51:06+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,044.82</bdi></span>" sku: "510253" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "RA8014X5-V2" brand: "Driveshaft Shop" part_number: "510253" map: "1044.82" cost: "892.27" --- # Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R [510253] # Driveshaft Shop 1000HP Level 5 Left Front Axle for R35 Nissan GT-R Driveshaft Shop’s 1000HP Level 5 Front Axle for R35 Nissan GT-R is the left-hand front shaft from the DSS direct bolt-in front set, built around a 300M alloy steel bar and a 300M splined stub inside a chromoly CV housing. Once a VR38DETT has been taken past its factory turbos, launch control and the all-wheel-drive system load the front shafts well beyond what they see at factory power, and DSS rates this axle at 1,000HP. It suits a bolt-on or big-turbo GT-R that sees the strip or the dig; a stock car on street tires does not need it. ### Design and Performance - DSS designed its Level 5 axles for drag racing, and the same parts have since proved themselves in road racing and rally use. On the R35 the upgrade is a matter of materials rather than layout: 300M steel for the bar and the splined stub that carries torque into the hub, and chromoly for the CV housing. The axle is a direct bolt-in replacement for the factory left front shaft, with no modification to the hub or the front differential. ### Features - 300M alloy steel center bar - 300M splined outer stub - Chromoly CV housing - Rated to 1,000HP by Driveshaft Shop - Direct bolt-in Front Axle for R35 GT-R, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan GT-R:** R35 | 2008-2016 | 3.8L VR38DETT ### Notes - **Sold individually: this is the left front axle only** - **The [right front axle](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/) is sold separately** - **Driveshaft Shop lists this axle for 2008-2016 models** - **For the rear, see the [Pro-Level Rear Axle Kit for 2008-2014 cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/) and the [Pro-Level Rear Axle Kit for 2015 and later cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/)** - **Driveshaft Shop part number RA8014X5-V2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Is the Driveshaft Shop Front Axle for R35 sold as a pair?** No. This listing is the left front axle on its own. Driveshaft Shop sells the Level 5 front axles for the GT-R as a pair on its own site, and the right side is listed separately here, so one damaged axle can be replaced without buying both sides. - **Which model years does the Front Axle for R35 fit?** Driveshaft Shop lists the Level 5 Front Axle for R35 GT-R for 2008-2016 models. Some dealers quote a wider range, but this listing follows the manufacturer. For a 2017 or later car, contact Bulletproof Automotive before ordering so the fitment can be confirmed with Driveshaft Shop. - **How much power will the Level 5 front axle handle?** Driveshaft Shop rates the Level 5 front axle at 1,000HP, the same rating it gives the Level 5 front axles for the Skyline GT-R. That covers most bolt-on and upgraded-turbo VR38DETT builds that launch hard on drag radials or sticky street tires, which is where the factory front shafts take the most punishment. - **Does the axle need any modification to install?** No. Driveshaft Shop describes it as a direct bolt-in part with no modification to the hub or the front differential. It goes in the same position, and with the same procedure, as the factory GT-R front axle it replaces, so any shop familiar with the R35 can fit it. - **What warranty comes with the axle?** Driveshaft Shop backs the Level 5 front axle with a 1-year warranty. Like every DSS part, it is non-refundable once it has been installed, so confirm the side and the model year of the car before the axle is fitted. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R [510254]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/" lang: "en-US" type: "product" description: "Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R   The right front Level 5 axle for 2008-2016 R35 GT-R builds: 300M bar and stub, chromoly CV housing, 1,000HP rating." last_modified: "2026-11-14T17:51:52+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,034.48</bdi></span>" sku: "510254" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "RA8015X5-V2" brand: "Driveshaft Shop" part_number: "510254" map: "1034.48" cost: "883.43" --- # Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R [510254] # Driveshaft Shop 1000HP Level 5 Right Front Axle for R35 Nissan GT-R Driveshaft Shop’s 1000HP Level 5 Front Axle for R35 Nissan GT-R completes the right-hand side of the DSS front axle set for the 2008-2016 car. The bar and splined stub are both 300M, an aerospace alloy steel, and they run in a chromoly CV housing; DSS puts the rating at 1,000HP. Repeated launches on a tuned VR38DETT are what wear out and break factory front shafts, and this axle is aimed squarely at owners who have already added the power and the sticky tires. It bolts in where the factory right front axle was. ### Design and Performance - DSS designed its Level 5 axles for drag racing, and the same parts have since proved themselves in road racing and rally use. On the R35 the upgrade is a matter of materials rather than layout: 300M steel for the bar and the splined stub that carries torque into the hub, and chromoly for the CV housing. The axle is a direct bolt-in replacement for the factory right front shaft, with no modification to the hub or the front differential. ### Features - 300M alloy steel center bar - 300M splined outer stub - Chromoly CV housing - Rated to 1,000HP by Driveshaft Shop - Direct bolt-in Front Axle for R35 GT-R, no modification required - 1-year Driveshaft Shop warranty ### Applications - **Nissan GT-R:** R35 | 2008-2016 | 3.8L VR38DETT ### Notes - **Sold individually: this is the right front axle only** - **The [left front axle](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/) is sold separately** - **Driveshaft Shop lists this axle for 2008-2016 models** - **For the rear, see the [Pro-Level Rear Axle Kit for 2008-2014 cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/) and the [Pro-Level Rear Axle Kit for 2015 and later cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/)** - **Driveshaft Shop part number RA8015X5-V2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **Is the Driveshaft Shop Front Axle for R35 sold as a pair?** No. This listing is the right front axle on its own. Driveshaft Shop sells the Level 5 front axles for the GT-R as a pair on its own site, and the left side is listed separately here, so one damaged axle can be replaced without buying both sides. - **Which model years does the Front Axle for R35 fit?** Driveshaft Shop lists the Level 5 Front Axle for R35 GT-R for 2008-2016 models. Some dealers quote a wider range, but this listing follows the manufacturer. For a 2017 or later car, contact Bulletproof Automotive before ordering so the fitment can be confirmed with Driveshaft Shop. - **How much power will the Level 5 front axle handle?** Driveshaft Shop rates the Level 5 front axle at 1,000HP, the same rating it gives the Level 5 front axles for the Skyline GT-R. That covers most bolt-on and upgraded-turbo VR38DETT builds that launch hard on drag radials or sticky street tires, which is where the factory front shafts take the most punishment. - **Does the axle need any modification to install?** No. Driveshaft Shop describes it as a direct bolt-in part with no modification to the hub or the front differential. It goes in the same position, and with the same procedure, as the factory GT-R front axle it replaces, so any shop familiar with the R35 can fit it. - **What warranty comes with the axle?** Driveshaft Shop backs the Level 5 front axle with a 1-year warranty. Like every DSS part, it is non-refundable once it has been installed, so confirm the side and the model year of the car before the axle is fitted. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2008-2014) [510252]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/" lang: "en-US" type: "product" description: "Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2008-2014)   Complete 1400HP rear axle, hub and differential stub kit for the 2008-2014 R35 GT-R, with 33-spline outer CVs and 108mm joints." last_modified: "2026-11-14T17:48:01+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,277.24</bdi></span>" sku: "510252" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" number_of_boxes: "2" regular_stock: "t" units_per_sku: "1" upc: "NI89.2" brand: "Driveshaft Shop" part_number: "510252" map: "4277.24" cost: "3653.84" --- # Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2008-2014) [510252] # Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R _(2008-2014)_ Driveshaft Shop’s 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R is the rear axle, hub and differential stub package DSS builds for 2008-2014 cars only, and DSS says it is the same set of axles found under the fastest GT-Rs in the world. The outer CV is larger than stock, with 33 splines, and Porsche-style 108mm CV joints run at both ends with 30-spline 300M internal races in billet 4340 cages. It is meant for VR38DETT builds well past 1,000HP; below that, the DSS 1,000HP rear kit is the more sensible buy. ### Construction - The center bars are 300M aerospace-grade steel in a torsional design that DSS says twists far more than a factory unit, so part of the shock of a high-power launch is absorbed in the bar instead of the joints. Because the outer stubs carry more splines than the factory hubs accept, the kit includes a set of larger-spline wheel hubs, and the 300M differential stub flange upgrade strengthens the inner end, with all the hardware needed to mount it. ### Features - 33-spline outer CV, larger than stock, in a proprietary high-grade material - Porsche-style 108mm CV joints at both ends - 30-spline 300M internal races with billet 4340 cages - 300M torsional center bars - Pro-Level Rear Axle Kit for R35 GT-R rated to 1,400HP and above by Driveshaft Shop - 1-year Driveshaft Shop warranty ### What’s Included - Pro-Level rear axles _(L/R)_ - 300M differential stub flange upgrade with mounting hardware - Set of larger-spline rear wheel hubs ### Applications - **Nissan GT-R:** R35 | 2008-2014 | 3.8L VR38DETT ### Notes - **Sold as a complete kit for both rear corners** - **Driveshaft Shop lists this kit for 2008-2014 cars only** - **The [Pro-Level Rear Axle Kit for 2015 and later cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/) is a separate part** - **Matching Level 5 front axles: [left](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/)** - **Driveshaft Shop part number NI89.2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **What comes in the Pro-Level Rear Axle Kit for R35?** The Pro-Level Rear Axle Kit for R35 GT-R includes both rear axles, the 300M differential stub flange upgrade with all of its mounting hardware, and a set of larger-spline rear wheel hubs to accept the 33-spline outer stubs. Driveshaft Shop prices it as a complete kit, so nothing else is needed for the rear axles. - **Will this kit fit a 2015 or later GT-R?** No. Driveshaft Shop builds this kit for 2008 to 2014 cars only. Owners of a 2015 or later GT-R need the separate 2015 and later version of the kit, which Bulletproof Automotive also lists and which is linked in the Notes section of this listing. - **Why does the kit include new wheel hubs?** The outer CV stubs on the Pro-Level axles have 33 splines, more than the factory rear stubs, so they will not fit the factory wheel hubs. Driveshaft Shop includes larger-spline hubs in the kit to match, so the larger outer joint has a hub to drive and no machining of the factory parts is needed. - **How much power is the kit rated for?** Driveshaft Shop rates the kit at 1,400HP and above. It sits above the DSS 1,000HP rear axle kit in the range and is aimed at all-out VR38DETT builds on drag radials, where the factory axles, hubs and differential stubs are no longer enough. - **What warranty does the kit carry?** Driveshaft Shop covers the kit with a 1-year warranty. All DSS parts are non-refundable once they have been installed, so confirm the model year of the car against the fitment on this listing before the kit is fitted, and keep the receipt with the build records. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2015-2025) [510340]" url: "https://bulletproof2026.magepitstop.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2015-2025-510340/" lang: "en-US" type: "product" description: "Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2015-2025)   The 2015 and later R35 GT-R version of the DSS Pro-Level rear axle kit, with diff stubs and larger-spline hubs, rated 1,400HP." last_modified: "2026-11-14T17:52:17+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,263.16</bdi></span>" sku: "510340" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" number_of_boxes: "2" regular_stock: "t" units_per_sku: "1" upc: "NI99.2" brand: "Driveshaft Shop" part_number: "510340" map: "4263.16" cost: "3642.85" --- # Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R (2015-2025) [510340] # Driveshaft Shop 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R _(2015-2025)_ Driveshaft Shop’s 1400HP Pro-Level Rear Axle Kit for R35 Nissan GT-R is the version DSS builds for 2015 and later cars, and only for them: rear axles, upgraded 300M differential stub flanges and larger-spline wheel hubs in a single kit. Each axle carries a 33-spline outer CV, larger than stock, and Porsche-style 108mm CV joints at both ends with 30-spline 300M internal races and billet 4340 cages. This is hardware for an all-out VR38DETT build chasing four-figure power on drag radials, not a precaution for a lightly tuned car. ### Construction - The center bars are 300M aerospace-grade steel in a torsional design that DSS says twists far more than a factory unit, so part of the shock of a high-power launch is absorbed in the bar instead of the joints. Because the outer stubs carry more splines than the factory hubs accept, the kit includes a set of larger-spline wheel hubs, and the 300M differential stub flange upgrade strengthens the inner end, with all the hardware needed to mount it. ### Features - 33-spline outer CV, larger than stock, in a proprietary high-grade material - Porsche-style 108mm CV joints at both ends - 30-spline 300M internal races with billet 4340 cages - 300M torsional center bars - Pro-Level Rear Axle Kit for R35 GT-R rated to 1,400HP and above by Driveshaft Shop - 1-year Driveshaft Shop warranty ### What’s Included - Pro-Level rear axles _(L/R)_ - 300M differential stub flange upgrade with mounting hardware - Set of larger-spline rear wheel hubs ### Applications - **Nissan GT-R:** R35 | 2015-2025 | 3.8L VR38DETT ### Notes - **Sold as a complete kit for both rear corners** - **Driveshaft Shop lists this kit for 2015 and later cars only** - **The [Pro-Level Rear Axle Kit for 2008-2014 cars](https://bulletproofautomotive.com/product/driveshaft-shop-1400hp-pro-level-rear-axle-kit-for-r35-gt-r-2008-2014-510252/) is a separate part** - **Matching Level 5 front axles: [left](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-left-front-axle-for-r35-nissan-gt-r-510253/) and [right](https://bulletproofautomotive.com/product/driveshaft-shop-1000hp-level-5-right-front-axle-for-r35-nissan-gt-r-510254/)** - **Driveshaft Shop part number NI99.2** - **Driveshaft Shop parts are non-refundable once they have been installed** ### Frequently Asked Questions - **What comes in the Pro-Level Rear Axle Kit for R35?** The Pro-Level Rear Axle Kit for R35 GT-R includes both rear axles, the 300M differential stub flange upgrade with all of its mounting hardware, and a set of larger-spline rear wheel hubs to accept the 33-spline outer stubs. Driveshaft Shop prices it as a complete kit, so nothing else is needed for the rear axles. - **Will this kit fit a 2008 to 2014 GT-R?** No. Driveshaft Shop builds this kit for 2015 and later cars only. Owners of a 2008 to 2014 GT-R need the separate earlier version of the kit, which Bulletproof Automotive also lists and which is linked in the Notes section of this listing. - **Why does the kit include new wheel hubs?** The outer CV stubs on the Pro-Level axles have 33 splines, more than the factory rear stubs, so they will not fit the factory wheel hubs. Driveshaft Shop includes larger-spline hubs in the kit to match, so the larger outer joint has a hub to drive and no machining of the factory parts is needed. - **How much power is the kit rated for?** Driveshaft Shop rates the kit at 1,400HP and above. It sits above the DSS 1,000HP rear axle kit in the range and is aimed at all-out VR38DETT builds on drag radials, where the factory axles, hubs and differential stubs are no longer enough. - **What warranty does the kit carry?** Driveshaft Shop covers the kit with a 1-year warranty. All DSS parts are non-refundable once they have been installed, so confirm the model year of the car against the fitment on this listing before the kit is fitted, and keep the receipt with the build records. # About Driveshaft Shop The Driveshaft Shop, also known as DSS, has spent more than 30 years designing and manufacturing CV axles and driveshafts for street and competition cars in its own CNC machine shop and manufacturing facility in Salisbury, North Carolina. Its axles and shafts have helped racers set and reset records in front-wheel-drive, rear-wheel-drive and all-wheel-drive classes. Every driveshaft it builds is dynamically balanced at over 9,000 RPM, and it works in steel, aluminum and carbon fiber for sport compact, European and modern muscle applications, with custom builds made to order. --- --- title: "Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-R]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-red-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207-r/" lang: "en-US" type: "product" description: "Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Red parking brake calipers on 12.19in plain face Ultralite HP rotors and aluminum hats, a big rotor rear kit for rear disc Civics" last_modified: "2026-11-14T00:01:19+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,229.20</bdi></span></del> <span class="screen-reader-text">Original price was: $1,229.20.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,097.50</bdi></span></ins><span class="screen-reader-text">Current price is: $1,097.50.</span>" sku: "140-10207-R" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "889545008852" brand: "Wilwood" part_number: "140-10207-R" map: "1097.5" cost: "905.96" --- # Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-R] # Wilwood Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Red Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol puts red Combination Parking Brake calipers on 12.19in Ultralite HP plain face rotors. Wilwood builds its Combination Parking Brake kits mainly for front-wheel drive cars, where the parking brake has to work through the rear disc caliper. ### Features - Red powder coat calipers with internal parking brake - 12.19in plain face Ultralite HP rotors - 32-vane iron rotors on aluminum hats - BP-10 pads with 1.5 cu in of volume - 12.19in Rear Brake Kit for Honda Civic in Wilwood red ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, red powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 12.19in x 0.81in _(309.6mm x 20.6mm)_ - **Rotor:** Ultralite HP, 32 vanes, iron, plain face - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 17in _(some 16in wheels may clear)_ ### What’s Included - Wilwood Combination Parking Brake red calipers _(L/R)_ - 12.19in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **One kit covers the left and right rear corners** - **Built for rear disc cars with a 2.39in axle offset; measure yours against Wilwood’s diagram** - **Lines are not included; Wilwood specifies rear Flexline kit 220-10840** - **Parking brake cable kits 330-10966 and 330-10993 are both listed by Wilwood; contact us to choose** - **Plan on 17in wheels; Wilwood notes some 16in wheels may fit, so check the wheel clearance diagram in the gallery** - **For the same red calipers with drilled rotors, see the [red drilled and slotted 12.19in kit](https://bulletproofautomotive.com/product/wilwood-red-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-dr/)** - **For 15in wheels, see the [Wilwood 11in red plain face rear kit](https://bulletproofautomotive.com/product/wilwood-red-plain-11in-rear-brake-kit-for-honda-civic-140-10206-r/)** ### Frequently Asked Questions - **Why choose the plain face red 12.19in Rear Brake Kit for Honda Civic?** The plain face red 12.19in Rear Brake Kit for Honda Civic uses Ultralite HP vented rotors and costs less than the drilled version. Calipers, pads and rotor size are the same in both kits, so the choice mostly comes down to looks. - **Does my car need rear disc brakes from the factory?** Yes. Wilwood lists this kit for cars originally built with rear disc brakes and a 2.39 inch axle offset. Civics built with rear drums use different Wilwood kits, and Bulletproof Automotive can help you find the one that matches your axle. - **What else is needed for the install?** Wilwood specifies rear Flexline kit 220-10840 and lists parking brake cable kits 330-10966 and 330-10993. Fresh high temperature brake fluid is needed for the bleed, and the handbrake should be adjusted once the new cables are connected to the calipers. - **Is BP-10 a good pad for my car?** BP-10 is the Wilwood street compound and comes in the D340 shape with 4.0 square inches of area. It suits a Civic or Integra driven on the street, and Bulletproof Automotive can check other Wilwood pad compounds for cars that spend more time on track. - **Can I get the calipers in another finish?** Yes. Red and black are the standard finishes, and Wilwood can supply other colors at extra cost. Let Bulletproof Automotive know the color you want and we will confirm availability, price and lead time with Wilwood for you before you commit. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-DR]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-red-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-dr/" lang: "en-US" type: "product" description: "Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Gloss red parking brake calipers over 12.19in SRP drilled and slotted rotors with aluminum hats, for rear disc Civics, Integras and del" last_modified: "2026-11-14T00:01:20+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,388.59</bdi></span></del> <span class="screen-reader-text">Original price was: $1,388.59.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,239.81</bdi></span></ins><span class="screen-reader-text">Current price is: $1,239.81.</span>" sku: "140-10207-DR" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "889545008845" brand: "Wilwood" part_number: "140-10207-DR" map: "1239.81" cost: "1021.23" --- # Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-DR] # Wilwood Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Red Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol suits a car already wearing red Wilwood calipers up front. Red Combination Parking Brake calipers ride over 12.19in SRP drilled and slotted rotors, and the handbrake still works through a lock built into each caliper. ### Features - Gloss red powder coat Combination Parking Brake calipers - 12.19in SRP drilled and slotted rotors in black E-coat - Two-piece rotors on aluminum short-offset hats - D340 pads with 4.0 sq in of area - 12.19in Rear Brake Kit for Honda Civic to match red front calipers ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, red powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 12.19in x 0.81in _(309.6mm x 20.6mm)_ - **Rotor:** SRP drilled and slotted, 32 vanes, iron, black E-coat - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 17in _(some 16in wheels may clear)_ ### What’s Included - Wilwood Combination Parking Brake red calipers _(L/R)_ - 12.19in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Covers both rear corners in one kit** - **Requires factory rear disc brakes and a 2.39in axle offset; check the measurement before ordering** - **Brake lines are not part of the kit; Wilwood specifies rear Flexline kit 220-10840** - **Wilwood lists cable kits 330-10966 and 330-10993 for the parking brake; contact us to confirm the right one** - **Wilwood rates the kit for 17in wheels and says some 16in wheels may clear; see the wheel clearance diagram in the gallery** - **Want plain rotors with the red calipers? See the [red plain face 12.19in kit](https://bulletproofautomotive.com/product/wilwood-red-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207-r/)** - **For 15in wheels, see the [Wilwood 11in red drilled rear kit](https://bulletproofautomotive.com/product/wilwood-red-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-dr/)** ### Frequently Asked Questions - **Will the red 12.19in Rear Brake Kit for Honda Civic fit behind 16 inch wheels?** Possibly. Wilwood lists 17 inch wheels as the minimum for the red 12.19in Rear Brake Kit for Honda Civic and says some 16 inch wheels may clear. Check the wheel clearance diagram in the gallery, or send us your wheel details first. - **Which Civic models does Wilwood cover?** For the Civic, Wilwood lists the 1992-1995 Si hatchback, the rear disc EX coupe and EX sedan from 1992 to 1995 and the 1999-2000 Si coupe. The rear disc del Sol from 1993 to 1997 and the 1990-1991 CRX Si are covered as well. - **Are lines and cables included?** No. Wilwood specifies rear Flexline kit 220-10840 and lists parking brake cable kits 330-10966 and 330-10993, all sold separately. Bulletproof Automotive can match the cable kit to your car and ship everything together with the brake kit in one order. - **Why would I choose this over the 11 inch kit?** The 12.19 inch rotor gives the caliper a longer lever arm than the 11 inch rotor, using the same calipers and pads. It needs a larger wheel to clear, so it suits cars already running 17 inch wheels or some 16 inch wheels. - **Can Wilwood paint the calipers another color?** Yes. Red and black are standard, and Wilwood offers other caliper colors at extra cost. Tell Bulletproof Automotive the color you want and we will check availability, price and lead time with Wilwood and quote it for you before ordering. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-D]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-black-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-d/" lang: "en-US" type: "product" description: "Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers over 12.19in SRP drilled and slotted rotors in black E-coat, a big rotor rear kit for Civics, Integras" last_modified: "2026-11-14T00:01:22+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,388.59</bdi></span></del> <span class="screen-reader-text">Original price was: $1,388.59.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,239.81</bdi></span></ins><span class="screen-reader-text">Current price is: $1,239.81.</span>" sku: "140-10207-D" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "889545008838" brand: "Wilwood" part_number: "140-10207-D" map: "1239.81" cost: "1021.23" --- # Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207-D] # Wilwood Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Black Drilled and Slotted 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol fits black Combination Parking Brake calipers over 12.19in SRP drilled and slotted rotors. The black E-coat on the rotors and hats resists corrosion, and the factory handbrake lever operates the lock inside each caliper. ### Features - 12.19in SRP drilled and slotted rotors with 32 vanes - Black E-coat finish on rotors and hats - Black powder coat calipers with built-in parking brake - Single 1.34in steel piston per caliper - 12.19in Rear Brake Kit for Honda Civic with BP-10 pads ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, black powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 12.19in x 0.81in _(309.6mm x 20.6mm)_ - **Rotor:** SRP drilled and slotted, 32 vanes, iron, black E-coat - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 17in _(some 16in wheels may clear)_ ### What’s Included - Wilwood Combination Parking Brake black calipers _(L/R)_ - 12.19in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Sold as a complete kit for both rear wheels** - **For rear disc cars with a 2.39in axle offset; verify the offset against Wilwood’s diagram first** - **Lines are sold separately; Wilwood specifies rear Flexline kit 220-10840** - **Two parking brake cable kits are listed by Wilwood, 330-10966 and 330-10993; contact us to pick the right one** - **17in is Wilwood’s listed minimum wheel, and some 16in wheels may fit; compare the wheel clearance diagram in the gallery** - **The [black plain face 12.19in kit](https://bulletproofautomotive.com/product/wilwood-black-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207/) uses the same calipers with plain rotors** - **For 15in wheels, see the [Wilwood 11in black drilled rear kit](https://bulletproofautomotive.com/product/wilwood-black-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-d/)** ### Frequently Asked Questions - **Is the drilled and slotted 12.19in Rear Brake Kit for Honda Civic a performance upgrade over the plain face kit?** The drilled and slotted 12.19in Rear Brake Kit for Honda Civic shares its calipers, pads and rotor size with the plain face kit. The SRP rotors are chosen mostly for appearance and to match a front kit with drilled rotors. - **How does the handbrake work with these calipers?** A mechanical lock sits inside each Combination Parking Brake caliper. The factory lever pulls a cable to the caliper arm and clamps the pads, and Wilwood lists cable kits 330-10966 and 330-10993 to connect the new calipers to the car. - **Does it fit my Integra?** Wilwood lists every 1990-1996 Integra and the 1997-2001 Integra except the Type R. The car needs factory rear disc brakes and a 2.39 inch axle offset, so measure the offset against the Wilwood diagram in the gallery before you place the order. - **What does installation involve?** The factory rear calipers and rotors come off, the Wilwood brackets bolt to the spindle with thread locker and the hats and rotors go on the factory hubs. New lines and cables are fitted, then the brakes are bled and the handbrake is adjusted. - **Which pads come in the kit?** The kit ships with Wilwood BP-10 pads in the D340 shape, with 4.0 square inches of area and 1.5 cubic inches of volume. BP-10 is the Wilwood street compound and suits a Civic or Integra that is driven mainly on the street. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-black-plain-12-19in-rear-brake-kit-for-honda-civic-140-10207/" lang: "en-US" type: "product" description: "Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers on 12.19in Ultralite HP vented rotors and aluminum hats, the big rotor rear kit for rear disc Civics, Integras" last_modified: "2026-11-14T00:01:25+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,229.20</bdi></span></del> <span class="screen-reader-text">Original price was: $1,229.20.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,097.50</bdi></span></ins><span class="screen-reader-text">Current price is: $1,097.50.</span>" sku: "140-10207" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "889545008821" brand: "Wilwood" part_number: "140-10207" map: "1097.5" cost: "905.96" --- # Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10207] # Wilwood Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Black Plain Face 12.19in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol is the large rotor version of its Honda parking brake rear kit. Black Combination Parking Brake calipers clamp 12.19in Ultralite HP rotors on aluminum hats, and a mechanical lock in each caliper body runs the handbrake. ### Features - Black powder coat Combination Parking Brake calipers - 12.19in Ultralite HP rotors with 32 cooling vanes - Aluminum short-offset hats in black E-coat - BP-10 street pads in the D340 shape - 12.19in Rear Brake Kit for Honda Civic sized for 17in wheels ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, black powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 12.19in x 0.81in _(309.6mm x 20.6mm)_ - **Rotor:** Ultralite HP, 32 vanes, iron, plain face - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 17in _(some 16in wheels may clear)_ ### What’s Included - Wilwood Combination Parking Brake black calipers _(L/R)_ - 12.19in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Covers both rear corners** - **Fits cars that left the factory with rear disc brakes and a 2.39in axle offset; measure the offset before ordering** - **Brake lines are not included; Wilwood specifies rear Flexline kit 220-10840** - **Wilwood lists parking brake cable kits 330-10966 and 330-10993; contact us to confirm which one your car needs** - **Wilwood lists 17in as the minimum wheel and notes some 16in wheels may clear; check the wheel clearance diagram in the gallery** - **For the same black calipers with drilled rotors, see the [black drilled and slotted 12.19in kit](https://bulletproofautomotive.com/product/wilwood-black-drilled-12-19in-rear-brake-kit-for-honda-civic-140-10207-d/)** - **Running 15in wheels? See the [Wilwood 11in black plain face rear kit](https://bulletproofautomotive.com/product/wilwood-black-plain-11in-rear-brake-kit-for-honda-civic-140-10206/)** ### Frequently Asked Questions - **What wheels does the Wilwood 12.19in Rear Brake Kit for Honda Civic need?** Wilwood lists 17 inch wheels as the minimum for this 12.19in Rear Brake Kit for Honda Civic and notes that some 16 inch wheels may clear. Print the wheel clearance diagram from the gallery and check it against your wheel before ordering. - **How is it different from the 11 inch kit?** Both kits use the same Combination Parking Brake calipers, D340 pads and aluminum hats. This kit moves up to a 12.19 inch rotor, which needs a larger wheel, while the 11 inch kit is rated for 15 inch wheels and up. - **Which cars does Wilwood list for it?** Wilwood lists rear disc Hondas and Acuras with a 2.39 inch axle offset: the 1990-2001 Integra except the Type R, the rear disc Civic Si and EX models of the 1990s, the rear disc del Sol and the 1990-1991 CRX Si. - **What parts are sold separately?** Wilwood specifies rear Flexline kit 220-10840 and lists parking brake cable kits 330-10966 and 330-10993 for these calipers. Bulletproof Automotive can confirm which cable kit suits your car and add the lines and cables to the same order as the brake kit. - **Can I order a different caliper color?** Black and red are the standard finishes. Wilwood can supply other caliper colors at extra cost, so send Bulletproof Automotive the finish you want and we will get the price and lead time from Wilwood for you before anything is ordered. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "AL13 Lux Series LUX09 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux09-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX09 Three-Piece sets the Lux Series’ dense multi-spoke face inside a separate outer lip, with each slim spoke opening into a rounded, slotted loop at the edge. Diameter, width, and offset are set independently for flush or widebody" last_modified: "2026-11-13T23:27:18+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX09 Three-Piece Wheel # AL13 Lux Series LUX09 Three-Piece Wheel The AL13 LUX09 Three-Piece takes the dense, loop-tipped spoke design of the LUX09 and builds it on AL13’s modular three-piece construction, with a separate outer lip framing the face. Lux Series wheels run their designs all the way to the outer edge, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX09 combines heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX09 - On the LUX09 Three-Piece, slim spokes radiate from a compact hub in a tight pattern. Each one widens near the lip and opens into a rounded loop with a slot through the center. Where those loops meet the separate lip, they form a ring of openings around the edge, giving the wheel a crisp border. As width increases and offset drops, the loops sit deeper in the barrel behind a stepped lip. The design echoes the wire wheels on classic luxury cars and adds a machined detail at the edge that stands out on modern builds. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX09 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX09 Three-Piece can be built with hidden or exposed hardware. Hidden hardware, as shown, keeps the lip smooth so the ring of looped tips stays the focus. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for more detail, and since titanium is lighter than steel, it also trims a little unsprung weight. Titanium finishes are PVD Black, Raw Titanium, and Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX09 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX09 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX09 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX09 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux09-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **How is the LUX09 Three-Piece different from the LUX09 Monoblock?** Both share the same dense spoke face with looped tips. The AL13 LUX09 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX09 Monoblock is forged as one piece, runs its spokes right to the rim, and is the lighter of the two. - **Can the spokes and lip be finished differently?** Yes. The center and outer lip of the LUX09 Three-Piece are separate components, so each one can take its own finish. A contrasting lip outlines the looped tips and makes the edge detail stand out, while a matched finish keeps the AL13 LUX09 Three-Piece understated and lets the spoke pattern carry the design. - **Should I choose hidden or exposed hardware?** Hidden hardware keeps the LUX09 Three-Piece clean, so the ring of looped tips meets a smooth, uninterrupted lip. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for extra detail, with a small weight saving over steel. Because the tips already add a lot of detail at the edge, most builds go hidden. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX09 Three-Piece available in?** The AL13 LUX09 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX09 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux09-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX09 Monoblock brings a dense multi-spoke design to the Lux Series. Each slim spoke opens into a rounded, slotted loop at the rim. Every LUX09 Monoblock is forged in one piece and built to order in 19\" to" last_modified: "2026-11-13T23:28:00+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX09 Monoblock Wheel # AL13 Lux Series LUX09 Monoblock Wheel The AL13 LUX09 Monoblock is a dense multi-spoke design for AL13’s Lux Series. Each slim spoke ends in an open loop where it meets the rim, a detail that sets it apart from the other designs in the line. Lux Series wheels carry their designs out to the very edge, so each one looks larger and more refined than a typical design of the same diameter. The LUX09 pairs heritage styling with modern machining, works on almost any car, and has become one of AL13’s top-selling wheels worldwide. ### LUX09 - The spokes on the LUX09 Monoblock start at a compact hub and spread out in a tight radial pattern, close in density to the LUX03 and LUX08. Near the rim, each spoke widens and opens into a rounded loop with a slot cut through the middle, like the eye of a needle. That gives the outer edge a ring of repeated openings that catch light and shadow differently from the solid tips used on other Lux designs. The look nods to the wire wheels of classic luxury cars and adds a machined detail at the edge that rewards a closer look. On large sedans and SUVs, the LUX09 Monoblock fills the wheel arch while staying light and detailed. ### Lightweight Performance. Engineered Strength. - Each LUX09 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. The one-piece forging lets the slim spokes and looped tips carry real loads at a weight no cast wheel of this design could reach. Less unsprung and rotating mass helps the suspension respond quickly and keeps the car settled over broken pavement. The LUX09 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX09 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX09 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX09 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX09 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux09-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **What makes the LUX09 Monoblock different from other dense Lux designs?** It comes down to the spoke tips. The LUX03 ends each spoke in a pointed blade, and the LUX08 keeps an even width to the rim. On the AL13 LUX09 Monoblock, each spoke opens into a rounded loop with a slot through the center, which creates a ring of openings around the outer edge. - **Do the looped spoke tips affect strength?** No. The loops on the LUX09 Monoblock are machined into a single forged piece of aluminum, so the spoke and rim are one continuous structure. AL13 engineers each wheel around your vehicle’s weight, bolt pattern, and brake package. The open tips are a styling detail, and the AL13 LUX09 Monoblock is still suitable for large sedans and SUVs. - **Is the LUX09 Monoblock hard to clean?** It takes more care than a simple five-spoke because of the number of spokes and the slots in each tip. A soft, long-handled wheel brush reaches between the spokes on the AL13 LUX09 Monoblock, and a small detail brush cleans the loops quickly. A ceramic coating on the face makes brake dust much easier to rinse away. - **Which diameters suit the LUX09 Monoblock best?** The looped tips have the most presence at 22″ and above, where each one is large enough to read clearly from a distance. At 19″ to 21″, the AL13 LUX09 Monoblock shows a finer, mesh-like pattern that suits sports sedans and coupes, while bigger diameters suit full-size luxury cars and SUVs. - **What sizes is the LUX09 Monoblock available in?** The AL13 LUX09 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX08 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux08-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX08 Three-Piece sets the Lux Series’ dense multi-spoke face, with dozens of slim spokes radiating from a wide center disc, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with" last_modified: "2026-11-13T23:01:43+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX08 Three-Piece Wheel # AL13 Lux Series LUX08 Three-Piece Wheel The AL13 LUX08 Three-Piece takes the dense multi-spoke face of the LUX08 and builds it on AL13’s modular three-piece construction. A separate outer lip frames dozens of slim spokes and a wide center disc. Lux Series wheels carry their designs to the outer edge, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX08 blends heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX08 - On the LUX08 Three-Piece, a broad, round center disc with machined steps sits around the cap. Thin, straight spokes of even width run from its edge out to the inner edge of the lip, each with a fine center line. The spokes are packed almost as tightly as on the LUX03, and the wide center and parallel spokes give the face a quieter, more formal look. The separate lip adds a defined border around that fine pattern. As width increases and offset drops, it becomes a deeper, stepped lip, a profile long associated with multi-spoke wheels on flagship luxury cars. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX08 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX08 Three-Piece can be assembled with hidden or exposed hardware. Hidden hardware, as shown, keeps the lip smooth so the dense spoke pattern stays the focus. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for extra detail, and because titanium is lighter than steel, it trims a little unsprung weight. Titanium finishes are PVD Black, Raw Titanium, and Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX08 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX08 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits within the wide center disc, which frames it more prominently than a typical spoke hub. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX08 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX08 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux08-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **How is the LUX08 Three-Piece different from the LUX08 Monoblock?** Both share the same dense spoke face and wide center disc. The AL13 LUX08 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX08 Monoblock is forged as one piece, runs its spokes right to the rim, and is the lighter of the two. - **How does the lip change the look of the LUX08 Three-Piece?** On the monoblock, the fine spokes run straight into the rim. On the AL13 LUX08 Three-Piece, they end at a separate lip that outlines the whole pattern and gives it a clear border. A narrow, higher-offset spec keeps the lip thin, while wider widths and lower offsets set the spokes deeper in the barrel for a stepped, deep-dish profile. - **Can the spokes and lip be finished differently?** Yes. The center and outer lip of the LUX08 Three-Piece are separate components, so each can take its own finish. A contrasting lip draws a sharp line around the dense spoke pattern, and a matched finish lets the fine spokes and wide center disc carry the design on their own. Either way, the AL13 LUX08 Three-Piece is finished to your spec. - **Should I choose hidden or exposed hardware?** With a pattern this detailed, hidden hardware is usually the cleaner choice. It leaves a smooth lip around the LUX08 Three-Piece and keeps the attention on the spokes. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for extra detail, with a small weight saving over steel. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX08 Three-Piece available in?** The AL13 LUX08 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX08 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux08-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX08 Monoblock fills the Lux Series face with dozens of slim, even-width spokes that radiate from a wide center disc to the rim, giving a dense, formal multi-spoke look. Each LUX08 Monoblock is forged in one piece and" last_modified: "2026-11-13T23:03:11+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX08 Monoblock Wheel # AL13 Lux Series LUX08 Monoblock Wheel The AL13 LUX08 Monoblock fills AL13’s Lux Series with one of its densest spoke patterns: dozens of slim spokes radiating from a wide, flat center disc. All Lux Series wheels are built around elegant multi-spoke layouts that run to the outer edge, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX08 pairs heritage styling with modern machining, looks right on almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX08 - The LUX08 Monoblock has a broad, round center disc with machined steps around the cap. The spokes start at the edge of that disc rather than at a narrow hub. They’re thin and straight, each with a fine center line, and they keep an even width all the way to the rim. That gives the face a tight, uniform pattern similar to the spokes of a classic wire wheel. In density, it’s a close match to the LUX03, but the larger center and parallel spokes give the LUX08 a calmer, more formal look. On full-size luxury sedans and SUVs, the LUX08 Monoblock fills the wheel arch with fine detail, and the big center disc gives the design a strong focal point. ### Lightweight Performance. Engineered Strength. - Each LUX08 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. Forging the wheel in one piece makes the many slim spokes strong enough for heavy vehicles, which a cast wheel of this design couldn’t manage, and it saves weight too. Less unsprung and rotating mass helps the suspension respond quickly and keeps the car composed on rough pavement. The LUX08 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX08 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX08 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits within the wide center disc, which frames it more prominently than a typical spoke hub. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX08 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX01 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux08-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **How is the LUX08 Monoblock different from the LUX03 Monoblock?** Both pack dozens of slim spokes into the face, and they’re close in density. The LUX03 spokes start at a compact hub and widen into pointed, blade-like tips. The AL13 LUX08 Monoblock starts its spokes at a wide center disc and keeps them an even width to the rim, so the pattern looks more uniform and formal. - **What does the wide center disc add to the LUX08 Monoblock?** It gives the dense spoke pattern a calm, solid center. On the AL13 LUX08 Monoblock, the disc carries machined steps around the cap and fills the space where a typical hub would be. That frames any center cap or OEM badge prominently, and it keeps the wheel from looking busy right at its center. - **Is the LUX08 Monoblock a wire wheel?** No. It echoes the look of the laced wire wheels found on classic luxury cars, but the LUX08 Monoblock is forged and machined from a single piece of aluminum. You get the fine, even spoke pattern without the upkeep of a true wire wheel, such as truing or re-tensioning spokes, and with the strength of a modern forged wheel. - **Which vehicles suit the LUX08 Monoblock?** The dense, formal pattern of the AL13 LUX08 Monoblock is a natural fit for flagship sedans, luxury SUVs, and grand tourers, especially at 22″ and above, where the slim spokes have room to read clearly. At smaller diameters, the pattern takes on a finer, mesh-like look that also works on coupes and sports sedans. - **What sizes is the LUX08 Monoblock available in?** The AL13 LUX08 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX07 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux07-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX07 Three-Piece sets the Lux Series’ directional finned-spoke face, with a curved fin sweeping off one side of each slim spoke, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments," last_modified: "2026-11-13T22:21:27+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Wheel Direction: "Left Side" Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX07 Three-Piece Wheel # AL13 Lux Series LUX07 Three-Piece Wheel The AL13 LUX07 Three-Piece takes the directional finned-spoke design of the LUX07 and builds it on AL13’s modular three-piece construction, with a separate outer lip framing the face. Lux Series wheels carry their designs all the way to the outer edge, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX07 combines heritage styling with modern machining, works on almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX07 - On the LUX07 Three-Piece, slim, straight spokes run from a compact hub to the inner edge of the lip. A curved fin grows off one side of each spoke and sweeps into the open space beside it. Seen head-on, the spokes stay crisp and orderly, and the fins add layers and a sense of rotation between them. The separate lip gives the pattern a defined border, and it steps deeper into the barrel as width increases and offset drops. The LUX07 is directional and is built as mirrored left- and right-side wheels, so the fins face the same way relative to forward travel on both sides of the car. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX07 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX07 Three-Piece can be assembled with hidden or exposed hardware. Hidden hardware, as shown, keeps the lip smooth, so the spokes and fins end at a clean, uninterrupted edge. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more technical look, and since titanium is lighter than steel, it trims a little unsprung weight. Titanium is available in PVD Black, Raw Titanium, or Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX07 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX07 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Directional spokes - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX07 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX07 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux07-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **Do I need left and right wheels for the LUX07 Three-Piece?** Yes. The LUX07 Three-Piece is a directional design, with a curved fin on the same side of every spoke, so the fins need to face the same way relative to forward travel on both sides of the car. AL13 builds mirrored left- and right-side wheels, and you choose the direction for each wheel when ordering. Directional wheels can’t be swapped from side to side during tire rotations. - **How is the LUX07 Three-Piece different from the LUX07 Monoblock?** Both share the same directional finned-spoke face. The AL13 LUX07 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX07 Monoblock is forged as one piece, runs its spokes right to the rim, and is the lighter of the two. - **How does lip depth change the look of the LUX07 Three-Piece?** With a narrower, higher-offset spec, the spokes and fins of the LUX07 Three-Piece reach close to the edge behind a thin band of lip. Wider widths and lower offsets push the face deeper into the barrel behind a stepped lip, which adds shadow around the fins and makes the directional sweep more pronounced. We’ll go over the expected lip depth for your spec before production. - **Should I choose hidden or exposed hardware?** Hidden hardware keeps the LUX07 Three-Piece clean, so the spokes and fins end at a smooth, uninterrupted lip and the directional pattern stays the focus. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more technical, motorsport look, with a small weight saving over steel. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX07 Three-Piece available in?** The AL13 LUX07 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX07 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux07-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX07 Monoblock brings a directional multi-spoke design to the Lux Series, with a curved fin sweeping off one side of each slim spoke. Each LUX07 Monoblock is forged in one piece, built in mirrored left and right versions," last_modified: "2026-11-13T22:22:32+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Wheel Direction: "Left Side" Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX07 Monoblock Wheel # AL13 Lux Series LUX07 Monoblock Wheel The AL13 LUX07 Monoblock brings a directional multi-spoke design to AL13’s Lux Series. Each slim spoke has a curved fin along one side, so the face looks like it’s turning even when the car is parked. Lux Series wheels carry their designs all the way to the outer edge, which makes each wheel look larger and more refined than a typical design of the same diameter. The LUX07 combines heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX07 - On the LUX07 Monoblock, straight spokes radiate from a compact hub out to the rim, much like the open layout of the LUX06. The difference is the fin. Partway out, a thin curved web grows off one side of each spoke and sweeps into the gap toward the next spoke. From the front, the spokes look like a crisp, classic multi-spoke, while the fins add layers and movement in the spaces between them. Because every fin sits on the same side, the LUX07 is built as left- and right-side wheels, so the fins point the same way relative to forward travel on both sides of the car. ### Lightweight Performance. Engineered Strength. - Each LUX07 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. The one-piece forging gives the slim spokes and thin fins strength that casting can’t match, and the wheel ends up lighter as well. Less unsprung and rotating mass helps the suspension respond quickly and keeps the car settled over rough pavement. The LUX07 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX07 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX07 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Directional spokes - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX07 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX07 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux07-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **Do I need left and right wheels for the LUX07 Monoblock?** Yes. The LUX07 Monoblock is a directional design, with a curved fin on the same side of every spoke, so the fins have to face the same way relative to forward travel on both sides of the car. AL13 builds mirrored left- and right-side wheels, and you choose the direction for each wheel when ordering. Directional wheels can’t be swapped from side to side during tire rotations. - **What are the fins on the LUX07 Monoblock?** Each spoke on the AL13 LUX07 Monoblock has a thin, curved web along one side. It starts partway out from the hub and sweeps into the gap toward the next spoke. The fins are forged and machined as part of the wheel, not added afterward. They give an otherwise open spoke pattern extra depth and a sense of rotation. - **How is the LUX07 Monoblock different from the LUX04 and LUX06?** All three are Lux Series designs, but each one is built differently. The LUX06 uses plain, straight spokes and is non-directional. The LUX04 replaces spokes with wide, angled blades. The AL13 LUX07 Monoblock sits between them, combining slim straight spokes with curved side fins for a more open face than the LUX04 and more movement than the LUX06. - **Will my brakes be visible behind the LUX07 Monoblock?** Partly. The straight spokes of the LUX07 Monoblock leave plenty of open space, but the fins cover some of each gap toward the outer edge. Calipers and rotors show clearly near the hub and are partly framed by the fins farther out. Caliper clearance is checked for your vehicle when the offset and spec are finalized. - **What sizes is the LUX07 Monoblock available in?** The AL13 LUX07 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4 [12-116829]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b1-front-strut-mount-for-e36-bmw-3-series-z3-e85-z4-12-116829/" lang: "en-US" type: "product" description: "BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4   Direct replacement front strut mount for the E36 3 Series, Z3 and E85 / E86 Z4, sold individually with two needed per car." last_modified: "2026-11-13T22:11:18+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>70.00</bdi></span></del> <span class="screen-reader-text">Original price was: $70.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>43.00</bdi></span></ins><span class="screen-reader-text">Current price is: $43.00.</span>" sku: "12-116829" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860491721" brand: "Bilstein" part_number: "12-116829" map: "43.0" cost: "39.94" --- # BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4 [12-116829] # BILSTEIN B1 Front Strut Mount for E36 BMW 3 Series, Z3 and E85 / E86 Z4 BILSTEIN’s B1 Front Strut Mount is a direct replacement upper mount for the front struts of the E36 BMW 3 Series, the Z3 and the E85 / E86 Z4. It belongs to the B1 OE Replacement range, the parts BILSTEIN makes to restore the original suspension. BILSTEIN lists two per car, one for each front strut, and also requires this mount with its EVO R coilovers for the E36 3 Series. ### Design and Performance - BILSTEIN describes its B1 OE Replacement components as direct replacement parts that extend the operating life of the suspension, with strut mounts there to keep the struts firmly in place. This one is finished in black paint and made in Germany. Because it is sold individually, a car needs two, and replacing both sides together keeps the front of the car even from left to right. ### Features - Direct replacement front strut mount for the E36 3 Series, Z3 and E85 / E86 Z4 - Keeps each front strut firmly in place, as BILSTEIN describes its B1 strut mounts - Required by BILSTEIN with its EVO R coilovers for the E36 3 Series - The B1 Front Strut Mount is made in Germany, finished in black paint and covered by the BILSTEIN Limited 90-Day Warranty ### Specifications - **Type:** OE replacement strut mount - **Position:** Front - **Finish:** Black paint - **Quantity per vehicle:** 2 - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **BMW 318i:** E36 | 1991-1998 - **BMW 318is:** E36 | 1992-1997 - **BMW 318ti:** E36 | 1995-1999 - **BMW 323i and 323is:** E36 | 1998-1999 - **BMW 325i:** E36 | 1991-1995 - **BMW 328i and 328is:** E36 | 1996-1999 - **BMW Z3 Roadster:** 1996-2002 - **BMW Z3 Coupe:** 1999-2002 - **BMW Z3 M Roadster:** 2000 - **BMW Z3 M Coupe:** 2001 - **BMW Z4 2.5i and 3.0i:** E85 | 2003-2005 - **BMW Z4 Roadster 3.0i and 3.0si:** E85 | 2006-2008 - **BMW Z4 Coupe 3.0si:** E86 | 2006-2008 ### Notes - **Sold individually: BILSTEIN specifies a quantity of 2 per vehicle, one for each front strut** - **BILSTEIN states that this mount must be used with its [EVO R Coilovers for E36 BMW 3 Series](https://bulletproofautomotive.com/product/bilstein-evo-r-coilovers-for-e36-bmw-3-series-89-317594/)** ### Frequently Asked Questions - **How many BILSTEIN B1 Front Strut Mounts does a car need?** BILSTEIN specifies a quantity of two B1 Front Strut Mounts per vehicle, one for each front strut, and the mount is sold individually. Order two to do both sides of the car at once, which keeps the front suspension even from left to right. - **Do I need this mount with BILSTEIN EVO R coilovers?** Yes, on the E36 3 Series. BILSTEIN states that strut mount 12-116829 must be used with its EVO R coilover kit for the E36, so the mounts are best ordered together with the coilovers. Bulletproof Automotive links the two listings so that both parts are easy to find. - **Does the mount fit the Z3 and Z4?** BILSTEIN lists the mount for the front of the Z3 Roadster from 1996 and the Z3 Coupe from 1999, both through 2002, the Z3 M Roadster and M Coupe, and the E85 and E86 Z4 from 2003 to 2008, including the 2.5i, 3.0i and 3.0si. - **Is this an OE replacement part?** Yes. It belongs to the BILSTEIN B1 OE Replacement range, which BILSTEIN describes as direct replacement suspension parts that extend the operating life of the suspension. The strut mount keeps the strut firmly in place, and it is finished in black paint. - **What warranty covers the strut mount?** BILSTEIN covers its B1 component parts, including this strut mount, with its Limited 90-Day Warranty. The mount is made in Germany, and Bulletproof Automotive handles any warranty claim with BILSTEIN for the owner, so support comes from the place the part was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra [14-292408]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b1-active-to-passive-conversion-kit-g29-bmw-z4-a90-gr-supra-14-292408/" lang: "en-US" type: "product" description: "BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra   Lets non-electronic dampers go onto a G29 Z4 or A90 GR Supra built with electronic damping, plug and play and without warning lights." last_modified: "2026-11-13T22:06:39+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>536.00</bdi></span>" sku: "14-292408" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" clearance_item: "t" upc: "651860887388" brand: "Bilstein" part_number: "14-292408" map: "536.0" cost: "455.45" --- # BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra [14-292408] # BILSTEIN B1 Active to Passive Conversion Kit for G29 BMW Z4 and A90 Toyota GR Supra BILSTEIN’s B1 Active to Passive Conversion Kit allows non-electronic dampers to be installed on a G29 BMW Z4 or A90 Toyota GR Supra that left the factory with electronic damping. It connects plug and play to the factory wiring harness and stops the warning indicators that appear once the factory electronic dampers are removed. BILSTEIN designs each of its conversion kits for one platform, and this one covers the shared Z4 and GR Supra chassis. ### Design and Performance - Removing the factory electronic dampers from these cars triggers warning indicators on the dash. The conversion kit is what lets a passive coilover kit, such as BILSTEIN EVO T1, go onto a car built with electronic suspension and keep the dash clear afterwards. BILSTEIN supplies all required components and instructions, and one kit converts the front and rear of the car. ### Features - Allows non-electronic dampers on a G29 Z4 or A90 GR Supra built with factory electronic damping - Plug and play with the factory wiring harness - Stops the warning indicators triggered by removing the factory electronic dampers - The B1 Active to Passive Conversion Kit is made in Germany, includes all components and instructions, and carries the BILSTEIN Limited 90-Day Warranty ### Specifications - **Function:** Active to passive suspension conversion - **Connection:** Plug and play with the factory wiring harness - **Position:** Front and rear - **Quantity per vehicle:** 1 - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **BMW Z4 sDrive30i:** G29 | 2019-2026 - **BMW Z4 M40i, including sDrive M40i and M40i First Edition:** G29 | 2020-2026 - **Toyota GR Supra Base and Premium:** A90 | 2020-2026 - **Toyota GR Supra Launch Edition:** A90 | 2020 - **Toyota GR Supra A91 Edition:** A90 | 2021-2022 - **Toyota GR Supra A91-MT Edition:** A90 | 2023 - **Toyota GR Supra 45th Anniversary Edition:** A90 | 2024 - **Toyota GR Supra MkV Final Edition:** A90 | 2026 ### Notes - **For cars with factory electronic damping that are being fitted with non-electronic dampers** - **BILSTEIN requires this kit on cars with electronic suspension fitted with the [EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra](https://bulletproofautomotive.com/product/bilstein-evo-t1-coilovers-for-g29-bmw-z4-and-a90-toyota-gr-supra-48-304498/)** - **Sold individually: one kit per car, covering front and rear** ### Frequently Asked Questions - **Do I need the BILSTEIN B1 Active to Passive Conversion Kit?** You need the B1 Active to Passive Conversion Kit if your G29 Z4 or A90 GR Supra has factory electronic damping and you are fitting non-electronic dampers, such as BILSTEIN EVO T1 coilovers. Without it, removing the factory electronic dampers triggers warning indicators. Cars built without electronic damping do not need it. - **Is any wiring needed to install the kit?** BILSTEIN describes the kit as plug and play with the factory wiring harness, and it supplies all required components and instructions in the box. The kit goes in while the dampers are being changed, so it is simplest to have it fitted during the coilover installation itself. - **Does one kit cover front and rear?** Yes. BILSTEIN lists the kit for the front and rear with a quantity of one per vehicle, so a single kit handles the conversion for the whole car. It is specific to the shared G29 Z4 and A90 GR Supra platform and is not meant for other BMW or Toyota models. - **Which model years does BILSTEIN list?** BILSTEIN lists the BMW Z4 sDrive30i from 2019 and the M40i from 2020, both through 2026, and the Toyota GR Supra from 2020 through 2026, including the Launch Edition, A91 Edition, A91-MT Edition, 45th Anniversary Edition and MkV Final Edition. - **What warranty covers the conversion kit?** BILSTEIN covers its B1 component parts, including this conversion kit, with its Limited 90-Day Warranty. The kit is made in Germany, and Bulletproof Automotive handles any warranty claim with BILSTEIN for the owner, so support comes from the place the kit was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar [11-239680]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b1-sway-bar-adapter-kit-for-991-porsche-911-pdcc-11-239680/" lang: "en-US" type: "product" description: "BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar   Lets BILSTEIN height adjustable coilovers go onto a 991 911 with PDCC while the factory active sway bar system keeps working. Sold individually: one" last_modified: "2026-11-13T22:09:19+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>445.00</bdi></span></del> <span class="screen-reader-text">Original price was: $445.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $299.00.</span>" sku: "11-239680" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860741017" brand: "Bilstein" part_number: "11-239680" map: "299.0" cost: "245.44" --- # BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar [11-239680] # BILSTEIN B1 Sway Bar Adapter Kit for 991 Porsche 911 with Active Front Stabilizer Bar BILSTEIN’s B1 Sway Bar Adapter Kit lets a BILSTEIN ride height adjustable coilover kit go onto a 991 Porsche 911 with an active front stabilizer bar, the system Porsche fits as part of PDCC, while the factory active sway bar system keeps its full function. BILSTEIN engineers these adapter kits to work with its own coilovers on cars with active sway bars, and it supplies every required component and the instructions in the box. ### Design and Performance - Fitting the kit has one trade-off that BILSTEIN states plainly: it limits the lowering range of the coilovers to their minimum specification. A 991 with PDCC keeps its roll control and gains BILSTEIN damping and height adjustment, but not the lowest settings the same coilovers reach on a car without active stabilizer bars. ### Features - Adapter kit for fitting a BILSTEIN ride height adjustable coilover kit to a 991 911 with an active front stabilizer bar - Keeps the full function of the factory active sway bar system once the coilovers are installed - All required components and installation instructions included, in a galvanized finish - The B1 Sway Bar Adapter Kit is made in Germany and covered by the BILSTEIN Limited 90-Day Warranty ### Specifications - **Use:** BILSTEIN coilover kits on cars with an active front stabilizer bar - **Effect on lowering:** Limits the lowering range to the minimum specification - **Finish:** Galvanized - **Quantity per vehicle:** 1 - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **Porsche 911 Carrera, Carrera S, Carrera 4 and Carrera 4S:** 991 | 2013-2017 - **Porsche 911 Targa 4, Targa 4S, Turbo and Turbo S:** 991 | 2014-2017 - **Porsche 911 GT3:** 991 | 2014-2016 - **Porsche 911 Carrera GTS and Carrera 4 GTS:** 991 | 2015-2016 - **Porsche 911 50th Anniversary Edition:** 991 | 2014 - **Porsche 911 Carrera Black Edition, Carrera 4 Black Edition and Targa 4 GTS:** 991 | 2016 ### Notes - **BILSTEIN lists this kit for 991 cars with an active front stabilizer bar, part of PDCC _(Porsche Dynamic Chassis Control)_** - **BILSTEIN states that the kit limits the coilover lowering range to its minimum specification** - **BILSTEIN requires this kit on PDCC cars fitted with the [B16 DampTronic Coilovers for 991](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-991-porsche-911-with-pasm-49-216042/)** - **Sold individually: one kit per car** ### Frequently Asked Questions - **Does my 991 need the BILSTEIN B1 Sway Bar Adapter Kit?** BILSTEIN lists the B1 Sway Bar Adapter Kit for 991 cars with an active front stabilizer bar, the system Porsche fits with PDCC. If the car has PDCC and is getting a BILSTEIN ride height adjustable coilover kit, BILSTEIN calls for this kit so the active sway bar system keeps working. - **Will the adapter kit change how low the car can go?** Yes. BILSTEIN states that the kit limits the lowering range of the coilovers to their minimum specification. A PDCC car fitted with BILSTEIN coilovers and this kit will not reach the lowest settings the same coilovers give a car without active stabilizer bars, so plan the target ride height with that in mind. - **Does PDCC still work after the coilovers are installed?** BILSTEIN designs the B1 Sway Bar Adapter Kit so the factory active sway bar system keeps its full function with a BILSTEIN ride height adjustable coilover kit installed. The car keeps the roll control that PDCC provides, while the BILSTEIN coilovers set the ride height and damping at each corner. - **What comes in the kit?** BILSTEIN supplies all required components and the installation instructions in the kit, with a galvanized finish for corrosion protection. One kit covers one car, and BILSTEIN publishes the instructions for this part so an installer can review the job in advance. - **What warranty covers the sway bar adapter kit?** BILSTEIN covers its B1 component parts, including this adapter kit, with its Limited 90-Day Warranty. The kit is made in Germany, and Bulletproof Automotive handles any warranty claim with BILSTEIN for the owner, so support comes from the place the kit was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "AL13 Lux Series LUX06 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux06-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX06 Three-Piece sets the Lux Series’ open multi-spoke face, with slim, evenly spaced spokes, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed titanium hardware. Each" last_modified: "2026-11-13T21:46:02+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX06 Three-Piece Wheel # AL13 Lux Series LUX06 Three-Piece Wheel The AL13 LUX06 Three-Piece puts the open multi-spoke design of the LUX06 on AL13’s modular three-piece construction. A separate outer lip frames the spokes, and the three-piece build allows a much wider range of fitments. Lux Series wheels carry their designs all the way to the outer edge, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX06 pairs heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX06 - The LUX06 Three-Piece uses thin, straight spokes spaced evenly around a compact hub, each with a fine center ridge running toward the lip. There’s wide spacing between the spokes, which makes this the most open face in the Lux Series multi-spoke lineup and leaves the brakes in full view. Each spoke flares slightly where it meets the lip, giving the outer edge a crisp, finished look. The separate lip adds a defined border around the spoke pattern. As the width increases and the offset drops, it becomes a deeper, stepped lip, the classic profile of multi-spoke wheels on grand tourers and lowered luxury cars. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX06 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX06 Three-Piece can be built with hidden or exposed hardware. Hidden hardware, as shown, keeps the lip smooth, so the slim spokes run straight into a clean, uninterrupted edge. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more motorsport-inspired look. Titanium is lighter than steel, so it also saves a little unsprung weight. It’s offered in PVD Black, Raw Titanium, or Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX06 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX06 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX06 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX06 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux06-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **How is the LUX06 Three-Piece different from the LUX06 Monoblock?** Both share the same open, slim multi-spoke face. The AL13 LUX06 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX06 Monoblock is forged as one piece, runs its spokes right to the rim, and is the lighter of the two. - **How does the lip change the look of the LUX06 Three-Piece?** On the monoblock, the spokes run straight into the rim. On the AL13 LUX06 Three-Piece, they end at a separate lip that frames the whole spoke pattern. With a narrow, higher-offset spec, the lip stays a thin band. Wider widths and lower offsets push the spokes deeper into the barrel for a stepped, deep-dish profile that suits the open design. - **Can the spokes and lip be finished differently?** Yes. The center and outer lip of the LUX06 Three-Piece are separate components, so each one can take its own finish. A lip that contrasts with the spokes outlines the open pattern and draws the eye outward, while a fully matched finish keeps the AL13 LUX06 Three-Piece understated and lets the spoke shapes do the work. - **Should I choose hidden or exposed hardware?** Hidden hardware keeps the LUX06 Three-Piece clean, with the slim spokes running into a smooth, uninterrupted lip. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more motorsport-inspired look, with a small weight saving over steel. With such an open face, exposed hardware stands out clearly. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX06 Three-Piece available in?** The AL13 LUX06 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX06 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux06-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX06 Monoblock brings an open multi-spoke design to the Lux Series. Its slim, evenly spaced spokes run from a compact hub out to the rim for a clean, classic look. Each LUX06 Monoblock is forged in one piece" last_modified: "2026-11-13T21:46:46+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX06 Monoblock Wheel # AL13 Lux Series LUX06 Monoblock Wheel The AL13 LUX06 Monoblock is the most open design in AL13’s Lux Series so far. Slim, evenly spaced spokes run from the hub to the outer edge of the rim. The Lux Series is built on elegant multi-spoke layouts that reach all the way out, so each wheel looks larger and more refined than a typical design of the same diameter. The LUX06 combines heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX06 - The spokes on the LUX06 Monoblock are thin and straight. Each one has a fine center ridge and leaves a compact hub at an even interval. The LUX02 packs its spokes tightly and the LUX03 fills its face with dozens, but the LUX06 leaves wide gaps between spokes, so the face reads as light and airy. Near the rim, each spoke flares slightly where it meets the barrel, giving the outer edge a crisp, defined finish. This kind of slim multi-spoke layout has long been used on classic grand tourers and luxury sedans. On a modern car, the LUX06 Monoblock looks clean and timeless and shows off big brakes behind it. ### Lightweight Performance. Engineered Strength. - Each LUX06 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. A one-piece forging gives the slim spokes the strength and stiffness that a cast wheel of the same design couldn’t reach, and it weighs less too. Less unsprung and rotating mass helps the suspension respond quickly and keeps the car settled on rough pavement. The LUX06 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX06 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX06 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the spokes begin, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX06 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX06 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux06-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **How is the LUX06 Monoblock different from the LUX02 and LUX03?** All three are multi-spoke Lux Series designs that reach the rim. The LUX02 groups its spokes tightly around the hub, and the LUX03 fills the face with dozens of blade-tipped spokes. The AL13 LUX06 Monoblock uses fewer, thinner spokes at even spacing, which gives it the most open face of the three. - **Are the slim spokes on the LUX06 Monoblock strong enough for heavier vehicles?** Yes. The LUX06 Monoblock is forged from a single piece of aluminum, so its slim spokes are much stronger than a cast spoke of the same size. Each wheel is engineered around your vehicle’s weight, bolt pattern, and brake package, which makes the AL13 LUX06 Monoblock suitable for large sedans and SUVs as well as lighter performance cars. - **Will my brakes be visible behind the LUX06 Monoblock?** Very much so. The wide gaps between the slim spokes make the LUX06 Monoblock one of the most open designs in the Lux Series, so calipers and rotors are easy to see. That makes it a good match for cars with large or colored brake calipers. Caliper clearance is checked for your vehicle when the offset and spec are finalized. - **Which cars suit the LUX06 Monoblock best?** The clean, open spoke pattern of the AL13 LUX06 Monoblock fits grand tourers, luxury sedans, and SUVs that call for a classic, formal look. It also works on modern sports cars, where the thin spokes keep a large diameter looking light. At 22″ and above, the even spacing keeps the design from looking busy on big wheel wells. - **What sizes is the LUX06 Monoblock available in?** The AL13 LUX06 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX05 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux05-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX05 Three-Piece sets the Lux Series solid star-shaped 5-spoke face inside the outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed titanium hardware. Each LUX05 Three-Piece is built to" last_modified: "2026-11-13T21:15:59+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX05 Three-Piece Wheel # AL13 Lux Series LUX05 Three-Piece Wheel The AL13 LUX05 Three-Piece puts the solid star-shaped face of the LUX05 on AL13’s modular three-piece construction. A separate outer lip frames the five points, and the build opens up a much wider fitment range. Lux Series wheels carry their designs all the way to the outer edge, so they look larger and more substantial than a typical design of the same diameter. The LUX05 combines heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX05 - The LUX05 Three-Piece is built around one large, smooth surface. Five broad points reach out to the inner edge of the lip, with an opening set between each pair near the rim. The design calls back to the solid-face wheels of classic 1980s luxury coupes, and the three-piece build adds a stepped lip that grows deeper as the width increases and the offset drops. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX05 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX05 Three-Piece can be built with hidden or exposed hardware. Hidden hardware, as shown, leaves the lip smooth and keeps attention on the clean, solid face. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip, which contrasts nicely with the plain star surface. Titanium is lighter than steel, so it also trims a little unsprung weight. Titanium finishes are PVD Black, Raw Titanium, and Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX05 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX05 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the middle of the solid star face, where it becomes the focal point of the wheel. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the five points. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX05 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX05 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux05-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **How is the LUX05 Three-Piece different from the LUX05 Monoblock?** Both have the same solid star-shaped 5-spoke face. The AL13 LUX05 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX05 Monoblock is forged as one piece, runs its points right to the rim, and is the lighter of the two. - **Can the face and lip be finished in different colors?** Yes. The face and outer lip of the LUX05 Three-Piece are separate components, so each can be finished on its own. A brushed or polished lip around a painted star, in Precision Black or a color matched to the body, is a strong combination for this design. A fully matched finish gives the LUX05 Three-Piece a quieter, one-tone look. - **Should I choose hidden or exposed hardware?** Hidden hardware keeps the LUX05 Three-Piece true to its simple design, with a smooth lip and nothing pulling attention from the solid face. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip that contrasts with the clean star surface, with a small weight saving over steel. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX05 Three-Piece available in?** The AL13 LUX05 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX05 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux05-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX05 Monoblock brings a bold 5-spoke design to the Lux Series. Its solid star-shaped face reaches all the way to the rim, with five openings near the edge. Each LUX05 Monoblock is forged in one piece and built" last_modified: "2026-11-13T21:16:47+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX05 Monoblock Wheel # AL13 Lux Series LUX05 Monoblock Wheel The AL13 LUX05 Monoblock brings AL13’s Lux Series back to basics with a 5-spoke design. Instead of five separate spokes, it uses one solid face shaped like a star. Like every Lux Series wheel, the design reaches all the way to the rim, so the wheel looks larger and more substantial than a conventional 5-spoke of the same diameter. The LUX05 pairs heritage styling with modern machining, works on almost any car, and has become one of AL13’s top-selling wheels worldwide. ### LUX05 - Most of the LUX05 Monoblock face is a single smooth surface, with five wide points that extend out to the lip. Between the points, five openings sit near the outer edge. The space between the hub and the rim is filled in completely. That leaves a broad, uninterrupted area for finishing, and the brushed face shown here has fine radial machining lines running from the center out to the tips of the star. The look recalls the solid disc wheels of 1980s luxury coupes, rebuilt with sharper edges and crisper machining. On a large sedan or SUV, the LUX05 Monoblock looks bold and clean, and its five openings keep it clearly a 5-spoke rather than a covered disc. ### Lightweight Performance. Engineered Strength. - Each LUX05 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. A one-piece build gives a stiff, durable wheel that weighs less than a cast wheel of similar size. Less unsprung and rotating mass lets the suspension respond faster and keeps the car settled on rough pavement. The LUX05 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX05 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX05 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the middle of the solid star face, where it becomes the focal point of the wheel. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the five points. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX05 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX05 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux05-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **Is the LUX05 Monoblock a full-face wheel or a 5-spoke?** It’s both. The AL13 LUX05 Monoblock has five clear spokes that reach the rim, but the space between them is filled in all the way out to the edge, so the face reads as one solid star shape. Five openings near the rim keep it from looking like a covered disc and give a glimpse of the brakes behind it. - **How is the LUX05 Monoblock different from the LUX01 Monoblock?** Both use a large, solid face, but they’re shaped differently. The LUX01 has a round full-face disc ringed by many short spokes at the edge. The AL13 LUX05 Monoblock shapes its solid face into five broad points with only five openings, so the design is bolder and simpler and reads clearly as a 5-spoke from a distance. - **Which finish shows off the LUX05 Monoblock best?** A brushed face, like the one shown, suits the LUX05 Monoblock well because the large solid surface shows long, even machining lines from the center to each point. Polished finishes give a mirror look on luxury cars. Solid colors like Precision Black or Grand Prix White turn the star into a bold graphic shape, especially against a contrasting body color. - **Will my brakes be visible behind the LUX05 Monoblock?** Only through the five openings near the rim. The solid face of the LUX05 Monoblock covers most of the brake assembly, so it suits cars where you’d rather the wheel take the spotlight than the calipers. Caliper clearance is still checked for your vehicle when the offset and spec are finalized. - **What sizes is the LUX05 Monoblock available in?** The AL13 LUX05 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "AL13 Lux Series LUX04 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux04-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX04 Three-Piece sets the Lux Series directional fan design, broad angled blades sweeping from a compact hub, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments, with hidden or exposed" last_modified: "2026-11-13T20:54:03+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Wheel Direction: "Left Side" Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX04 Three-Piece Wheel # AL13 Lux Series LUX04 Three-Piece Wheel The AL13 LUX04 Three-Piece takes the directional fan design of the LUX04 and builds it on AL13’s modular three-piece construction. A separate outer lip frames the blades and gives you far more control over fitment. Lux Series wheels run their designs all the way to the outer edge, which makes each wheel look larger and more refined than a typical design of the same diameter. The LUX04 combines heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX04 - On the LUX04 Three-Piece, broad, flat blades sweep out from a compact hub. Each one widens as it reaches the lip, and all of them angle the same way, so the face looks like a turbine even at a standstill. The lip around the blade tips adds contrast and makes the fan shape stand out more than on the one-piece version. The slots between the blades are narrow, so the face looks nearly solid from a distance and shows its detail up close. The LUX04 is directional and is built as mirrored left- and right-side wheels, so the blades sweep the same way relative to forward travel on both sides of the car. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX04 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX04 Three-Piece can be assembled with hidden or exposed hardware. With hidden hardware, as shown, the lip stays smooth and the blades run straight into a clean band of metal. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more technical look. Titanium is lighter than steel, so it also trims a little unsprung weight. Titanium finishes are PVD Black, Raw Titanium, or Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX04 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX04 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the blades begin their sweep, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the blades. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Directional spokes - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX04 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX04 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux04-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **Do I need left and right wheels for the LUX04 Three-Piece?** Yes. The LUX04 Three-Piece is a directional design, so the blades on each side of the car need to sweep the same way relative to forward travel. AL13 builds mirrored left- and right-side wheels, and you choose the direction for each wheel when ordering. Directional wheels can’t be swapped from side to side during tire rotations. - **How is the LUX04 Three-Piece different from the LUX04 Monoblock?** Both share the same directional fan face. The AL13 LUX04 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX04 Monoblock is forged as one piece, runs its blades right to the rim, and is the lighter of the two. - **How does lip depth change the look of the LUX04 Three-Piece?** On a narrower, higher-offset spec, the blades of the LUX04 Three-Piece reach close to the edge with only a thin band of the lip. Wider widths and lower offsets push the fan deeper into the barrel behind a stepped lip, which adds shadow around the blade tips and makes the wheel look more aggressive. We’ll go over the expected lip depth for your spec before production. - **Should I choose hidden or exposed hardware?** Hidden hardware keeps the LUX04 Three-Piece clean, so the sweeping blades end at a smooth, uninterrupted lip and the fan shape stays the focus. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for a more technical, motorsport look, with a small weight saving over steel. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX04 Three-Piece available in?** The AL13 LUX04 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-R]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-red-plain-11in-rear-brake-kit-for-honda-civic-140-10206-r/" lang: "en-US" type: "product" description: "Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Red parking brake calipers on 11.00in plain face vented rotors with aluminum hats, the rear brake to balance a Wilwood front kit on" last_modified: "2026-11-13T22:32:29+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,148.87</bdi></span></del> <span class="screen-reader-text">Original price was: $1,148.87.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,025.78</bdi></span></ins><span class="screen-reader-text">Current price is: $1,025.78.</span>" sku: "140-10206-R" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "889545008814" brand: "Wilwood" part_number: "140-10206-R" map: "1025.78" cost: "847.24" --- # Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-R] # Wilwood Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Red Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol pairs red Combination Parking Brake calipers with 11.00in Ultralite HP plain face rotors. Wilwood builds its parking brake rear kits to balance its front big brake kits, and the handbrake keeps working through the calipers. ### Features - Red powder coat Combination Parking Brake calipers - 11.00in plain face rotors with 30 cooling vanes - Aluminum hats in black E-coat - 4.0 sq in BP-10 pads - 11in Rear Brake Kit for Honda Civic built to balance front kits ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, red powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 11.00in x 0.81in _(279.4mm x 20.6mm)_ - **Rotor:** Ultralite HP, 30 vanes, iron, plain face - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 15in ### What’s Included - Wilwood Combination Parking Brake red calipers _(L/R)_ - 11.00in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **One kit covers the left and right rear corners** - **For cars with factory rear disc brakes and a 2.39in axle offset** - **Lines are not included; Wilwood specifies rear Flexline kit 220-10840** - **Parking brake cable kit 330-10966 is listed by Wilwood; contact us to add it** - **Installation includes trimming a casting ear on each rear spindle, shown in the assembly schematic** - **Needs 15in or larger wheels; check the wheel clearance diagram in the gallery** - **For the same red calipers with drilled rotors, see the [red drilled and slotted 11in kit](https://bulletproofautomotive.com/product/wilwood-red-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-dr/)** - **For 14in wheels, see the [Wilwood HM7 red rear kit](https://bulletproofautomotive.com/product/wilwood-red-plain-hm7-rear-brake-kit-for-honda-civic-140-18343-r/)** ### Frequently Asked Questions - **Why choose the plain face red 11in Rear Brake Kit for Honda Civic over the drilled version?** The plain face red 11in Rear Brake Kit for Honda Civic uses Ultralite HP vented rotors and costs less than the drilled version. The drilled and slotted kit shares the calipers, pads and rotor size, and is chosen mostly for its looks. - **Which Civic and CRX models are covered?** For the Civic, Wilwood covers the 1992-1995 Si hatchback, the 1994-1995 EX coupe and 1992-1995 EX sedan with rear disc and the 1999-2000 Si coupe. The del Sol with rear disc from 1993 to 1997 and the 1990-1991 CRX Si are listed too. - **What else do I need to install it?** Wilwood specifies rear Flexline kit 220-10840 and lists parking brake cable kit 330-10966, both sold separately. Fresh high temperature brake fluid is needed for the bleed. Bulletproof Automotive can add the lines and the cables to the same order for you. - **Does it work with my factory brakes up front?** It bolts to the factory rear hubs either way, but Wilwood designs its parking brake rear kits to balance its front big brake kits. On these Hondas it pairs with the Wilwood DPHA front kit or the Dynapro road race front kit. - **Is red the only color option?** No. Red and black are the standard finishes, and Wilwood can supply other caliper colors at extra cost. Let Bulletproof Automotive know the color and we will check with Wilwood whether it is available, and at what price and lead time. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-DR]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-red-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-dr/" lang: "en-US" type: "product" description: "Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Gloss red parking brake calipers over 11.00in SRP drilled and slotted rotors on aluminum hats, for Civics, Integras and del Sols." last_modified: "2026-11-16T08:15:51+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,308.26</bdi></span></del> <span class="screen-reader-text">Original price was: $1,308.26.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,168.09</bdi></span></ins><span class="screen-reader-text">Current price is: $1,168.09.</span>" sku: "140-10206-DR" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "889545008807" brand: "Wilwood" part_number: "140-10206-DR" map: "1168.09" cost: "962.51" --- # Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-DR] # Wilwood Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Red Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol completes a red Wilwood front upgrade. Gloss red Combination Parking Brake calipers sit over 11.00in SRP drilled and slotted rotors on aluminum hats, and the handbrake works through the calipers. ### Features - Red powder coat Combination Parking Brake calipers - SRP drilled and slotted rotors in black E-coat - Parking brake lock built into each caliper - D340 pads in BP-10 street compound - 11in Rear Brake Kit for Honda Civic that matches red front calipers ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, red powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 11.00in x 0.81in _(279.4mm x 20.6mm)_ - **Rotor:** SRP drilled and slotted, iron, black E-coat - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 15in ### What’s Included - Wilwood Combination Parking Brake red calipers _(L/R)_ - 11.00in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Covers both rear corners in one kit** - **Requires factory rear disc brakes and a 2.39in axle offset** - **Brake lines are not part of the kit; Wilwood specifies rear Flexline kit 220-10840** - **Wilwood lists parking brake cable kit 330-10966; contact us to add it to your order** - **The rear spindle needs a casting ear trimmed during installation; see the assembly schematic** - **15in is the smallest wheel Wilwood lists; check the wheel clearance diagram in the gallery** - **Want plain rotors with the red calipers? See the [red plain face 11in kit](https://bulletproofautomotive.com/product/wilwood-red-plain-11in-rear-brake-kit-for-honda-civic-140-10206-r/)** - **For 14in wheels, see the [Wilwood HM7 red drilled rear kit](https://bulletproofautomotive.com/product/wilwood-red-drilled-hm7-rear-brake-kit-for-honda-civic-140-18343-dr/)** ### Frequently Asked Questions - **Does the red 11in Rear Brake Kit for Honda Civic fit an Integra?** Yes. Wilwood lists this red 11in Rear Brake Kit for Honda Civic for every 1990-1996 Acura Integra and the 1997-2001 Integra except the Type R, along with the rear disc Civic Si, EX and del Sol models and the 1990-1991 CRX Si. - **Do I need a separate line kit?** Yes. Lines are not included. Wilwood specifies rear Flexline kit 220-10840 for these calipers, and Bulletproof Automotive can add it to the same order. Fresh high temperature brake fluid is also needed for the full bleed after the calipers go on. - **How does the parking brake work?** Each caliper has a mechanical lock built into the body. The handbrake cable connects to the caliper lever, so pulling the lever clamps the rear pads. Wilwood lists parking brake cable kit 330-10966 to connect these calipers to the car. - **Which pads come with the kit?** The kit ships with Wilwood BP-10 pads in the D340 shape, with 4.0 square inches of area and 1.5 cubic inches of volume per pad. BP-10 is the Wilwood street compound, a good match for a street driven Civic or Integra. - **Can I get the calipers in a custom finish?** Yes. Wilwood offers caliper colors beyond the standard red and black at extra cost. Send Bulletproof Automotive the finish you would like and we will check its price and lead time with Wilwood and quote it before anything is ordered. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-black-plain-11in-rear-brake-kit-for-honda-civic-140-10206/" lang: "en-US" type: "product" description: "Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black Combination Parking Brake calipers on 11.00in vented rotors with aluminum hats, a rear disc upgrade for Civics, Integras and del Sols." last_modified: "2026-11-13T22:32:08+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,148.87</bdi></span></del> <span class="screen-reader-text">Original price was: $1,148.87.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,025.78</bdi></span></ins><span class="screen-reader-text">Current price is: $1,025.78.</span>" sku: "140-10206" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "889545008784" brand: "Wilwood" part_number: "140-10206" map: "1025.78" cost: "847.24" --- # Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206] # Wilwood Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Black Plain Face 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol replaces the factory rear disc brake with Combination Parking Brake calipers on 11.00in vented rotors and aluminum hats. Each caliper stops the car with hydraulic pressure and holds it with an internal mechanical lock, so the parking brake works through the new calipers. ### Features - Black powder coat Combination Parking Brake calipers - 11.00in Ultralite HP vented rotors with 30 vanes - Two-piece rotors on aluminum hats in black E-coat - D340 BP-10 pads with 4.0 sq in of area - 11in Rear Brake Kit for Honda Civic built to match Wilwood front kits ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, black powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 11.00in x 0.81in _(279.4mm x 20.6mm)_ - **Rotor:** Ultralite HP, 30 vanes, iron, plain face - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 15in ### What’s Included - Wilwood Combination Parking Brake black calipers _(L/R)_ - 11.00in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Covers both rear corners** - **For cars originally built with rear disc brakes and a 2.39in axle offset** - **Brake lines are not included; Wilwood specifies rear Flexline kit 220-10840** - **Wilwood lists parking brake cable kit 330-10966 for this kit; contact us to add it** - **Installation includes trimming a casting ear on the rear spindle, shown in the assembly schematic** - **Fits 15in wheels in many cases; check the wheel clearance diagram in the gallery** - **For the same black calipers with drilled rotors, see the [black drilled and slotted 11in kit](https://bulletproofautomotive.com/product/wilwood-black-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-d/)** - **For 14in wheels, see the smaller [Wilwood HM7 rear kit](https://bulletproofautomotive.com/product/wilwood-black-plain-hm7-rear-brake-kit-for-honda-civic-140-18343/)** ### Frequently Asked Questions - **What does the Wilwood 11in Rear Brake Kit for Honda Civic replace?** This 11in Rear Brake Kit for Honda Civic replaces the factory rear calipers and rotors on cars that came with rear disc brakes. Wilwood Combination Parking Brake calipers bolt on with new brackets, and two-piece 11.00 inch rotors mount to the factory hubs. - **Which cars does Wilwood list?** All of them are cars that left the factory with rear disc brakes: the Acura Integra from 1990 to 2001 except the Type R, the Civic Si hatchback, coupe and EX with rear disc from the 1990s, the rear disc del Sol and the 1990-1991 CRX Si. - **Are brake lines and parking brake cables included?** No. Wilwood specifies rear Flexline kit 220-10840 and lists parking brake cable kit 330-10966 for these calipers. Both are sold separately, and Bulletproof Automotive can add both of them to your order so the whole kit goes on in one job. - **How is this kit different from the HM7 rear kit?** The HM7 kit uses a small single piston caliper on a 9.39 inch one-piece rotor and fits 14 inch wheels. This kit runs larger calipers with 4.0 square inch pads on 11.00 inch two-piece rotors, and needs 15 inch wheels. - **Can the calipers be ordered in another finish?** Yes. Black and red are the standard finishes, and Wilwood offers other caliper colors at extra cost. Ask Bulletproof Automotive about the color you have in mind and we will get a price and lead time from Wilwood for you first. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-D]" url: "https://bulletproof2026.magepitstop.com/product/wilwood-black-drilled-11in-rear-brake-kit-for-honda-civic-140-10206-d/" lang: "en-US" type: "product" description: "Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Black parking brake calipers over 11.00in SRP drilled and slotted rotors on aluminum hats, a rear upgrade for Civics, Integras and del" last_modified: "2026-11-14T02:50:45+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,308.26</bdi></span></del> <span class="screen-reader-text">Original price was: $1,308.26.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,168.09</bdi></span></ins><span class="screen-reader-text">Current price is: $1,168.09.</span>" sku: "140-10206-D" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "889545008791" brand: "Wilwood" part_number: "140-10206-D" map: "1168.09" cost: "962.36" --- # Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol [140-10206-D] # Wilwood Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol Wilwood’s Black Drilled and Slotted 11in Rear Brake Kit for Honda Civic, Acura Integra and Civic del Sol puts black Combination Parking Brake calipers over 11.00in SRP drilled and slotted rotors. It matches a Wilwood front kit with drilled rotors and keeps a working handbrake through a mechanical lock inside each caliper. ### Features - SRP drilled and slotted 11.00in rotors in black E-coat - Black powder coat Combination Parking Brake calipers - Aluminum short-offset hats, 4 x 100mm - Single 1.34in piston per caliper - 11in Rear Brake Kit for Honda Civic with BP-10 pads ### Specifications - **Caliper:** Wilwood Combination Parking Brake, radial mount, black powder coat - **Piston:** One 1.34in steel piston per caliper, 1.41 sq in - **Pad shape, area and volume:** D340, 4.0 sq in, 1.5 cu in - **Pad compound:** BP-10 - **Rotor size:** 11.00in x 0.81in _(279.4mm x 20.6mm)_ - **Rotor:** SRP drilled and slotted, iron, black E-coat - **Rotor hat:** Aluminum short-offset hat, 0.750in offset, black E-coat, 4 x 100mm - **Axle offset:** 2.39in - **Minimum wheel diameter:** 15in ### What’s Included - Wilwood Combination Parking Brake black calipers _(L/R)_ - 11.00in vented rotors _(L/R)_ - Aluminum rotor hats _(x2)_ - Caliper mounting brackets - BP-10 rear brake pad set - Installation hardware ### Applications - **Acura Integra:** 1990-1996 | all trims - **Acura Integra:** 1997-2001 | all trims except Type R - **Honda Civic Coupe:** EX with rear disc 1994-1995 | Si 1999-2000 - **Honda Civic Hatchback:** Si 1992-1995 - **Honda Civic Sedan:** EX with rear disc 1992-1995 - **Honda Civic del Sol:** with rear disc 1993 | VTEC 1994-1997 | S and Si 1995-1997 - **Honda CRX:** Si 1990-1991 ### Notes - **Sold as a complete kit for both rear wheels** - **Built for cars that came with rear disc brakes and a 2.39in axle offset** - **Lines are sold separately; Wilwood specifies rear Flexline kit 220-10840** - **Parking brake cable kit 330-10966 is listed by Wilwood for these calipers; contact us to add it** - **A casting ear on the rear spindle is trimmed during installation; see the assembly schematic** - **Rated for 15in wheels; check the wheel clearance diagram in the gallery against your wheel** - **The [black plain face 11in kit](https://bulletproofautomotive.com/product/wilwood-black-plain-11in-rear-brake-kit-for-honda-civic-140-10206/) uses the same calipers with plain rotors** - **For 14in wheels, see the [Wilwood HM7 black drilled rear kit](https://bulletproofautomotive.com/product/wilwood-black-drilled-hm7-rear-brake-kit-for-honda-civic-140-18343-d/)** ### Frequently Asked Questions - **Why choose the drilled and slotted 11in Rear Brake Kit for Honda Civic?** The drilled and slotted 11in Rear Brake Kit for Honda Civic is mainly about appearance, matching a front kit that runs drilled rotors. Calipers, pads and rotor size are the same as the plain face kit, and the black E-coat keeps the rotors looking clean. - **Does the parking brake still work?** Yes. Each Combination Parking Brake caliper has an internal mechanical lock that the handbrake lever operates through a cable. Wilwood lists parking brake cable kit 330-10966 for these calipers, while hydraulic pressure from the master cylinder handles normal braking as usual. - **What years and models are covered?** Wilwood covers every 1990-2001 Integra other than the Type R, the 1992-1995 Civic Si hatchback, the rear disc Civic EX coupe and sedan, the 1999-2000 Civic Si coupe, the del Sol with rear disc from 1993 to 1997 and the 1990-1991 CRX Si. - **What does installation involve?** The factory calipers and rotors come off, a casting ear on each rear spindle is trimmed, and the Wilwood brackets bolt on with thread locker. The hats and rotors mount to the factory hubs, then new lines go on and the system is bled. - **Will 15 inch wheels clear?** Wilwood sets 15 inches as the minimum wheel for this kit. Spoke shape and barrel profile still matter, so check the wheel clearance diagram in the gallery against your own wheel, or send Bulletproof Automotive the wheel details before you order. # About Wilwood Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008. --- --- title: "AL13 Lux Series LUX04 Monoblock Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux04-monoblock-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX04 Monoblock brings a directional fan design to the Lux Series, with broad, angled blades that sweep from a compact hub out to the rim. Each LUX04 Monoblock is forged in one piece, built in mirrored left and" last_modified: "2026-11-13T20:06:22+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,400.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,950.00</bdi></span><span class="screen-reader-text">Price range: $2,400.00 through $2,950.00</span>" sku: "" in_stock: true attributes: Wheel Direction: "Left Side" Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Monoblock Wheel" --- # AL13 Lux Series LUX04 Monoblock Wheel # AL13 Lux Series LUX04 Monoblock Wheel The AL13 LUX04 Monoblock gives AL13’s Lux Series a fan design, with broad, angled blades that sweep from the hub to the edge of the rim. Like every Lux Series wheel, its design runs right out to the rim, so the wheel looks larger and more refined than a typical design of the same diameter. The LUX04 pairs heritage styling with modern machining, looks right on almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX04 - The LUX04 Monoblock uses a ring of wide, flat blades instead of round spokes. Each blade starts narrow at the hub and grows wider toward the rim, and all of them are angled the same way, so the face looks like a turbine even when the car is parked. The blades are set close together with narrow slots between them, so the face reads as almost solid from a distance, with the brakes only partly visible. Each blade has a crisp machined edge that shows up well in brushed and polished finishes. The LUX04 is a directional design, so it’s built as left- and right-side wheels with the blades sweeping the same way relative to forward travel on both sides of the car. ### Lightweight Performance. Engineered Strength. - Each LUX04 Monoblock is forged and CNC machined from a single piece of aluminum, with no assembly hardware or separate sections. A one-piece build is stiff and durable and weighs less than a cast wheel of similar size. Less unsprung and rotating mass helps the suspension respond quickly and keeps the car settled over rough pavement. Each LUX04 is built to order to your exact diameter, width, offset, and finish. ### Center-Cap Options - Every AL13 center cap style is available on the LUX04 Monoblock, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX04 Monoblock to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where the blades begin their sweep, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the blades. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a brushed, high luster polish, or stone base. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Directional spokes - Monoblock configuration - Aero-space grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Center-lock option - Boundless component finishing options - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX04 - **Wheel Configuration:** 1-piece monoblock - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX04 Configurations** - [LUX SERIES 3-piece modular](https://bulletproofautomotive.com/product/al13-lux04-three-piece-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The** [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) **will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.** ### Frequently Asked Questions - **Do I need left and right wheels for the LUX04 Monoblock?** Yes. The LUX04 Monoblock is a directional design, so the blades on each side of the car have to sweep the same way relative to forward travel. AL13 builds mirrored left- and right-side wheels, and you choose the direction for each wheel when ordering. Because of that, directional wheels can’t be swapped from side to side during tire rotations. - **What makes the LUX04 Monoblock a fan design?** Most multi-spoke wheels use narrow, straight spokes. The AL13 LUX04 Monoblock uses broad, flat blades that widen toward the rim and are all angled in the same direction, like the blades of a fan or turbine. The tight spacing between blades gives the face a nearly solid look from a distance, with a lot of detail up close. - **How is the LUX04 Monoblock different from the LUX03 Monoblock?** Both fill the face with a dense pattern that reaches the rim. The LUX03 uses dozens of slim, straight spokes with pointed tips and is non-directional. The AL13 LUX04 Monoblock uses fewer, much wider blades angled in one direction, so the design has more surface, more visual movement, and a mirrored left and right build. - **Which finishes suit the LUX04 Monoblock?** The flat, wide blades on the LUX04 Monoblock make a large canvas for brushed and polished finishes, and the machined edge on each blade catches light as the wheel turns. Darker colors like Precision Black or Torque Grey make the fan pattern quieter and almost disc-like. A machined face over a darker base color keeps both the blade shapes and the slots between them clearly visible. - **What sizes is the LUX04 Monoblock available in?** The AL13 LUX04 Monoblock is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "BILSTEIN B1 Coilover Spanner Wrench, Hook Plug [E4-XS1-Z001A00]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/" lang: "en-US" type: "product" description: "BILSTEIN B1 Coilover Spanner Wrench, Hook Plug   The hook-plug spanner wrench BILSTEIN specifies for setting ride height and preload on its B14, B16 and EVO coilovers. Sold individually: one wrench" last_modified: "2026-11-13T20:21:24+00:00" price: "<span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>19.57</bdi></span>" sku: "E4-XS1-Z001A00" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Unknown" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" units_per_sku: "1" regular_stock: "t" upc: "E4-XS1-Z001A00" brand: "Bilstein" part_number: "E4-XS1-Z001A00" map: "19.57" cost: "30.16" --- # BILSTEIN B1 Coilover Spanner Wrench, Hook Plug [E4-XS1-Z001A00] # BILSTEIN B1 Coilover Spanner Wrench, Hook Plug BILSTEIN’s B1 Coilover Spanner Wrench is the hook-plug wrench BILSTEIN specifies for adjusting the spring seats and lock rings on its threaded coilover kits, from B14 and B16 to the EVO range. Ride height and spring preload on a BILSTEIN coilover are set by turning those rings on the damper body, and this is the tool shaped to do it without marking the zinc coating. It is a small part, and it is the difference between a quick height change in the garage and a trip to a shop. ### Design and Performance - A threaded coilover is adjusted by turning a slotted spring seat and locking it with a second ring. The B1 wrench hooks into those slots, giving enough turning force to break the lock ring free and to wind the seat up or down the body. Many BILSTEIN coilover listings at Bulletproof Automotive name this wrench in their Notes, which is the easiest way to confirm it suits a given kit. ### Features - Hook-plug spanner wrench for turning the spring seat and lock ring on BILSTEIN threaded coilovers - The tool BILSTEIN specifies by part number on its B14, B16 and EVO coilover kits - Lets ride height and spring preload be set without damaging the zinc coating on the damper body - The B1 Coilover Spanner Wrench is made in Germany and covered by the BILSTEIN Limited 90-Day Warranty ### Applications - **BILSTEIN coilover kits:** B14, B16 and EVO kits whose BILSTEIN specification names spanner wrench set E4-XS1-Z001A00 ### Notes - **Sold individually: one hook-plug spanner wrench** - **BILSTEIN does not state whether a wrench is supplied with each coilover kit; check the Notes of the kit, which say when BILSTEIN specifies this wrench** ### Frequently Asked Questions - **Is the BILSTEIN B1 Coilover Spanner Wrench sold as a pair?** No. The B1 Coilover Spanner Wrench is sold individually, as one hook-plug wrench. Adjusting a spring seat against its lock ring is easiest with two wrenches, one to hold and one to turn, so many owners order two when setting ride height at home. - **Which BILSTEIN kits use this wrench?** BILSTEIN names spanner wrench set E4-XS1-Z001A00 in the specification of many of its threaded kits, including B14, B16 and EVO coilovers. Each BILSTEIN coilover listing at Bulletproof Automotive says when BILSTEIN specifies this wrench for that kit, so check the Notes of the kit in question. - **Is the B1 Coilover Spanner Wrench included with a coilover kit?** BILSTEIN does not state whether a wrench is supplied with each kit, so Bulletproof Automotive lists it separately. Buying the wrench means ride height and preload can be adjusted at any time after installation, without borrowing a tool or visiting a shop. - **Why use the BILSTEIN wrench instead of a generic one?** The hook plug on the B1 Coilover Spanner Wrench is sized for the slots in BILSTEIN spring seats and lock rings. A wrong-size wrench or a punch and hammer can slip, damage the zinc coating on the threaded body and invite corrosion, which BILSTEIN avoids with the correct tool. - **What warranty comes with the wrench?** BILSTEIN covers its B1 component parts, including this wrench, with its Limited 90-Day Warranty. The wrench is made in Germany, and Bulletproof Automotive handles any claim with BILSTEIN for the owner, so the tool is supported by the place it was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left [44-257200]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-left-44-257200/" lang: "en-US" type: "product" description: "BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left   The front left air strut for the W166 ML and GLE and the X166 GLS, built to plug into the factory air suspension." last_modified: "2026-11-13T20:19:24+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,887.00</bdi></span></del> <span class="screen-reader-text">Original price was: $1,887.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,769.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,769.00.</span>" sku: "44-257200" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860813738" brand: "Bilstein" part_number: "44-257200" map: "1769.0" cost: "1348.11" --- # BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left [44-257200] # BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Left BILSTEIN’s B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS replaces the front left air strut on vehicles built with the factory air suspension, from the 2012 ML350 to the 2019 GLS550. A sagging front corner on a large SUV upsets its stance and its ride; this BILSTEIN strut, built to original-equipment standards, puts the vehicle back on an even keel. ### Design and Performance - The strut combines the air spring and a monotube damper in one assembly, with a fork-type lower mount and the vehicle-specific upper mount, and it uses the original connectors. ### Features - Direct OE replacement for the front left air suspension strut of the W166 ML and GLE and X166 GLS - Fits the original air line and wiring connectors of the W166 ML and GLE and X166 GLS without modification - Air spring and monotube damper combined in one front left assembly, as on the original - Fork-type lower mount and vehicle-specific upper mount for the front left corner, finished in black paint - The B4 Air Suspension Strut for the front left corner is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Position:** Front Left - **Collapsed length:** 29.02in - **Extended length:** 33.69in - **Lower mount:** Fork - **Upper mount:** Vehicle-specific - **Damper design:** Monotube - **Dust boot included:** No - **Spring seat included:** No - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Mercedes-Benz GLE300d:** W166 _(4Matic)_ | 2016-2017 - **Mercedes-Benz GLE400:** W166 _(4Matic)_ | 2016-2017 and 2019 - **Mercedes-Benz GLE550:** W166 _(4Matic)_ | 2018 - **Mercedes-Benz GLE550e:** W166 _(4Matic)_ | 2016-2018 - **Mercedes-Benz GLS550:** X166 _(4Matic)_ | 2017-2019 - **Mercedes-Benz ML250:** W166 _(Bluetec 4Matic)_ | 2015 - **Mercedes-Benz ML350:** W166 _(4Matic and Bluetec 4Matic)_ | 2012-2015 - **Mercedes-Benz ML400:** W166 _(4Matic)_ | 2015 - **Mercedes-Benz ML550:** W166 | 2012-2014 ### Notes - **Sold individually: this B4 Air Suspension Strut fits the front left corner only** - **For vehicles equipped with the factory air suspension** - **The front right strut is sold separately as the [B4 Air Suspension Strut for the front right corner](https://bulletproofautomotive.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-right-44-283162/)** - **Have the ride height checked and a wheel alignment carried out after installation** ### Frequently Asked Questions - **Does the BILSTEIN B4 Air Suspension Strut fit both front corners of the GLE?** No. This B4 Air Suspension Strut is the front left strut only and is sold individually, one per box. The front right strut is a separate BILSTEIN part, and owners replacing both sides need one of each. Doing the pair together keeps the front of the vehicle level and the two sides riding alike. - **Will the front left strut connect to the AIRMATIC system?** Yes. BILSTEIN builds the B4 strut to connect directly to the original air and electrical connectors at the front left corner, so it installs without modification and the factory air suspension controller manages it exactly as it managed the original strut. - **Which vehicles does the front left strut fit?** BILSTEIN lists the W166 ML250, ML350, ML400 and ML550 from 2012 to 2015, the W166 GLE300d, GLE400, GLE550 and GLE550e from 2016 to 2019 and the X166 GLS550 from 2017 to 2019, all with air suspension. Check the exact model year against the Applications list before ordering. - **What does a failing front left air strut feel like?** The front left corner sits low after the vehicle has been parked, the air compressor runs longer than it should, a suspension message appears on the dash and the ride turns harsh or bouncy over bumps. A leaking air spring is the usual cause, and the front left strut is replaced as one assembly. - **What warranty comes with the front left strut?** BILSTEIN covers this front left B4 air strut with its Limited Lifetime Warranty, and the strut is made in Germany. Bulletproof Automotive handles any claim with BILSTEIN for the owner, so the front left strut for the W166 or X166 is supported by the place it was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "AL13 Lux Series LUX03 Three-Piece Wheel" url: "https://bulletproof2026.magepitstop.com/product/al13-lux03-three-piece-lux-series/" lang: "en-US" type: "product" description: "The AL13 LUX03 Three-Piece sets the densest spoke pattern in the Lux Series, made up of slim spokes that widen into blade-like tips, inside a separate outer lip. Diameter, width, and offset are set independently for flush or widebody fitments," last_modified: "2026-11-13T20:52:00+00:00" price: "<span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,000.00</bdi></span> <span aria-hidden="true">–</span> <span class="woocommerce-Price-amount amount" aria-hidden="true"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,600.00</bdi></span><span class="screen-reader-text">Price range: $3,000.00 through $3,600.00</span>" sku: "" in_stock: true attributes: Diameter: "19"" custom_fields: featured_product_description: "AL13 C-Series C020 Three Piece Wheel" --- # AL13 Lux Series LUX03 Three-Piece Wheel # AL13 Lux Series LUX03 Three-Piece Wheel The AL13 LUX03 Three-Piece takes the densest spoke pattern in AL13’s Lux Series and builds it on a modular three-piece wheel, with a separate outer lip around the face. Lux Series wheels use elegant multi-spoke layouts that reach the outer edge, so the wheel looks larger and more refined than a typical design of the same diameter. The LUX03 mixes heritage styling with modern machining, suits almost any car, and is one of AL13’s top-selling wheels worldwide. ### LUX03 - On the LUX03 Three-Piece, dozens of slim spokes radiate from a compact hub, starting thin and widening into pointed, blade-like tips that stop at the inner edge of the lip. A fine machined line runs along each spoke. Against the  lip, the spoke faces and dark gaps between them create a sharp turbine effect that stands out in direct sunlight. The look takes after the wire wheels of classic luxury cars, but in solid forged aluminum. As width increases and offset drops, the spokes sit deeper inside the barrel, so the same design can look formal on a large sedan or more aggressive on a lowered or widebody build. ### The Ultimate in Customization & Fitment - AL13’s 3-piece wheels are modular, so diameter, width, and offset are each set independently. That gives the LUX03 Three-Piece the range to sit flush on a stock-body car or carry a deep, stepped lip on a widebody build, with every corner specified separately. ### Hardware Options - The LUX03 Three-Piece can be assembled with hidden or exposed hardware. Hidden hardware, as shown, leaves a clean polished band around the spokes, so the eye goes straight to the face. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip, which adds even more detail to an already intricate design and trims a little unsprung weight compared with steel. Titanium is available in PVD Black, Raw Titanium, or Burnt Titanium. ### Center-Cap Options - Every AL13 center cap style is available on the LUX03 Three-Piece, including the 1-Piece Cap, the Center Lock Style Cap, and the Multi-Piece Cap. The Multi-Piece Cap can be built with a twill or forged carbon background in matte or gloss, or without carbon for a cleaner face. AL13’s premium cap finishes lay a transparent powder coat over a brushed or polished base so the machining shows through, and each piece of the cap can be finished in gloss, satin, or textured. **1-Piece Cap:** The AL13 Standard Wheel Cap is cut on a 3-axis CNC mill from a single forged billet, giving it crisp edges and a smooth surface. It can be finished in any color, matched to the wheel or as a contrasting accent. Color-filled AL13 logos are an optional upgrade that links the cap to the paint, wheel, or interior. - **OEM Center-Cap Detail:** The OEM Center-Cap Detail machines the center of the LUX03 Three-Piece to accept your factory cap from Ferrari, Lamborghini, Mercedes-Benz, Porsche, Rolls-Royce, and other makes. The original badge sits at the hub where all the spokes meet, framed by AL13’s forged construction and custom fitment. - **Floater Cap Lug Covers:** AL13 Floater Cap Lug Covers let you keep running your OEM floater caps on your new wheels. The cover fits over the lug nuts and holds the factory cap, so its logo stays upright as the wheel turns, just as it did on the original wheels. - **Floater Cap:** The AL13 Floater Cap has a weighted center that keeps the logo level whether the car is moving or parked. Lug covers come with it to hide the lug nuts and give the cap a clean mounting point. - **3-Piece Cap:** The AL13 Premium Upgraded 3-Piece Wheel Cap is built in layers, with each one specified separately. The background can be real twill or forged carbon fiber in satin or gloss, or left without carbon. The bezel and top center piece are colored independently, so one can match the calipers and the other the paint. Grade 5 titanium fasteners in Black Titanium, Natural Silver Titanium, Gold Titanium, or Burnt Titanium hold it together, and because they sit at the very center of the wheel, their finish is part of the design. - **3-Piece Floater Cap:** The AL13 3-Piece Floater Cap combines the layered three-piece build with a self-righting center, so the logo stays level as the wheel turns. It includes real carbon fiber logos and titanium bolts, with the bolts offered in several finishes. - **Center-Lock Style Cap:** AL13’s Center Lock Style Cap makes a 5-lug or 6-lug wheel look like a center lock. A CNC-milled forged billet cover hides the lug nuts, and the cap mounts over it, which brings designs usually reserved for true center lock hubs to far more vehicles. The proprietary three-piece cap press-fits instead of threading on, so the logo stays centered and lined up with the spokes. The bezel and top center piece take separate colors, and the background comes in real twill or forged carbon fiber, satin or gloss, or without carbon. An optional OEM cap detail accepts your factory Ferrari, Lamborghini, or McLaren emblem. ### Finishing - **Standard Colors: **Available in gloss, satin or textured clear coat options. Forged Graphite - Forged Silver - Heritage Gold - Jet Black - Race Gold - Terra Bronze - Tesora White - Titanium Gold - **Transparent Colors: **These are colors available for an additional charge. Offered in a gloss or satin finish with a base in brushed, high luster polish, or stone. Carbon Copper - Carbon Red - Clear - Liquid Bronze - Olympic Gold - Royal Blue - Shadow Black - Shadow Grey - Shadow Silver - **Special Colors:** Special Colors go beyond a single finish, with 2-Tone brushed or polished face edges set against a solid color, mirror-bright Triple Chrome Plate, or Paint Matching to your vehicle’s exact body color. 2-Tone - Paint Match - Triple Chrome Plate ### **Features** - Lux Series - Timeless luxury designs - Lightweight - Three-piece configuration - Aerospace grade 6061 T6 forged aluminum material - Tailor-made and built-to-order for specific vehicle fitment - Milled back-side pocketing for un-sprung mass reduction, promotion of cornering dynamics, stopping power and acceleration - Hidden or exposed hardware options - Modular width availability - Center-lock option - Boundless component finishing options - Multi-piece construction allowing for easily replaceable components - Logo text fill _(3 or more instances)_ - Custom logos engraving ### Specifications - **Wheel Series:** Lux Series - **Wheel Model:** LUX03 - **Wheel Configuration:** Three-piece modular - **Diameters:** 19″ - 20″ - 21″ - 22″ - 23″ - 24″ - 26″ - **Widths:** 6″ - 6.5″ - 7″ - 7.5″ - 8″ - 8.5″ - 9″ - 9.5″ - 10″ - 10.5″ - 11″ - 11.5″ - 12″ - 12.5″ - 13″ - 13.5″ - 14″ - 14.5″ - 15″ - 15.5″ - 16″ - **Bolt Patterns:** 5-lug - 6-lug - Center-lock ### **Other LUX03 Configurations** - [LUX SERIES 1-piece monoblock](https://bulletproofautomotive.com/product/al13-lux03-monoblock-lux-series/) - CARBON SERIES carbon 2-piece ### Notes - **AL13 Wheels are all sold individually** - **Custom colors can be requested** - **AL13 Wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” AL13 wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The [Bulletproof Team](https://bulletproofautomotive.com/contact/?ref-url=https://bulletproofautomotive.com/) will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application. ** ### Frequently Asked Questions - **How is the LUX03 Three-Piece different from the LUX03 Monoblock?** Both have the same dense face of slim, blade-tipped spokes. The AL13 LUX03 Three-Piece adds a separate outer lip and modular construction, so width and offset are set independently for flush or widebody fitments, with replaceable components and a hidden or exposed hardware choice. The LUX03 Monoblock is forged as one piece, runs its spokes right to the rim, and is the lighter of the two. - **Does the outer lip change the look of the LUX03 design?** Yes, it frames the spokes. On the LUX03 Monoblock, the blade tips reach almost to the edge of the wheel. On the AL13 LUX03 Three-Piece, they stop the lip, which sets off the busy center and gives the wheel a more classic, coach-built look. A deeper lip makes that contrast even stronger. - **Is the LUX03 Three-Piece a good fit for a lowered or widebody build?** It is. Lowered luxury cars and widebody builds often need widths and offsets that a one-piece wheel can’t reach, and the modular build of the LUX03 Three-Piece covers that range. Pushing the face deeper behind the lip on a lower-offset spec makes the dense spoke pattern look more aggressive while keeping its upscale character. - **Should I choose hidden or exposed hardware?** With this many spokes, hidden hardware is usually the cleaner choice. It leaves a smooth polished band around the face of the LUX03 Three-Piece and keeps all the attention on the spokes. Exposed Grade 5 titanium hardware adds a ring of bolts just inside the lip for extra detail, with a small weight saving over steel. Titanium comes in PVD Black, Raw Titanium, or Burnt Titanium. - **What sizes is the LUX03 Three-Piece available in?** The AL13 LUX03 Three-Piece is built to order in diameters of 19″, 20″, 21″, 22″, 23″, 24″, and 26″, with widths from 6″ to 16″ in half-inch steps. It’s offered in 5-lug, 6-lug, and center-lock, with each wheel’s offset set for your car. AL13 wheels are sold individually, with a lead time of a few weeks once your spec is finalized. # About AL13 As a renowned leader in the manufacture of performance, luxury and SUV wheels located in Anaheim California USA, AL13 is known throughout the industry for its commitment to priding quality craftsmanship. Utilizing only metals and materials like 6061 T6 aluminum, Titanium alloys, 5454 H34 steel alloy; Acrylics Ceramics & Carbon Fiber fibers with their advanced machining techniques producing superior custom finishes. With experts that account for fitments; tracking systems/standards backed by an impeccable Quality Control team assures long-term dynamic performance along with product integrity from this world’s most distinctive wheel brand. --- --- --- title: "BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM [48-349932]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-997-porsche-911-carrera-without-pasm-48-349932/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM   Nine damping settings and linear springs for the rear-drive 997 Carrera, Carrera S, GTS and Speedster built without PASM." last_modified: "2026-11-13T20:16:44+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,042.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,042.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,489.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,489.00.</span>" sku: "48-349932" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" regular_stock: "t" upc: "651860944876" brand: "Bilstein" part_number: "48-349932" map: "3489.0" cost: "2984.53" --- # BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM [48-349932] # BILSTEIN B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM BILSTEIN’s B16 PSS9 Coilovers for 997 Porsche 911 Carrera without PASM fit the rear-drive 997 Carrera and Carrera S from 2005 to 2011, the Carrera GTS of 2011 to 2012 and the 2011 Speedster. The kit gives them linear springs with tenders at both ends, clear anodized rear dampers and nine damping settings per corner. ### Design and Performance - A 289 lbs/in front spring and a 637 lbs/in rear, both linear, are rated for 775kg front and 1,180kg rear, with the height set on threaded bodies. ### Features - 9 damping settings per corner of the 997 Carrera, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the 997 Carrera ride height is set on the car and the bodies resist road salt - Linear springs in blue, rated by BILSTEIN for the weight on each axle of the 997 Carrera - Helper springs that hold the 997 Carrera main springs in place as the wheel drops away from the body - The B16 PSS9 Coilovers for 997 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 9 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 289 lbs/in, linear - **Rear spring rate:** 637 lbs/in, linear - **Tender spring rate:** 114 lbs/in front, 79 lbs/in rear - **Front lowering:** 15-35mm - **Rear lowering:** 15-35mm - **Maximum axle load:** 775kg front, 1,180kg rear - **Finish:** Zinc-plated front, clear anodized rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 997 _(including Carrera, Carrera S, Carrera GTS and Speedster)_ | 2005-2012 ### Notes - **BILSTEIN lists the kit for cars without PASM _(Porsche Active Suspension Management)_** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS9 Coilovers for 997 fit cars with PASM?** No. BILSTEIN lists this kit for rear-drive 997 Carrera models without PASM, Porsche Active Suspension Management. All-wheel-drive 997 models and the GT3 and GT2 take separate BILSTEIN kits, and PASM cars need a B16 DampTronic kit. The original window sticker or a VIN check confirms it. - **What ride height range does the kit give the rear-drive 997 Carrera?** For the rear-drive 997 Carrera, BILSTEIN quotes lowering of 15mm to 35mm front and rear compared with the factory ride height. On the 997 Carrera, the threaded bodies set the exact height inside that range. The B16 PSS9 Coilovers for 997 are rated for axle loads up to 775kg front and 1,180kg rear. - **What does the 9-stage adjuster change on the rear-drive 997 Carrera?** Each of the 9 clicks on the rear-drive 997 Carrera moves rebound and compression damping together, so the whole damper becomes firmer or softer. BILSTEIN chose the range for the 997 Carrera, which leaves the softest click civil on a poor road and gives the firmest click the control a smooth track asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the rear-drive 997 Carrera needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 997 Carrera before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS9 kit with its Limited 5-Year Warranty, and any claim for the rear-drive 997 Carrera goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right [44-283162]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-right-44-283162/" lang: "en-US" type: "product" description: "BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right   A front right air strut for the W166 ML and GLE and X166 GLS that plugs straight into the factory air suspension and" last_modified: "2026-11-13T20:21:44+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,999.00</bdi></span></del> <span class="screen-reader-text">Original price was: $1,999.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,874.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,874.00.</span>" sku: "44-283162" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860828527" brand: "Bilstein" part_number: "44-283162" map: "1874.0" cost: "1426.04" --- # BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right [44-283162] # BILSTEIN B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS, Front Right BILSTEIN’s B4 Air Suspension Strut for W166 Mercedes-Benz ML / GLE and X166 GLS replaces the front right air strut on vehicles fitted with the factory air suspension, from the 2012 ML350 to the 2019 GLS550. BILSTEIN supplies air suspension to carmakers as original equipment, and the B4 strut is built to connect to the original fittings and wiring without modification. A failing air strut announces itself with a corner that sags overnight or a compressor that never stops working, and the B4 restores the ride height and the composed, quiet ride these vehicles were sold on. ### Design and Performance - The B4 strut combines the air spring and the damper in one assembly, as the original does, with a fork-type lower mount and the vehicle-specific upper mount. It runs a monotube damper inside the air spring and connects directly to the original connectors, so the factory air suspension controller manages it exactly as before. ### Features - Direct OE replacement for the front right air suspension strut - Connects to the original air and electrical connectors with no modification - Air spring and monotube damper combined in one assembly - Fork-type lower mount and vehicle-specific upper mount, finished in black paint - Made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Position:** Front right - **Collapsed length:** 29.02in - **Extended length:** 33.69in - **Lower mount:** Fork - **Upper mount:** Vehicle-specific - **Damper design:** Monotube - **Dust boot included:** No - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Mercedes-Benz GLE300d:** W166 _(4Matic)_ | 2016-2017 - **Mercedes-Benz GLE400:** W166 _(4Matic)_ | 2016-2017 and 2019 - **Mercedes-Benz GLE550:** W166 _(4Matic)_ | 2018 - **Mercedes-Benz GLE550e:** W166 _(4Matic)_ | 2016-2018 - **Mercedes-Benz GLS550:** X166 _(4Matic)_ | 2017-2019 - **Mercedes-Benz ML250:** W166 _(Bluetec 4Matic)_ | 2015 - **Mercedes-Benz ML350:** W166 _(4Matic and Bluetec 4Matic)_ | 2012-2015 - **Mercedes-Benz ML400:** W166 _(4Matic)_ | 2015 - **Mercedes-Benz ML550:** W166 | 2012-2014 ### Notes - **Sold individually: this B4 Air Suspension Strut fits the front right corner only** - **For vehicles equipped with the factory air suspension** - **The front left strut is sold separately as the [B4 Air Suspension Strut for the front left corner](https://bulletproofautomotive.com/product/bilstein-b4-air-suspension-strut-w166-ml-gle-x166-gls-front-left-44-257200/)** - **Have the ride height checked and a wheel alignment carried out after installation** ### Frequently Asked Questions - **Does the BILSTEIN B4 Air Suspension Strut fit both front corners?** No. This B4 Air Suspension Strut is the front right strut only and is sold individually. The front left strut is a separate BILSTEIN part number, so an owner replacing both front corners needs one of each. Many owners replace both front struts together so the two sides age and ride alike. - **Will the strut plug into the factory air suspension?** Yes. BILSTEIN designs the B4 strut to connect directly to the original air and electrical connectors of the vehicle, so it installs without modification and the factory air suspension controller manages it the same way it managed the original strut. - **Which vehicles does the strut fit?** BILSTEIN lists the W166 ML250, ML350, ML400 and ML550 from 2012 to 2015, the W166 GLE300d, GLE400, GLE550 and GLE550e from 2016 to 2019 and the X166 GLS550 from 2017 to 2019, all with air suspension. Check the exact model year against the Applications list before ordering. - **What are the signs of a failing front air strut?** Common signs are one corner sitting low after the vehicle has been parked, the air compressor running for long periods, a suspension warning on the dash, and a harsh or bouncy ride over bumps. A leak at the air spring is the usual cause, and the strut is replaced as an assembly. - **How is the BILSTEIN strut different from the original?** BILSTEIN supplies air suspension systems to carmakers as original equipment, and the B4 range is built to that standard to restore the original ride and handling. The strut is made in Germany and BILSTEIN backs it with a Limited Lifetime Warranty, handled for the owner by Bulletproof Automotive. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [49-349993]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-997-911-carrera-4-turbo-sport-49-349993/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version   The Sport Version DampTronic kit for the all-wheel-drive 997 with PASM, linear springs and a 15mm to 35mm drop." last_modified: "2026-11-13T20:17:40+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,186.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,186.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,589.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,589.00.</span>" sku: "49-349993" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" regular_stock: "t" upc: "651860944500" brand: "Bilstein" part_number: "49-349993" map: "3589.0" cost: "3087.78" --- # BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [49-349993] # BILSTEIN B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version BILSTEIN’s B16 DampTronic Coilovers for 997 Porsche 911 Carrera 4 and Turbo, in the Sport Version, fit the all-wheel-drive 997 with PASM: Carrera 4, 4S, Targa 4 and 4S from 2006 to 2012, the 2012 Carrera 4 GTS and the Turbo and Turbo S through 2013. PASM stays in control, and linear springs with tenders lower the car 15mm to 35mm. ### Features - Electronic dampers that plug into the 997 Carrera 4 and Turbo damping control and keep every factory mode - Monotube construction with a zinc-coated threaded body that sets the 997 Carrera 4 and Turbo ride height and guards against corrosion - Linear springs finished in blue, with rates matched to the front and rear axle loads of the 997 Carrera 4 and Turbo - Helper springs that hold the 997 Carrera 4 and Turbo main springs in place as the wheel drops away from the body - BILSTEIN Limited 5-Year Warranty, with the B16 DampTronic Coilovers for 997 made in Germany ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 342 lbs/in, linear - **Rear spring rate:** 565 lbs/in, linear - **Tender spring rate:** 79 lbs/in front, 79 lbs/in rear - **Front lowering:** 15-35mm - **Rear lowering:** 15-35mm - **Finish:** Zinc front, clear anodized rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 997 _(including Carrera 4, Carrera 4S, Targa 4, Targa 4S, Turbo, Turbo S and Carrera 4 GTS)_ | 2006-2013 ### Notes - **BILSTEIN lists the kit for cars with PASM _(Porsche Active Suspension Management)_** - **For the same cars without PASM, BILSTEIN makes the [B16 PSS10 Coilovers for 997 Carrera 4 and Turbo](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-997-porsche-911-carrera-4-turbo-sport-48-349949/)** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for 997 C4 replace 49-135985?** Yes. Kit 49-349993 supersedes the discontinued BILSTEIN kit 49-135985 for the all-wheel-drive 997 with PASM, according to the BILSTEIN distributor listing. It keeps PASM working, adds threaded height adjustment and uses the Sport Version spring rates. Owners of the earlier kit can order this one in its place. - **How much does the kit lower the 997 Carrera 4 and Turbo with PASM?** For the 997 Carrera 4 and Turbo with PASM, BILSTEIN quotes lowering of 15mm to 35mm front and rear compared with the factory ride height. The B16 DampTronic Coilovers for 997 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the 997 Carrera 4 and Turbo can run in practice. - **How is B16 DampTronic different from B16 PSS10?** The PSS10 kit is adjusted by hand, ten clicks per damper, for a 997 Carrera 4 and Turbo that left the factory on passive dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the 997 Carrera 4 and Turbo with PASM; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the 997 Carrera 4 and Turbo keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 997 Carrera 4 and Turbo with PASM needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 997 Carrera 4 and Turbo before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the 997 Carrera 4 and Turbo with PASM goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera 4 and Turbo is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4 [89-321294]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-981-porsche-cayman-gt4-89-321294/" lang: "en-US" type: "product" description: "BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4   Hand-built 2-way adjustable BILSTEIN race coilovers for the 2016 981 Cayman GT4." last_modified: "2026-11-13T20:21:07+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>9,272.60</bdi></span></del> <span class="screen-reader-text">Original price was: $9,272.60.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>7,999.00</bdi></span></ins><span class="screen-reader-text">Current price is: $7,999.00.</span>" sku: "89-321294" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860936901" brand: "Bilstein" part_number: "89-321294" map: "7999.0" cost: "7673.03" --- # BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4 [89-321294] # BILSTEIN EVO R Coilovers for 981 Porsche Cayman GT4 BILSTEIN’s EVO R Coilovers for 981 Porsche Cayman GT4 fit the 2016 GT4, the first Cayman built by Porsche’s GT department and a car that many owners take straight to the circuit. EVO R is BILSTEIN’s motorsport coilover, hand built in Germany with independent rebound and compression adjustment and 800 lbs/in linear springs at both ends. ### Design and Performance - Equal 800 lbs/in linear rates front and rear, with a 171 lbs/in front tender, are race rates for slick tires and a dedicated track car. ### Features - 2-way adjustable dampers for the 981 Cayman GT4, with independent rebound and compression control and 100 combinations - Height-adjustable monotube dampers with threaded bodies for setting the stance of the 981 Cayman GT4 - Linear springs finished in red, with rates matched to the front and rear axle loads of the 981 Cayman GT4 - Helper springs that hold the 981 Cayman GT4 main springs in place as the wheel drops away from the body - BILSTEIN Limited 90-Day Warranty, with the EVO R Coilovers for 981 made in Germany ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube - **Front spring rate:** 800 lbs/in, linear - **Rear spring rate:** 800 lbs/in, linear - **Front tender spring rate:** 171 lbs/in - **Finish:** Grey dampers, red springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **Porsche Cayman GT4:** 981C | 2016 ### Notes - **BILSTEIN lists the kit for the 2016 Cayman GT4** - **BILSTEIN does not publish lowering figures for this application** - **This is a motorsport kit; BILSTEIN covers EVO R with a Limited 90-Day Warranty** - **The images show a representative BILSTEIN EVO R kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO R Coilovers for 981 GT4 suit road driving?** They are built for motorsport. The EVO R Coilovers for 981 GT4 cars use race spring rates and BILSTEIN covers them with a Limited 90-Day Warranty. A GT4 that is mainly driven on the road is better served by its factory suspension or a road-focused kit. - **What are the EVO R adjusters for?** EVO R dampers for the 981 Cayman GT4 have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the 981 Cayman GT4 for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application. - **How low does the kit take the GT4?** BILSTEIN publishes no lowering range for the GT4 kit. The EVO R Coilovers for 981 GT4 cars set height on threaded bodies, so ride height and corner weights are set to suit the circuit, the tires and the driver during setup. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 981 Cayman GT4 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 981 Cayman GT4 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the 981 Cayman GT4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 981 Cayman GT4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [49-321067]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-f44-gran-coupe-f54-f60-49-321067/" lang: "en-US" type: "product" description: "BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman   Plug-and-play BILSTEIN EVO SE dampers for the adaptive-damper F44 Gran Coupe and F54 and F60 MINI." last_modified: "2026-11-13T20:20:42+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,586.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,586.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,299.00.</span>" sku: "49-321067" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860902289" brand: "Bilstein" part_number: "49-321067" map: "2299.0" cost: "1893.05" --- # BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [49-321067] # BILSTEIN EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman BILSTEIN’s EVO SE Plug and Play Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman fit the 228i and 228i xDrive Gran Coupe, the Clubman S and JCW ALL4 and the Countryman S ALL4, on cars built with adaptive dampers. The kit keeps the factory damping control working and lowers the front 30mm to 50mm. ### Features - Electronic damping control through the factory system of the F44 and MINI, connected at the original plugs - Height-adjustable twintube and monotube dampers with threaded bodies for setting the stance of the F44 and MINI - Progressive springs finished in black, with rates matched to the front and rear axle loads of the F44 and MINI - BILSTEIN Limited 5-Year Warranty, with the EVO SE Plug and Play Coilovers made in Germany ### Specifications - **Damping adjustment:** Electronic, through the factory adaptive system - **Damper design:** Twintube and monotube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 570 lbs/in, progressive - **Front lowering:** 30-50mm - **Rear lowering:** 15-35mm or 10-35mm, by model - **Maximum axle load:** 1,145kg front, 1,070kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 2 Series:** F44 | 2020-2025 - **MINI Clubman:** F54 | 2016-2024 - **MINI Countryman:** F60 | 2017-2024 ### Notes - **BILSTEIN lists the kit for cars with electronic suspension _(adaptive dampers)_** - **For cars without adaptive dampers, BILSTEIN makes the [EVO S Coilovers for F44, F54 and F60](https://bulletproofautomotive.com/product/bilstein-evo-s-coilovers-for-f44-bmw-2-series-gran-coupe-mini-f54-f60-47-322547/)** - **The images show a representative BILSTEIN EVO SE kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO SE Plug and Play Coilovers for F44 cars fit the MINI JCW Clubman?** Yes. BILSTEIN lists the 2017 to 2024 Clubman John Cooper Works ALL4 with electronic suspension, along with the Clubman S and S ALL4, the Countryman S ALL4 and the 228i Gran Coupe. Cars without adaptive dampers take the EVO S kit instead. - **How much does the kit lower the F44 Gran Coupe and F54 and F60 MINI?** BILSTEIN quotes 30mm to 50mm of lowering at the front, 15mm to 35mm at the rear on the 228i Gran Coupe and 10mm to 35mm at the rear on the Clubman and Countryman. The EVO SE Plug and Play Coilovers for these cars are rated for 1,145kg front and 1,070kg rear. - **Is any coding needed after installation?** BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control of the F44 Gran Coupe and F54 and F60 MINI. The dampers connect at the factory plugs and the F44 and MINI keeps running its own electronic damping, so the job is mechanical, followed by a wheel alignment. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the F44 Gran Coupe and F54 and F60 MINI needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the F44 and MINI before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO SE kit with its Limited 5-Year Warranty, and any claim for the F44 Gran Coupe and F54 and F60 MINI goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F44 and MINI is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [47-322547]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-f44-bmw-2-series-gran-coupe-mini-f54-f60-47-322547/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman   One BILSTEIN EVO S kit for the F44 228i Gran Coupe, the F54 Clubman and the F60 Countryman." last_modified: "2026-11-13T20:19:54+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,136.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,136.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,899.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,899.00.</span>" sku: "47-322547" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860893211" brand: "Bilstein" part_number: "47-322547" map: "1899.0" cost: "1570.07" --- # BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman [47-322547] # BILSTEIN EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman BILSTEIN’s EVO S Coilovers for F44 BMW 2 Series Gran Coupe and F54 / F60 MINI Clubman and Countryman cover three cars on one front-drive-based platform: the 228i and 228i xDrive Gran Coupe, the Clubman S and JCW ALL4, and the Countryman S ALL4. EVO S gives them threaded height adjustment and fixed street valving chosen by BILSTEIN. ### Features - Fixed damping valving chosen by BILSTEIN for the F44 and MINI, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the F44 and MINI - Progressive springs finished in black, with rates matched to the front and rear axle loads of the F44 and MINI - BILSTEIN Limited 5-Year Warranty, with the EVO S Coilovers for F44 made in Germany ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 570 lbs/in, progressive - **Front lowering:** 30-50mm - **Rear lowering:** 15-35mm or 15-40mm, by model - **Maximum axle load:** 1,145kg front, 1,205kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 2 Series:** F44 _(including 228 xDrive Gran Coupe, 228i Gran Coupe and 228i xDrive Gran Coupe)_ | 2020-2025 - **MINI Clubman:** F54 _(including S, John Cooper Works ALL4 and S ALL4)_ | 2016-2024 - **MINI Countryman:** F60 _(including S ALL4)_ | 2017-2024 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For cars with adaptive dampers, BILSTEIN makes the [EVO SE Plug and Play Coilovers for F44, F54 and F60](https://bulletproofautomotive.com/product/bilstein-evo-se-plug-and-play-coilovers-f44-gran-coupe-f54-f60-49-321067/)** - **The images show a representative BILSTEIN EVO S kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO S Coilovers for F44 fit cars with adaptive dampers?** No. BILSTEIN lists this kit for the F44, F54 and F60 models without electronic suspension. For the same cars with adaptive dampers, BILSTEIN makes the EVO SE kit, which connects to the factory damping control and which Bulletproof Automotive also stocks. - **How much lower will the F44 Gran Coupe and MINI Clubman and Countryman sit?** BILSTEIN quotes 30mm to 50mm of lowering at the front for all three cars, with 15mm to 35mm at the rear on the 228i Gran Coupe and 15mm to 40mm on the Clubman and Countryman. The EVO S Coilovers for F44 cars are rated for 1,145kg front and 1,205kg rear. - **What is the difference between EVO S and EVO T1?** For the F44 Gran Coupe and MINI Clubman and Countryman, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the F44 and MINI to the track. For a F44 and MINI that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the F44 Gran Coupe and MINI Clubman and Countryman needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the F44 and MINI before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the F44 Gran Coupe and MINI Clubman and Countryman goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F44 and MINI is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for Tesla Model Y AWD [47-348615]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-tesla-model-y-awd-47-348615/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for Tesla Model Y AWD   Threaded BILSTEIN EVO dampers with fixed street valving for the Long Range and Performance Model Y." last_modified: "2026-11-13T20:19:50+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,024.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,024.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,799.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,799.00.</span>" sku: "47-348615" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" regular_stock: "t" upc: "651860942247" brand: "Bilstein" part_number: "47-348615" map: "1799.0" cost: "1490.85" --- # BILSTEIN EVO S Coilovers for Tesla Model Y AWD [47-348615] # BILSTEIN EVO S Coilovers for Tesla Model Y AWD BILSTEIN’s EVO S Coilovers for Tesla Model Y AWD fit the dual-motor Long Range and Performance Model Y from 2020 to 2024. The Model Y is a tall, heavy crossover that rolls more than its acceleration suggests, and EVO S gives it threaded, height-adjustable dampers with fixed valving that BILSTEIN sets for the vehicle. ### Design and Performance - Springs run 400 lbs/in linear at the front and 571 lbs/in progressive at the rear, on grey EVO dampers with black springs. ### Features - Fixed damping valving chosen by BILSTEIN for the Model Y, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the Model Y - Linear front and progressive rear springs in black, rated by BILSTEIN for the weight on each axle of the Model Y - The EVO S Coilovers for Tesla are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, linear - **Rear spring rate:** 571 lbs/in, progressive - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Tesla Model Y:** _(including Long Range and Performance)_ | 2020-2024 ### Notes - **BILSTEIN lists the kit for the dual-motor Model Y without electronic suspension** - **BILSTEIN does not publish lowering figures for this application** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO S Coilovers for Tesla Model Y fit the Performance?** Yes. BILSTEIN lists the 2020 to 2024 Model Y Long Range and Performance, both dual-motor, without electronic suspension. The rear-drive Model Y is not on the list for this kit, so check the drivetrain of the vehicle before ordering. Bulletproof Automotive can confirm from the VIN. - **What is the difference between EVO S and EVO T1?** For the Model Y, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the Model Y to the track. For a Model Y that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **How low does the kit take the Model Y?** BILSTEIN does not publish a lowering range for this application. The EVO S Coilovers for Tesla Model Y set ride height on threaded bodies, so the owner chooses the stance during installation, and then has the alignment set at that height. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the Model Y needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Model Y before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the Model Y goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Model Y is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC [49-294651]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-irc-coilovers-for-8p-audi-a3-gti-golf-jetta-passat-cc-49-294651/" lang: "en-US" type: "product" description: "BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC   Electronic Comfort and Sport damping, by button or by app, added to the 8P A3 and the Mk5 and Mk6 Volkswagen family." last_modified: "2026-11-13T20:21:19+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,303.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,303.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,978.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,978.00.</span>" sku: "49-294651" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860856308" brand: "Bilstein" part_number: "49-294651" map: "2978.0" cost: "2569.71" --- # BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC [49-294651] # BILSTEIN B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC BILSTEIN’s B16 iRC Coilovers for 8P Audi A3 and Volkswagen GTI, Golf, Jetta, Passat and CC add electronically adjustable dampers to cars that never had them, from the 2006 A3 to Jetta and Passat models of the late 2010s. A cabin button switches between Comfort and Sport, and the iRC app can switch automatically from measured g-forces. ### Features - Electronically adjustable BILSTEIN dampers with Comfort and Sport settings, selected by a button in the cabin - iRC smartphone app for setting when the dampers switch from Comfort to Sport, with a g-force graph from the accelerometer in the control module - Manual switching between Comfort and Sport with the BILSTEIN Sport button, with or without the app - Monotube dampers in threaded, zinc-coated bodies for setting ride height on the 8P A3 and Mk5 and Mk6 Volkswagen models - The B16 iRC Coilovers for 8P cars are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic Comfort and Sport modes, switched by button or the iRC app - **Damper design:** Monotube - **Front spring rate:** 342 lbs/in, progressive - **Rear spring rate:** 423 lbs/in, progressive - **Front lowering:** 40-50mm or 20-40mm, by model - **Rear lowering:** 30-50mm or 20-40mm, by model - **Maximum axle load:** Up to 1,140kg front, 1,040kg rear, by model - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Audi A3:** 8P | 2006-2013 - **Audi A3 Quattro:** 8P | 2006-2013 - **Volkswagen CC:** 357 | 2009-2017 - **Volkswagen GTI:** Mk5 / Mk6 | 2007-2014 - **Volkswagen Golf:** Mk6 | 2010-2014 - **Volkswagen Jetta:** Mk5 / Mk6 | 2006-2010 and 2012-2018 - **Volkswagen Passat:** B6 / NMS | 2005-2010 and 2012-2021 ### Notes - **BILSTEIN states that the iRC app is compatible with iOS only** - **The images show a representative BILSTEIN B16 kit and the BILSTEIN iRC control module; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Does the BILSTEIN B16 iRC Coilovers for 8P app work on Android?** No. BILSTEIN states that the iRC app is compatible with iOS only. The dampers can still be switched between Comfort and Sport at any time with the BILSTEIN Sport button in the cabin, so the kit remains fully usable without the app on an Android phone. - **What ride height range does the kit give the 8P A3 and Volkswagen models?** BILSTEIN quotes 40mm to 50mm of lowering at the front and 30mm to 50mm at the rear for the A3, and 20mm to 40mm front and rear for the Volkswagen models. The B16 iRC Coilovers for 8P cars are rated for axle loads up to 1,140kg front and 1,040kg rear. - **How does the iRC automatic switching work?** The control module contains an accelerometer that records g-forces while driving, and the iRC app shows them as a graph. The driver chooses the point at which the dampers should switch from Comfort to Sport, so the B16 iRC Coilovers for 8P cars firm up on their own when cornering or braking hard. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 8P A3 and Volkswagen models needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 8P A3 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 iRC kit with its Limited 5-Year Warranty, and any claim for the 8P A3 and Volkswagen models goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 8P A3 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop [46-281784]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-10mm-rear-drop-46-281784/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop   A fixed drop of 20mm at the front and 10mm at the rear for the F82 M4, with black Eibach springs." last_modified: "2026-11-13T20:18:28+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,094.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,094.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,569.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,569.00.</span>" sku: "46-281784" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" units_per_sku: "1" upc: "651860869285" brand: "Bilstein" part_number: "46-281784" map: "2569.0" cost: "2222.61" --- # BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop [46-281784] # BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 10mm Rear Drop BILSTEIN’s B12 Pro-Kit for F82 BMW M4, in the 20mm front and 10mm rear version, lowers the 2015 to 2020 M4 mostly at the nose, for a slight forward rake. BILSTEIN dampers work with Eibach Pro-Kit springs finished in black, and the ride height is fixed once installed. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the F82 M4 - Valving set by BILSTEIN to control the lower spring, so the F82 M4 is not left underdamped - Fixed ride height on the F82 M4, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for F82 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 20mm - **Rear lowering:** 10mm - **Maximum axle load:** 990kg front, 1,170kg rear - **Finish:** Yellow dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **BMW M4:** F82 | 2015-2020 ### Notes - **BILSTEIN lists this kit for cars with electronic suspension; ask Bulletproof Automotive how the factory damping system is handled before ordering** - **This is a fixed-height kit; ride height and damping are not adjustable** - **For a 15mm rear drop, BILSTEIN makes the [B12 Pro-Kit for F82 M4 with 15mm rear drop](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-15mm-rear-drop-46-276223/)** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **How do the two BILSTEIN B12 Pro-Kit for F82 M4 kits differ?** BILSTEIN lists two B12 Pro-Kits for the 2015 to 2020 M4. This one lowers the car 20mm at the front and 10mm at the rear, rated for 990kg front and 1,170kg rear, with black springs. The other drops the rear 15mm. Bulletproof Automotive can help choose between them. - **What ride height range does the kit give the F82 M4?** For the F82 M4, BILSTEIN quotes lowering of 20mm at the front and 10mm at the rear compared with the factory ride height. The springs set that height on the F82 M4, so it stays fixed once installed. The B12 Pro-Kit for F82 is rated for axle loads up to 990kg front and 1,170kg rear. - **Why replace the dampers when lowering the F82 M4?** The factory dampers on the F82 M4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the F82 M4 underdamped and shorten damper life. Here BILSTEIN valves each damper for its Eibach spring, which keeps the F82 M4 controlled at the new height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the F82 M4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the F82 M4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the F82 M4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F82 M4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for Tesla Model 3 RWD [47-318885]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-tesla-model-3-rwd-47-318885/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for Tesla Model 3 RWD   A lower, tighter rear-drive Model 3 on threaded BILSTEIN EVO dampers with fixed street valving." last_modified: "2026-11-13T20:19:46+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,047.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,047.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,820.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,820.00.</span>" sku: "47-318885" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860921921" brand: "Bilstein" part_number: "47-318885" map: "1820.0" cost: "1507.35" --- # BILSTEIN EVO S Coilovers for Tesla Model 3 RWD [47-318885] # BILSTEIN EVO S Coilovers for Tesla Model 3 RWD BILSTEIN’s EVO S Coilovers for Tesla Model 3 RWD fit the rear-drive Model 3 as BILSTEIN lists it, from the 2017 Long Range to the 2024 base car, the Standard Plus included. Heavy batteries and instant torque reward good damping, and EVO S brings threaded, height-adjustable dampers with fixed valving that BILSTEIN sets for the car. ### Design and Performance - A 400 lbs/in linear front spring and a 571 lbs/in progressive rear carry the battery mass, and BILSTEIN quotes up to 45mm of front lowering and 20mm to 50mm at the rear. ### Features - Fixed damping valving chosen by BILSTEIN for the Model 3, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the Model 3 - Linear front and progressive rear springs in black, rated by BILSTEIN for the weight on each axle of the Model 3 - The EVO S Coilovers for Tesla are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, linear - **Rear spring rate:** 571 lbs/in, progressive - **Front lowering:** 5-45mm - **Rear lowering:** 20-50mm - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Tesla Model 3:** _(including Long Range and Standard Plus)_ | 2017-2024 ### Notes - **BILSTEIN lists the kit for the rear-drive Model 3 without electronic suspension** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO S Coilovers for Tesla Model 3 fit the dual-motor cars?** BILSTEIN lists this kit for the rear-drive Model 3: the 2017 to 2019 and 2022 to 2024 base car, the 2017 to 2018 Long Range and the 2020 to 2021 Standard Plus. All-wheel-drive and Performance models are not on the list, so check the drivetrain before ordering. - **What ride height range does the kit give the rear-drive Model 3?** For the rear-drive Model 3, BILSTEIN quotes lowering of 5mm to 45mm at the front and 20mm to 50mm at the rear compared with the factory ride height. The EVO S Coilovers for Tesla set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Model 3 can run in practice. - **What is the difference between EVO S and EVO T1?** For the rear-drive Model 3, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the Model 3 to the track. For a Model 3 that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the rear-drive Model 3 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Model 3 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the rear-drive Model 3 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Model 3 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM [49-350234]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-981-718-boxster-cayman-pasm-49-350234/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM   A subtle drop for the PASM-equipped 981 and 718 Boxster and Cayman, with PASM still in charge." last_modified: "2026-11-13T20:17:35+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,290.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,290.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,969.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,969.00.</span>" sku: "49-350234" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860944029" brand: "Bilstein" part_number: "49-350234" map: "2969.0" cost: "2560.72" --- # BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM [49-350234] # BILSTEIN B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM BILSTEIN’s B16 DampTronic Coilovers for 981 and 718 Porsche Boxster and Cayman with PASM fit the PASM-equipped 981 Boxster and Cayman from 2013 and 2014 and the 718 Boxster and Cayman through 2024, GTS 4.0 and GT4 included. PASM keeps controlling the dampers, and the drop is kept small, up to 20mm at the front and 10mm to 25mm at the rear. ### Features - Works with the factory electronic suspension of the 981 and 718, retaining its controls and active functions - Monotube dampers in zinc-coated threaded bodies, so the 981 and 718 ride height is set on the car and the bodies resist road salt - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the 981 and 718 - The B16 DampTronic Coilovers for 981 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 286 lbs/in, progressive - **Rear spring rate:** 357 lbs/in, progressive - **Front lowering:** 0-20mm - **Rear lowering:** 10-25mm - **Maximum axle load:** 785kg front, 930kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 718 Boxster:** 982 | 2017-2024 - **Porsche 718 Cayman:** 982C | 2017-2024 - **Porsche Boxster:** 981 | 2013-2016 - **Porsche Cayman:** 981C | 2014-2016 ### Notes - **BILSTEIN lists the kit for cars with PASM _(Porsche Active Suspension Management)_** - **For cars without PASM, BILSTEIN makes the [B16 PSS10 Coilovers for 981 and 718](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-981-and-718-porsche-boxster-cayman-48-347792/)** - **The images show a representative BILSTEIN B16 DampTronic kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for 981 cars fit the 718 GT4?** BILSTEIN lists the 2020 to 2023 718 Cayman GT4 with PASM, along with the 981 and 718 Boxster and Cayman from 2013 to 2024. The 2025 models are not in the BILSTEIN list for this kit, so check a later car with Bulletproof Automotive. - **What ride height range does the kit give the 981 and 718 Boxster and Cayman with PASM?** For the 981 and 718 Boxster and Cayman with PASM, BILSTEIN quotes lowering of 0mm to 20mm at the front and 10mm to 25mm at the rear compared with the factory ride height. On the 981 and 718, the threaded bodies set the exact height inside that range. The B16 DampTronic Coilovers for 981 are rated for axle loads up to 785kg front and 930kg rear. - **How is B16 DampTronic different from B16 PSS10?** B16 PSS10 uses a manual 10-click adjuster and suits a 981 and 718 built without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the 981 and 718 Boxster and Cayman with PASM; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the 981 and 718 keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 981 and 718 Boxster and Cayman with PASM needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 981 and 718 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the 981 and 718 Boxster and Cayman with PASM goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 981 and 718 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4 [49-309119]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-for-g8x-bmw-m2-m3-m4-49-309119/" lang: "en-US" type: "product" description: "BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4   EVO SE Plug and Play Coilovers for the G8X M2, M3 and M4: a lower stance on adjustable bodies, with the factory drive modes" last_modified: "2026-11-13T20:21:34+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,939.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,939.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,501.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,501.00.</span>" sku: "49-309119" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860934723" brand: "Bilstein" part_number: "49-309119" map: "3501.0" cost: "2865.28" --- # BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4 [49-309119] # BILSTEIN EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4 BILSTEIN’s EVO SE Plug and Play Coilovers for G8X BMW M2 / M3 / M4 drop the G87, G80 and G82 without taking away the electronic damping BMW builds into every one of them. The kit connects to the factory damper control, so the drive-mode buttons keep changing the damping as they did on the original struts, while threaded bodies let you set the stance you want. BILSTEIN designs and builds the EVO range in Germany and tunes it on the Nürburgring. ### Design and Performance - EVO SE pairs electronically controlled BILSTEIN dampers with progressive springs: 488.2 lbs/in at the front and 912.67 lbs/in at the rear. The modest drop keeps suspension travel on a car that already runs low. The dampers plug into the original connectors and are driven by the factory control unit, so the adaptive system reads them as its own. ### Features - Electronic damping control through the factory BMW system, plug and play at the original connectors - Drive-mode damping settings stay in use after installation - Threaded, height-adjustable damper bodies for setting front and rear ride height - Progressive springs matched to the G8X axle loads, finished in black over grey dampers - Designed and built in Germany, with the tune developed on the Nürburgring - Covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping control:** Electronic, through the factory adaptive system - **Damper design:** Twintube and monotube - **Front spring rate:** 488.2 lbs/in, progressive - **Rear spring rate:** 912.67 lbs/in, progressive - **Front lowering:** 10-25mm - **Rear lowering:** 5-20mm - **Maximum axle load:** 1,085kg front, 1,185kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW M2:** G87 | 2023-2025 - **BMW M3:** G80 _(including Competition)_ | 2021-2025 - **BMW M4:** G82 _(including Competition, CSL and CS)_ | 2021-2025 ### Notes - **The EVO SE Plug and Play Coilovers work with the factory adaptive suspension of the G8X M cars** - **BILSTEIN lists fitment through the 2025 model year; ask Bulletproof Automotive before ordering for a later car** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO SE Plug and Play Coilovers keep the factory adaptive dampers working?** Yes. BILSTEIN builds the EVO SE kit to run through the electronic damping control BMW fits to the G87 M2, G80 M3 and G82 M4. The dampers connect to the original plugs, so the factory system keeps controlling them and the drive-mode settings still change the damping. - **How much lower will a G80 M3 or G82 M4 sit?** BILSTEIN quotes 10mm to 25mm of lowering at the front and 5mm to 20mm at the rear. The threaded bodies set the exact height inside that range. The EVO SE Plug and Play Coilovers for G8X cars are rated for axle loads up to 1,085kg at the front and 1,185kg at the rear. - **Does the kit fit the M4 CSL and M4 CS?** Yes. BILSTEIN lists the 2023 M4 CSL and the 2025 M4 CS alongside the standard and Competition models of the G82 M4, the G80 M3 from 2021 and the G87 M2 from 2023. Owners of any other G8X variant should check fitment with Bulletproof Automotive before ordering. - **Is any coding needed after installation?** BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control. The kit connects at the factory plugs and the car keeps running its own adaptive system, so the installation is mechanical rather than an electronics project, followed by a wheel alignment. - **What warranty comes with the kit?** BILSTEIN covers the EVO SE kit with its Limited 5-Year Warranty. The kit is designed and built in Germany, and Bulletproof Automotive handles any warranty claim with BILSTEIN for the owner, so support runs through the same place the kit was bought. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM [49-349986]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-987-porsche-boxster-cayman-pasm-49-349986/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM   For the PASM-equipped 987 Boxster and Cayman: a 25mm to 45mm drop with PASM still in charge of the dampers." last_modified: "2026-11-13T20:17:31+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,622.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,622.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,199.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,199.00.</span>" sku: "49-349986" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860945705" brand: "Bilstein" part_number: "49-349986" map: "3199.0" cost: "2755.81" --- # BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM [49-349986] # BILSTEIN B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM BILSTEIN’s B16 DampTronic Coilovers for 987 Porsche Boxster and Cayman with PASM fit the 2005 to 2012 Boxster and 2006 to 2012 Cayman that left the factory with Porsche Active Suspension Management, the Boxster Spyder included. PASM keeps controlling the BILSTEIN dampers, and threaded bodies lower the car 25mm to 45mm at each end. It is the successor to the discontinued BILSTEIN kit 49-122046. ### Features - Dampers built to run on the factory electronic damping control of the 987 Boxster and Cayman, so the original buttons and modes keep working - Threaded, zinc-coated damper bodies for setting ride height at each corner of the 987 Boxster and Cayman - Springs and dampers tuned as a pair for the 987 Boxster and Cayman, with linear front and progressive rear spring rates and a blue finish - Helper springs that hold the 987 Boxster and Cayman main springs in place as the wheel drops away from the body - Built in Germany, the B16 DampTronic Coilovers for 987 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 289 lbs/in, linear - **Rear spring rate:** 371 lbs/in, progressive - **Front tender spring rate:** 114 lbs/in - **Front lowering:** 25-45mm - **Rear lowering:** 25-45mm - **Maximum axle load:** 775kg front, 940kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche Boxster:** 987 | 2005-2012 - **Porsche Cayman:** 987C | 2006-2012 ### Notes - **BILSTEIN lists the kit for cars with PASM _(Porsche Active Suspension Management)_** - **For cars without PASM, BILSTEIN makes the [B16 PSS9 Coilovers for 987](https://bulletproofautomotive.com/product/bilstein-b16-pss9-coilovers-for-987-boxster-cayman-without-pasm-48-347723/)** - **The images show a representative BILSTEIN B16 DampTronic kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for 987 cars replace 49-122046?** Yes. Kit 49-349986 is the successor to the discontinued BILSTEIN kit 49-122046 for the PASM-equipped 987 Boxster and Cayman. It keeps PASM working and adds threaded height adjustment for the same 2005 to 2012 cars, so owners of the earlier kit can order this one in its place. - **How much lower will the 987 Boxster and Cayman with PASM sit?** For the 987 Boxster and Cayman with PASM, BILSTEIN quotes lowering of 25mm to 45mm front and rear compared with the factory ride height. On the 987 Boxster and Cayman, the threaded bodies set the exact height inside that range. The B16 DampTronic Coilovers for 987 are rated for axle loads up to 775kg front and 940kg rear. - **How is B16 DampTronic different from B16 PSS10?** B16 PSS10 has a 10-click knob on each damper and is meant for a 987 Boxster and Cayman without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the 987 Boxster and Cayman with PASM; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the 987 Boxster and Cayman keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 987 Boxster and Cayman with PASM needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 987 Boxster and Cayman before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the 987 Boxster and Cayman with PASM goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 987 Boxster and Cayman is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [48-349949]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-997-porsche-911-carrera-4-turbo-sport-48-349949/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version   The Sport Version B16 kit for the all-wheel-drive 997, with linear springs, tender springs and ten clicks of damping per corner." last_modified: "2026-11-13T20:12:36+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,042.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,042.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,489.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,489.00.</span>" sku: "48-349949" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860944869" brand: "Bilstein" part_number: "48-349949" map: "3489.0" cost: "3003.0" --- # BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version [48-349949] # BILSTEIN B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, Sport Version BILSTEIN’s B16 PSS10 Coilovers for 997 Porsche 911 Carrera 4 and Turbo, in the Sport Version, fit the all-wheel-drive 997 Carrera 4, 4S, Targa 4 and Targa 4S, the 2012 Carrera 4 GTS, and the Turbo and Turbo S through 2013, on cars without PASM. Linear springs, tender springs and a 10-click adjuster per corner give these cars a firmer, more planted feel. ### Features - A 10-position adjuster on each 997 Carrera 4 and Turbo damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the 997 Carrera 4 and Turbo ride height and guards against corrosion - Linear springs finished in blue, with rates matched to the front and rear axle loads of the 997 Carrera 4 and Turbo - Helper springs that hold the 997 Carrera 4 and Turbo main springs in place as the wheel drops away from the body - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for 997 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 342 lbs/in, linear - **Rear spring rate:** 565 lbs/in, linear - **Tender spring rate:** 79 lbs/in front, 79 lbs/in rear - **Front lowering:** 15-35mm - **Rear lowering:** 15-35mm - **Finish:** Zinc-plated front, clear anodized rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 997 | 2006-2013 ### Notes - **BILSTEIN lists the kit for cars without PASM _(Porsche Active Suspension Management)_** - **For the same cars with PASM, BILSTEIN makes the [B16 DampTronic Coilovers for 997 Carrera 4 and Turbo](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-997-911-carrera-4-turbo-sport-49-349993/)** - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for 997 C4 and Turbo keep PASM?** No. BILSTEIN lists this Sport Version kit for all-wheel-drive 997 models without PASM, Porsche Active Suspension Management. For the same cars with PASM, BILSTEIN makes a B16 DampTronic Sport Version that connects to the factory system and keeps its modes. - **How much does the kit lower the 997 Carrera 4 and Turbo?** For the 997 Carrera 4 and Turbo, BILSTEIN quotes lowering of 15mm to 35mm front and rear compared with the factory ride height. The B16 PSS10 Coilovers for 997 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the 997 Carrera 4 and Turbo can run in practice. - **Is the B16 kit too firm for daily driving on the 997 Carrera 4 and Turbo?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the 997 Carrera 4 and Turbo, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most 997 Carrera 4 and Turbo owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 997 Carrera 4 and Turbo needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 997 Carrera 4 and Turbo before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the 997 Carrera 4 and Turbo goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera 4 and Turbo is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster [48-347785]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-986-porsche-boxster-48-347785/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster   German monotube coilovers with nine damping settings for the first-generation 986 Boxster and Boxster S." last_modified: "2026-11-13T20:16:39+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,900.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,900.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,699.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,699.00.</span>" sku: "48-347785" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860946641" brand: "Bilstein" part_number: "48-347785" map: "2699.0" cost: "2332.59" --- # BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster [48-347785] # BILSTEIN B16 PSS9 Coilovers for 986 Porsche Boxster BILSTEIN’s B16 PSS9 Coilovers for 986 Porsche Boxster fit the first-generation Boxster and Boxster S from 1997 to 2004, the 2004 S Special Edition included. The 986 is now an affordable way into a mid-engine Porsche, and many are on tired dampers; this kit gives them German monotube dampers, tenders at both ends and nine damping settings. ### Design and Performance - Linear springs at 257 lbs/in front and 371 lbs/in rear, each with a 114 lbs/in tender, are rated for 775kg front and 920kg rear. ### Features - 9-stage damping adjustment on every corner of the 986 Boxster, changing rebound and compression with each click - Threaded, zinc-coated damper bodies for setting ride height at each corner of the 986 Boxster - Springs and dampers tuned as a pair for the 986 Boxster, with linear spring rates and a blue finish - Helper springs that hold the 986 Boxster main springs in place as the wheel drops away from the body - Built in Germany, the B16 PSS9 Coilovers for 986 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 9 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 257 lbs/in, linear - **Rear spring rate:** 371 lbs/in, linear - **Tender spring rate:** 114 lbs/in front, 114 lbs/in rear - **Front lowering:** 15-35mm - **Rear lowering:** 10-30mm - **Maximum axle load:** 775kg front, 920kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche Boxster:** 986 _(including Roadster, Roadster S, S and S Special Edition)_ | 1997-2004 ### Notes - **For the 987 Boxster and Cayman, BILSTEIN makes the [B16 PSS9 Coilovers for 987](https://bulletproofautomotive.com/product/bilstein-b16-pss9-coilovers-for-987-boxster-cayman-without-pasm-48-347723/)** - **The images show a representative BILSTEIN B16 PSS9 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS9 Coilovers for 986 fit the Boxster S?** Yes. BILSTEIN lists the 2000 to 2003 Boxster S and the 2004 S and S Special Edition along with the base Boxster from 1997 to 2004. The later 987 Boxster uses different parts and takes a separate BILSTEIN kit. Confirm the model year of the car before ordering. - **How much lower will the 986 Boxster sit?** For the 986 Boxster, BILSTEIN quotes lowering of 15mm to 35mm at the front and 10mm to 30mm at the rear compared with the factory ride height. On the 986 Boxster, the threaded bodies set the exact height inside that range. The B16 PSS9 Coilovers for 986 are rated for axle loads up to 775kg front and 920kg rear. - **How does the B16 PSS9 kit differ from a fixed-damping kit?** A fixed-damping kit such as BILSTEIN B14 has one valving setting for the 986 Boxster. The B16 PSS9 kit adds a 9-position adjuster on each damper, so an owner of the 986 Boxster can soften the car for daily use and firm it up for a track day or a fast mountain road without changing any parts. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 986 Boxster needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 986 Boxster before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS9 kit with its Limited 5-Year Warranty, and any claim for the 986 Boxster goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 986 Boxster is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [49-304619]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-g29-bmw-z4-a90-toyota-gr-supra-49-304619/" lang: "en-US" type: "product" description: "BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra   Lower the adaptive-damper Z4 and GR Supra without losing Sport mode, with plug-and-play BILSTEIN EVO SE dampers." last_modified: "2026-11-13T20:20:38+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,824.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,824.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,399.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,399.00.</span>" sku: "49-304619" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860906874" brand: "Bilstein" part_number: "49-304619" map: "3399.0" cost: "2782.75" --- # BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [49-304619] # BILSTEIN EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra BILSTEIN’s EVO SE Plug and Play Coilovers for G29 BMW Z4 and A90 Toyota GR Supra are for the cars of that pair built with adaptive dampers, from the 2019 Z4 and the 2020 GR Supra to the 2026 models BILSTEIN lists. The dampers connect to the factory control unit, so Sport mode still firms them up, while threaded bodies lower the car 20mm to 35mm at the front. ### Design and Performance - Progressive springs at 403 lbs/in front and 728 lbs/in rear are rated for 870kg front and 1,000kg rear. ### Features - Electronic damping control through the factory system of the Z4 and GR Supra, connected at the original plugs - Height-adjustable twintube and monotube dampers with threaded bodies for setting the stance of the Z4 and GR Supra - Progressive springs in black, rated by BILSTEIN for the weight on each axle of the Z4 and GR Supra - The EVO SE Plug and Play Coilovers are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory adaptive system - **Damper design:** Twintube and monotube - **Front spring rate:** 403 lbs/in, progressive - **Rear spring rate:** 728 lbs/in, progressive - **Front lowering:** 20-35mm - **Rear lowering:** 10-35mm - **Maximum axle load:** 870kg front, 1,000kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW Z4:** G29 | 2019-2026 - **Toyota GR Supra:** A90 | 2020-2026 ### Notes - **BILSTEIN lists the kit for cars with electronic suspension _(adaptive dampers)_** - **For cars without adaptive dampers, BILSTEIN makes the [EVO T1 Coilovers for G29 Z4 and A90 GR Supra](https://bulletproofautomotive.com/product/bilstein-evo-t1-coilovers-for-g29-bmw-z4-and-a90-toyota-gr-supra-48-304498/)** - **The images show a representative BILSTEIN EVO SE kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO SE Plug and Play Coilovers for G29 and A90 need a canceller kit?** No. The EVO SE kit is designed for Z4 and GR Supra models with adaptive dampers and connects to the factory damping control, so no canceller is needed. The canceller kit applies only when a manual-adjust kit such as EVO T1 is fitted to a car with adaptive dampers. - **How much lower will the G29 Z4 and A90 GR Supra sit?** For the G29 Z4 and A90 GR Supra, BILSTEIN quotes lowering of 20mm to 35mm at the front and 10mm to 35mm at the rear compared with the factory ride height. On the Z4 and GR Supra, the threaded bodies set the exact height inside that range. The EVO SE Plug and Play Coilovers are rated for axle loads up to 870kg front and 1,000kg rear. - **Is any coding needed after installation?** BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control of the G29 Z4 and A90 GR Supra. The dampers connect at the factory plugs and the Z4 and GR Supra keeps running its own electronic damping, so the job is mechanical, followed by a wheel alignment. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G29 Z4 and A90 GR Supra needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Z4 and GR Supra before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO SE kit with its Limited 5-Year Warranty, and any claim for the G29 Z4 and A90 GR Supra goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Z4 and GR Supra is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM [48-347723]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss9-coilovers-for-987-boxster-cayman-without-pasm-48-347723/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM   Nine damping settings and a 25mm to 45mm drop for the 987 Boxster and Cayman built without PASM." last_modified: "2026-11-13T20:16:35+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,856.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,856.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,669.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,669.00.</span>" sku: "48-347723" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860937335" brand: "Bilstein" part_number: "48-347723" map: "2669.0" cost: "2305.43" --- # BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM [48-347723] # BILSTEIN B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM BILSTEIN’s B16 PSS9 Coilovers for 987 Porsche Boxster and Cayman without PASM fit the 2005 to 2012 Boxster and the 2006 to 2012 Cayman, the Boxster Spyder and Cayman R included. The 987 is one of the finest-handling mid-engine cars of its era, and this kit adds a 25mm to 45mm drop and nine damping settings per corner. ### Design and Performance - A 289 lbs/in linear front spring with a 114 lbs/in tender works with a 371 lbs/in progressive rear, rated for 775kg front and 940kg rear. ### Features - A 9-position adjuster on each 987 Boxster and Cayman damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the 987 Boxster and Cayman ride height and guards against corrosion - Linear front and progressive rear springs finished in blue, with rates matched to the front and rear axle loads of the 987 Boxster and Cayman - Helper springs that hold the 987 Boxster and Cayman main springs in place as the wheel drops away from the body - BILSTEIN Limited 5-Year Warranty, with the B16 PSS9 Coilovers for 987 made in Germany ### Specifications - **Damping adjustment:** 9 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 289 lbs/in, linear - **Rear spring rate:** 371 lbs/in, progressive - **Front tender spring rate:** 114 lbs/in - **Front lowering:** 25-45mm - **Rear lowering:** 25-45mm - **Maximum axle load:** 775kg front, 940kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche Boxster:** 987 | 2005-2012 - **Porsche Cayman:** 987C | 2006-2012 ### Notes - **BILSTEIN lists the kit for cars without PASM _(Porsche Active Suspension Management)_** - **For PASM cars, BILSTEIN makes the [B16 DampTronic Coilovers for 987](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-987-porsche-boxster-cayman-pasm-49-349986/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS9 Coilovers for 987 fit cars with PASM?** No. BILSTEIN lists this kit for 987 Boxster and Cayman models without PASM, Porsche Active Suspension Management. For PASM cars, BILSTEIN makes a B16 DampTronic kit that connects to the factory system and keeps its modes. A look at the build sheet settles it before ordering. - **How much does the kit lower the 987 Boxster and Cayman?** For the 987 Boxster and Cayman, BILSTEIN quotes lowering of 25mm to 45mm front and rear compared with the factory ride height. On the 987 Boxster and Cayman, the threaded bodies set the exact height inside that range. The B16 PSS9 Coilovers for 987 are rated for axle loads up to 775kg front and 940kg rear. - **Is the kit too firm for daily driving on the 987 Boxster and Cayman?** Not on the softer settings. BILSTEIN sets the 9-stage range for the 987 Boxster and Cayman, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited driving. Many 987 Boxster and Cayman owners leave it on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 987 Boxster and Cayman needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 987 Boxster and Cayman before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS9 kit with its Limited 5-Year Warranty, and any claim for the 987 Boxster and Cayman goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 987 Boxster and Cayman is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra [89-312780]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-g20-bmw-3-series-g22-g29-z4-a90-gr-supra-89-312780/" lang: "en-US" type: "product" description: "BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra   Hand-built 2-way adjustable BILSTEIN race coilovers for the G20, G22, G42, Z4 and GR Supra." last_modified: "2026-11-13T20:20:50+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>7,186.21</bdi></span></del> <span class="screen-reader-text">Original price was: $7,186.21.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>6,199.00</bdi></span></ins><span class="screen-reader-text">Current price is: $6,199.00.</span>" sku: "89-312780" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860864945" brand: "Bilstein" part_number: "89-312780" map: "6199.0" cost: "5954.83" --- # BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra [89-312780] # BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra BILSTEIN’s EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra are BILSTEIN’s motorsport kit for the current BMW rear-drive and xDrive platform, including the G42 230i and the M340i and M440i. Hand built in Germany, each damper has independent rebound and compression adjustment, and the threaded bodies allow up to 70mm of lowering. ### Design and Performance - EVO R uses red springs on grey monotube dampers. BILSTEIN backs it with a Limited 90-Day Warranty, consistent with a kit built for track use rather than daily driving. ### Features - 2-way adjustable dampers for the G20 3 Series, with independent rebound and compression control and 100 combinations - Height-adjustable monotube dampers with threaded bodies for setting the stance of the G20 3 Series - N/A springs finished in red, with rates matched to the front and rear axle loads of the G20 3 Series - BILSTEIN Limited 90-Day Warranty, with the EVO R Coilovers for G20 made in Germany ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube - **Front lowering:** 30-70mm or 10-30mm or 30-50mm, by model - **Rear lowering:** 20-70mm or 20-60mm or 10-30mm or 30-50mm, by model - **Finish:** Grey dampers, red springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **BMW 2 Series:** G42 | 2022-2024 - **BMW 3 Series:** G20 | 2019-2024 - **BMW 4 Series:** G22 | 2020-2025 - **BMW Z4:** G29 | 2020-2026 - **Toyota GR Supra:** A90 | 2020-2026 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For road use, see the [EVO T1 Coilovers for G20](https://bulletproofautomotive.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-3-series-and-g22-4-series-48-300162/) and the [EVO S Coilovers for G20](https://bulletproofautomotive.com/product/bilstein-evo-s-coilovers-for-g20-bmw-3-series-and-g22-4-series-47-300118/)** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Are the BILSTEIN EVO R Coilovers for G20 cars meant for the street?** EVO R is the BILSTEIN motorsport line, built for track and competition use with 2-way adjustable dampers and a Limited 90-Day Warranty. For a road car, the EVO S, EVO T1 or EVO SE kits for the G20 and G22 are better suited, and Bulletproof Automotive stocks those too. - **How much does the kit lower the G20, G22, G42, G29 and A90?** BILSTEIN quotes up to 70mm of lowering at the front on the 2, 3 and 4 Series, with 20mm to 70mm at the rear on rear-drive cars and 20mm to 60mm on xDrive cars, 10mm to 30mm on the Z4 and 30mm to 50mm on the GR Supra. The EVO R Coilovers for G20 cars set height on threaded bodies. - **What are the EVO R adjusters for?** EVO R dampers for the G20, G22, G42, G29 and A90 have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the G20 3 Series for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G20, G22, G42, G29 and A90 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the G20, G22, G42, G29 and A90 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM [46-258946]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-981-porsche-cayman-with-pasm-46-258946/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM   A subtle, fixed drop for the PASM-equipped 981 Cayman, S and GTS, on matched BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:18:19+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,768.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,768.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,299.00.</span>" sku: "46-258946" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860789392" brand: "Bilstein" part_number: "46-258946" map: "2299.0" cost: "1990.65" --- # BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM [46-258946] # BILSTEIN B12 Pro-Kit for 981 Porsche Cayman with PASM BILSTEIN’s B12 Pro-Kit for 981 Porsche Cayman with PASM fits the 2014 to 2016 Cayman, Cayman S, GTS and Black Edition on Porsche Active Suspension Management. BILSTEIN dampers and Eibach Pro-Kit springs lower the nose 20mm and the tail 10mm, a modest change that tidies the stance of a car whose handling needs little help. ### Design and Performance - Twintube BILSTEIN dampers carry valving made for the Eibach springs, rated for 785kg front and 945kg rear. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 981 Cayman - Valving set by BILSTEIN to control the lower spring, so the 981 Cayman is not left underdamped - Fixed ride height on the 981 Cayman, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for 981 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Twintube - **Front lowering:** 20mm - **Rear lowering:** 10mm - **Maximum axle load:** 785kg front, 945kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche Cayman:** 981C _(including S, GTS and Black Edition)_ | 2014-2016 ### Notes - **BILSTEIN lists this kit for cars with PASM _(Porsche Active Suspension Management)_** - **This is a fixed-height kit; ride height and damping are not adjustable** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 981 fit the Boxster?** No. BILSTEIN lists this kit for the 981 Cayman, Cayman S, GTS and Black Edition from 2014 to 2016, with PASM. The 981 Boxster is not on the list for this kit. For a Boxster or a 718, Bulletproof Automotive can check other BILSTEIN options. - **How much does the kit lower the 981 Cayman?** For the 981 Cayman, BILSTEIN quotes lowering of 20mm at the front and 10mm at the rear compared with the factory ride height. The springs set that height on the 981 Cayman, so it stays fixed once installed. The B12 Pro-Kit for 981 is rated for axle loads up to 785kg front and 945kg rear. - **Why replace the dampers when lowering the 981 Cayman?** The factory dampers on the 981 Cayman are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 981 Cayman underdamped and shorten damper life. In this kit the damper valving is matched to the Eibach spring, so the 981 Cayman keeps its composure at the lower height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the 981 Cayman needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 981 Cayman is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 981 Cayman goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 981 Cayman is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series [48-313063]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-t2-coilovers-for-g20-bmw-3-series-and-g22-4-series-48-313063/" lang: "en-US" type: "product" description: "BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series   Two-way adjustable BILSTEIN EVO dampers for the rear-drive G20 and G22 that sees regular track days." last_modified: "2026-11-13T20:21:15+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,475.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,475.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,089.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,089.00.</span>" sku: "48-313063" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860885995" brand: "Bilstein" part_number: "48-313063" map: "3089.0" cost: "2530.59" --- # BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series [48-313063] # BILSTEIN EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series BILSTEIN’s EVO T2 Coilovers for G20 BMW 3 Series and G22 4 Series sit between the EVO T1 and the motorsport EVO R, for the rear-drive 330i, 430i and M340i. Each damper has separate rebound and compression adjusters, 100 combinations in all, so an owner who tracks the car regularly can tune it properly while keeping it usable on the road. ### Design and Performance - Progressive springs at 411.13 lbs/in front and 728 lbs/in rear sit on threaded EVO bodies, with up to 60mm of front and 70mm of rear lowering on the 430i. ### Features - 2-way adjustable dampers for the G20 3 Series, with independent rebound and compression control and 100 combinations - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 3 Series - Springs and dampers tuned as a pair for the G20 3 Series, with progressive spring rates and a black finish - Built in Germany, the EVO T2 Coilovers for G20 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube and twintube - **Front spring rate:** 411.13 lbs/in, progressive - **Rear spring rate:** 728 lbs/in, progressive - **Front lowering:** 35-50mm or 35-60mm or 30-35mm, by model - **Rear lowering:** 30-55mm or 30-70mm or 30-50mm, by model - **Maximum axle load:** 1,075kg front, 1,210kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330i 2019-2021, M340i 2020-2022)_ | 2019-2022 - **BMW 4 Series:** G22 _(430i 2021)_ | 2021 ### Notes - **The images show a representative BILSTEIN EVO coilover kit; the EVO T2 has 2-way adjusters, and mounts, brackets and springs differ by vehicle** - **BILSTEIN lists the kit for cars without electronic suspension** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **How are the BILSTEIN EVO T2 Coilovers for G20 cars different from EVO T1?** EVO T1 has a 10-stage adjuster that moves rebound and compression together. The EVO T2 Coilovers for G20 cars adjust rebound and compression separately, 100 combinations, which lets a driver tune the car more precisely for a circuit. Both are built for road use with occasional track days. - **How much does the kit lower the rear-drive G20 and G22?** BILSTEIN quotes 35mm to 50mm of lowering at the front and 30mm to 55mm at the rear on the 330i, 35mm to 60mm and 30mm to 70mm on the 430i, and 30mm to 35mm and 30mm to 50mm on the M340i. The threaded bodies set the exact height inside each range. - **Which G20 and G22 models does the kit fit?** BILSTEIN lists the 2019 to 2021 330i, the 2021 430i and the 2020 to 2022 M340i, all rear-drive and without electronic suspension. xDrive cars and later model years are not on the list for this EVO T2 kit, so check the car before ordering. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO T2 kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S [48-347754]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-4-and-4s-48-347754/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S   Ten clicks of BILSTEIN damping and linear springs for the all-wheel-drive 996 Carrera 4 and the wide-body Carrera 4S." last_modified: "2026-11-14T02:52:17+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,767.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,767.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,299.00.</span>" sku: "48-347754" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860946689" brand: "Bilstein" part_number: "48-347754" map: "3299.0" cost: "2841.31" --- # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S [48-347754] # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S BILSTEIN’s B16 PSS10 Coilovers for 996 Porsche 911 Carrera 4 and 4S fit the all-wheel-drive Carrera 4 from 1999 to 2004 and the wide-body Carrera 4S from 2002 to 2005. The kit fits BILSTEIN monotube dampers in threaded, zinc-plated bodies with linear springs, tender springs and a 10-click adjuster at each corner. For an owner who uses a C4S the way Porsche intended, year-round and quickly, it restores and then improves on the original control. ### Features - 10 damping settings per corner of the 996 Carrera 4, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the 996 Carrera 4 ride height is set on the car and the bodies resist road salt - Linear springs in blue, rated by BILSTEIN for the weight on each axle of the 996 Carrera 4 - Helper springs that hold the 996 Carrera 4 main springs in place as the wheel drops away from the body - The B16 PSS10 Coilovers for 996 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 257 lbs/in, linear - **Rear spring rate:** 514 lbs/in, linear - **Tender spring rate:** 114 lbs/in front, 79 lbs/in rear - **Front lowering:** 5-35mm - **Rear lowering:** 25-30mm - **Maximum axle load:** 750kg front, 1,180kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 996 _(including Carrera 4 and Carrera 4S)_ | 1999-2005 ### Notes - **For the rear-drive 996 Carrera, BILSTEIN makes the [B16 PSS10 Coilovers for 996 Carrera](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-48-347730/)** - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for 996 Carrera 4 fit the Carrera 4S?** Yes. BILSTEIN lists the 2002 to 2005 Carrera 4S alongside the 1999 to 2004 Carrera 4. The rear-drive 996 Carrera and the 996 Turbo use their own BILSTEIN B16 kits, built for different weights and lowering ranges, so confirm the model and year before ordering. - **What ride height range does the kit give the 996 Carrera 4?** For the 996 Carrera 4, BILSTEIN quotes lowering of 5mm to 35mm at the front and 25mm to 30mm at the rear compared with the factory ride height. On the 996 Carrera 4, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for 996 are rated for axle loads up to 750kg front and 1,180kg rear. - **What does the 10-stage adjuster change on the 996 Carrera 4?** On the 996 Carrera 4, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the 996 Carrera 4, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 996 Carrera 4 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 996 Carrera 4 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the 996 Carrera 4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 996 Carrera 4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R [89-313022]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-8v-audi-a3-s3-rs3-mk7-gti-golf-r-89-313022/" lang: "en-US" type: "product" description: "BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R   Hand-built, 2-way adjustable BILSTEIN race coilovers for the MQB A3, S3, RS3, GTI and Golf R." last_modified: "2026-11-13T20:21:02+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,794.61</bdi></span></del> <span class="screen-reader-text">Original price was: $5,794.61.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,999.00</bdi></span></ins><span class="screen-reader-text">Current price is: $4,999.00.</span>" sku: "89-313022" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860877099" brand: "Bilstein" part_number: "89-313022" map: "4999.0" cost: "4808.81" --- # BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R [89-313022] # BILSTEIN EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R BILSTEIN’s EVO R Coilovers for 8V Audi A3 / S3 / RS3 and Mk7 Volkswagen GTI / Golf R bring BILSTEIN’s motorsport damper to the MQB cars that fill club racing and time-attack grids, with the Golf Alltrack also listed. Each damper is hand built in Germany with independent rebound and compression adjustment, and the kit allows 10mm to 30mm of front lowering. ### Features - 2-way adjustable dampers for the MQB car, with independent rebound and compression control and 100 combinations - Height-adjustable monotube dampers with threaded bodies for setting the stance of the MQB car - Springs and dampers tuned as a pair for the MQB car, with linear spring rates and a red finish - Helper springs that hold the MQB car main springs in place as the wheel drops away from the body - Built in Germany, the EVO R Coilovers for 8V are backed by the BILSTEIN Limited 90-Day Warranty ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube - **Front spring rate:** 571.17 lbs/in, linear - **Rear spring rate:** 456.38 lbs/in, linear - **Tender spring rate:** 57 lbs/in front, 11.19 lbs/in rear - **Front lowering:** 10-30mm - **Rear lowering:** 0-30mm - **Finish:** Grey dampers, red springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **Audi A3:** 8V | 2015-2020 - **Audi A3 Quattro:** 8V | 2015-2019 - **Audi RS3:** 8V | 2017-2020 - **Audi S3:** 8V | 2015-2020 - **Volkswagen GTI:** Mk7 | 2015-2022 - **Volkswagen Golf Alltrack:** Mk7 | 2017-2019 - **Volkswagen Golf R:** Mk7 | 2015-2019 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension, and specifies a 55mm outside strut diameter for many models** - **For a road car, BILSTEIN makes the [B16 PSS10 Coilovers for 8V and Mk7](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-8v-a3-s3-rs3-mk7-gti-golf-r-arteon-48-251570/)** - **The images show a representative BILSTEIN EVO R kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Are the BILSTEIN EVO R Coilovers for 8V cars a good choice for a daily driver?** No. EVO R is a motorsport kit with race spring rates and a Limited 90-Day Warranty. For a road car, the BILSTEIN B16 PSS10 kit for the same MQB models is the better choice, with a 10-click adjuster and a Limited 5-Year Warranty. - **How much lower will the MQB A3, GTI and Golf R sit?** For the MQB A3, GTI and Golf R, BILSTEIN quotes lowering of 10mm to 30mm at the front and 0mm to 30mm at the rear compared with the factory ride height. The EVO R Coilovers for 8V set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the MQB car can run in practice. - **What are the EVO R adjusters for?** EVO R dampers for the MQB A3, GTI and Golf R have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the MQB car for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the MQB A3, GTI and Golf R needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the MQB car before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the MQB A3, GTI and Golf R goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the MQB car is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive [48-326216]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-xdrive-48-326216/" lang: "en-US" type: "product" description: "BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive   The adjustable EVO T1 kit for the all-wheel-drive 330e, rated for its battery and xDrive weight." last_modified: "2026-11-13T20:20:16+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,704.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,704.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,404.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,404.00.</span>" sku: "48-326216" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860907161" brand: "Bilstein" part_number: "48-326216" map: "2404.0" cost: "1977.29" --- # BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive [48-326216] # BILSTEIN EVO T1 Coilovers for G20 BMW 330e xDrive BILSTEIN’s EVO T1 Coilovers for G20 BMW 330e xDrive fit the all-wheel-drive plug-in hybrid 3 Series from 2021 to 2024, on cars without adaptive dampers. A 10-click adjuster at each corner lets the driver trade comfort for control, and BILSTEIN rates the kit for 1,115kg front and 1,345kg rear to carry the battery and xDrive hardware. ### Design and Performance - Springs run 400 lbs/in progressive at the front and 800 lbs/in linear at the rear, with 25mm to 50mm of front lowering and 20mm to 55mm at the rear. ### Features - A 10-position adjuster on each G20 330e xDrive damper, firming or softening rebound and compression in one step - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 330e xDrive - Progressive front and linear rear springs finished in black, with rates matched to the front and rear axle loads of the G20 330e xDrive - BILSTEIN Limited 5-Year Warranty, with the EVO T1 Coilovers for G20 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 800 lbs/in, linear - **Front lowering:** 25-50mm - **Rear lowering:** 20-55mm - **Maximum axle load:** 1,115kg front, 1,345kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330e xDrive 2021-2024)_ | 2021-2024 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For the rear-drive 330e, BILSTEIN makes the [EVO T1 Coilovers for G20 330e](https://bulletproofautomotive.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-48-326209/)** - **The images show a representative BILSTEIN EVO T1 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Does the BILSTEIN EVO T1 Coilovers for G20 330e xDrive kit fit the rear-drive 330e?** No. This kit is for the 2021 to 2024 330e xDrive. The rear-drive 330e has different front hardware and takes its own EVO T1 kit, which Bulletproof Automotive also stocks. Check the badge on the trunk lid or the VIN before ordering. - **How much does the kit lower the G20 330e xDrive?** For the G20 330e xDrive, BILSTEIN quotes lowering of 25mm to 50mm at the front and 20mm to 55mm at the rear compared with the factory ride height. On the G20 330e xDrive, the threaded bodies set the exact height inside that range. The EVO T1 Coilovers for G20 are rated for axle loads up to 1,115kg front and 1,345kg rear. - **What is the difference between EVO T1 and EVO S?** For the G20 330e xDrive, both are height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping for road use, while EVO T1 adds a 10-stage adjuster that moves rebound and compression together, so the G20 330e xDrive can run softer on the street and firmer on track without changing parts. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G20 330e xDrive needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 330e xDrive before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO T1 kit with its Limited 5-Year Warranty, and any claim for the G20 330e xDrive goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 330e xDrive is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive [47-326163]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-xdrive-47-326163/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive   The EVO S street coilover for the all-wheel-drive 330e, rated for its battery and xDrive weight." last_modified: "2026-11-13T20:19:42+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,969.00</bdi></span></del> <span class="screen-reader-text">Original price was: $1,969.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,750.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,750.00.</span>" sku: "47-326163" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860906980" brand: "Bilstein" part_number: "47-326163" map: "1750.0" cost: "1449.82" --- # BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive [47-326163] # BILSTEIN EVO S Coilovers for G20 BMW 330e xDrive BILSTEIN’s EVO S Coilovers for G20 BMW 330e xDrive fit the all-wheel-drive plug-in hybrid 3 Series from 2021 to 2024, on cars without adaptive dampers. Battery weight and all-wheel-drive hardware make it one of the heavier G20 models, and BILSTEIN rates this kit for 1,115kg front and 1,345kg rear with a stiff linear rear spring. ### Design and Performance - Springs run 400 lbs/in progressive at the front and 800 lbs/in linear at the rear, on threaded grey EVO dampers with fixed valving. ### Features - Fixed damping valving chosen by BILSTEIN for the G20 330e xDrive, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 330e xDrive - Progressive front and linear rear springs in black, rated by BILSTEIN for the weight on each axle of the G20 330e xDrive - The EVO S Coilovers for G20 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 800 lbs/in, linear - **Front lowering:** 25-50mm - **Rear lowering:** 20-55mm - **Maximum axle load:** 1,115kg front, 1,345kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330e xDrive 2021-2024)_ | 2021-2024 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For the rear-drive 330e, BILSTEIN makes the [EVO S Coilovers for G20 330e](https://bulletproofautomotive.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-47-326170/)** - **The images show a representative BILSTEIN EVO S kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Does the BILSTEIN EVO S Coilovers for G20 330e xDrive kit fit the rear-drive 330e?** No. BILSTEIN lists this kit for the 2021 to 2024 330e xDrive. The rear-drive 330e uses different front hardware and takes its own EVO S kit, which Bulletproof Automotive also stocks. Check the badge on the trunk lid before ordering. - **How much does the kit lower the G20 330e xDrive?** For the G20 330e xDrive, BILSTEIN quotes lowering of 25mm to 50mm at the front and 20mm to 55mm at the rear compared with the factory ride height. On the G20 330e xDrive, the threaded bodies set the exact height inside that range. The EVO S Coilovers for G20 are rated for axle loads up to 1,115kg front and 1,345kg rear. - **What is the difference between EVO S and EVO T1?** For the G20 330e xDrive, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the G20 330e xDrive to the track. For a G20 330e xDrive that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G20 330e xDrive needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 330e xDrive before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the G20 330e xDrive goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 330e xDrive is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO T1 Coilovers for G20 BMW 330e [48-326209]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-48-326209/" lang: "en-US" type: "product" description: "BILSTEIN EVO T1 Coilovers for G20 BMW 330e   Ten damping settings and a stiff linear rear spring, built around the battery weight of the G20 330e." last_modified: "2026-11-13T20:20:12+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,704.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,704.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,404.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,404.00.</span>" sku: "48-326209" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "false" units_per_sku: "1" upc: "651860907185" brand: "Bilstein" part_number: "48-326209" map: "2404.0" cost: "1977.29" --- # BILSTEIN EVO T1 Coilovers for G20 BMW 330e [48-326209] # BILSTEIN EVO T1 Coilovers for G20 BMW 330e BILSTEIN’s EVO T1 Coilovers for G20 BMW 330e give the rear-drive plug-in hybrid 3 Series of 2021 to 2024 the adjustable EVO damper, with ten settings per corner. BILSTEIN rates the rear axle for 1,410kg and fits an 800 lbs/in linear rear spring to carry the battery, so the 330e can be lowered without sagging at the tail. ### Design and Performance - A 400 lbs/in progressive front spring works with the linear rear, and BILSTEIN quotes 35mm to 50mm of lowering at the front and 30mm to 55mm at the rear. ### Features - 10-stage damping adjustment on every corner of the G20 330e, changing rebound and compression with each click - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 330e - Springs and dampers tuned as a pair for the G20 330e, with progressive front and linear rear spring rates and a black finish - Built in Germany, the EVO T1 Coilovers for G20 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube and twintube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 800 lbs/in, linear - **Front lowering:** 35-50mm - **Rear lowering:** 30-55mm - **Maximum axle load:** 1,075kg front, 1,410kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330e 2021-2024)_ | 2021-2024 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For the 330e xDrive, BILSTEIN makes the [EVO T1 Coilovers for G20 330e xDrive](https://bulletproofautomotive.com/product/bilstein-evo-t1-coilovers-for-g20-bmw-330e-xdrive-48-326216/)** - **The images show a representative BILSTEIN EVO T1 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **How is the BILSTEIN EVO T1 Coilovers for G20 330e kit different from the 330i kit?** The 330e carries a battery over the rear axle, so BILSTEIN fits a stiffer 800 lbs/in linear rear spring and rates the rear axle for 1,410kg. The 330i kit uses a 756 lbs/in progressive rear spring. The 10-stage adjuster and threaded bodies are the same on both. - **How much lower will the G20 330e sit?** For the G20 330e, BILSTEIN quotes lowering of 35mm to 50mm at the front and 30mm to 55mm at the rear compared with the factory ride height. On the G20 330e, the threaded bodies set the exact height inside that range. The EVO T1 Coilovers for G20 are rated for axle loads up to 1,075kg front and 1,410kg rear. - **What is the difference between EVO T1 and EVO S?** For the G20 330e, both are height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping for road use, while EVO T1 adds a 10-stage adjuster that moves rebound and compression together, so the G20 330e can run softer on the street and firmer on track without changing parts. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G20 330e needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 330e before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO T1 kit with its Limited 5-Year Warranty, and any claim for the G20 330e goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 330e is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo [48-347747]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-turbo-48-347747/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo   Ten damping settings, linear springs and a 25mm to 35mm front drop for the all-wheel-drive 996 Turbo and Turbo S." last_modified: "2026-11-13T20:12:19+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,767.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,767.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,299.00.</span>" sku: "48-347747" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860946627" brand: "Bilstein" part_number: "48-347747" map: "3299.0" cost: "2841.31" --- # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo [48-347747] # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Turbo BILSTEIN’s B16 PSS10 Coilovers for 996 Porsche 911 Turbo fit the 2001 to 2005 Turbo and the 2005 Turbo S, the all-wheel-drive car that made 911 Turbo performance usable every day. The kit replaces the factory dampers with BILSTEIN monotube units in threaded, zinc-plated bodies, linear springs with tenders, and a 10-click adjuster per corner. A clean 996 Turbo remains one of the great performance bargains, and this is how to make one handle like a modern car. ### Design and Performance - The front springs run 257 lbs/in and the rears 514 lbs/in, both linear, with tender springs to keep them seated. BILSTEIN rates the kit for the weight of the Turbo, up to 825kg on the front axle and 1,250kg on the rear. ### Features - A 10-position adjuster on each 996 Turbo damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the 996 Turbo ride height and guards against corrosion - Linear springs finished in blue, with rates matched to the front and rear axle loads of the 996 Turbo - Helper springs that hold the 996 Turbo main springs in place as the wheel drops away from the body - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for 996 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 257 lbs/in, linear - **Rear spring rate:** 514 lbs/in, linear - **Tender spring rate:** 114 lbs/in front, 79 lbs/in rear - **Front lowering:** 25-35mm - **Rear lowering:** 15-20mm - **Maximum axle load:** 825kg front, 1,250kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 996 _(including Turbo and Turbo S)_ | 2001-2005 ### Notes - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **For the 996 Carrera 4 and 4S, BILSTEIN makes the [B16 PSS10 Coilovers for 996 Carrera 4](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-4-and-4s-48-347754/)** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for 996 fit the Turbo S?** Yes. BILSTEIN lists the 2005 Turbo S alongside the 2001 to 2005 911 Turbo. The 996 Carrera, Carrera 4 and Carrera 4S use different BILSTEIN B16 kits with their own lowering ranges and axle-load ratings, which Bulletproof Automotive also stocks. - **How much does the kit lower the 996 Turbo?** For the 996 Turbo, BILSTEIN quotes lowering of 25mm to 35mm at the front and 15mm to 20mm at the rear compared with the factory ride height. On the 996 Turbo, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for 996 are rated for axle loads up to 825kg front and 1,250kg rear. - **Is the B16 kit too firm for daily driving on the 996 Turbo?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the 996 Turbo, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most 996 Turbo owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 996 Turbo needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 996 Turbo before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the 996 Turbo goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 996 Turbo is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman [48-347792]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-981-and-718-porsche-boxster-cayman-48-347792/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman   One BILSTEIN kit for the 981 and 718 Boxster and Cayman: ten damping settings, progressive springs and a 10mm to 30mm drop." last_modified: "2026-11-13T20:12:32+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,001.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,001.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,769.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,769.00.</span>" sku: "48-347792" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" carb_acknowledgement_required: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" regular_stock: "t" units_per_sku: "1" upc: "651860946665" brand: "Bilstein" part_number: "48-347792" map: "2769.0" cost: "2390.65" --- # BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman [48-347792] # BILSTEIN B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman BILSTEIN’s B16 PSS10 Coilovers for 981 and 718 Porsche Boxster and Cayman cover more cars than the distributor title suggests: the 981 Boxster from 2013, the 981 Cayman from 2014 and the 718 Boxster and Cayman through 2025. The mid-engine chassis is already balanced; this kit lets the owner set the ride height and choose from ten damping settings. ### Features - A 10-position adjuster on each 981 and 718 damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the 981 and 718 ride height and guards against corrosion - Progressive springs finished in blue, with rates matched to the front and rear axle loads of the 981 and 718 - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for 981 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 285 lbs/in, progressive - **Rear spring rate:** 371 lbs/in, progressive - **Front lowering:** 10-30mm - **Rear lowering:** 10-30mm - **Maximum axle load:** 785kg front, 930kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 718 Boxster:** 982 | 2017-2025 - **Porsche 718 Cayman:** 982C | 2017-2025 - **Porsche Boxster:** 981 | 2013-2016 - **Porsche Cayman:** 981C | 2014-2016 ### Notes - **BILSTEIN lists the kit for cars without PASM _(Porsche Active Suspension Management)_, and lists some models, such as the 718 Cayman GT4, under that condition as well** - **For cars with PASM, BILSTEIN makes the [B16 DampTronic Coilovers for 981 and 718](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-981-718-boxster-cayman-pasm-49-350234/)** - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for 981 cars work with PASM?** No. BILSTEIN lists the kit for 981 and 718 Boxster and Cayman models without PASM, Porsche Active Suspension Management. Cars with PASM keep their electronic damping with the B16 DampTronic kit, which BILSTEIN makes for the same models and Bulletproof Automotive also stocks. - **How much does the kit lower the 981 or 718 Boxster and Cayman?** For the 981 or 718 Boxster and Cayman, BILSTEIN quotes lowering of 10mm to 30mm front and rear compared with the factory ride height. On the 981 and 718, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for 981 are rated for axle loads up to 785kg front and 930kg rear. - **Is the B16 kit too firm for daily driving on the 981 or 718 Boxster and Cayman?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the 981 or 718 Boxster and Cayman, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most 981 and 718 owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 981 or 718 Boxster and Cayman needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 981 and 718 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the 981 or 718 Boxster and Cayman goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 981 and 718 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera [48-347730]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-48-347730/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera   For the rear-drive 996 Carrera and Targa: a 15mm to 35mm drop at the front and ten damping settings at every corner." last_modified: "2026-11-13T20:12:24+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,767.00</bdi></span></del> <span class="screen-reader-text">Original price was: $4,767.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,299.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,299.00.</span>" sku: "48-347730" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860946566" brand: "Bilstein" part_number: "48-347730" map: "3299.0" cost: "2840.89" --- # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera [48-347730] # BILSTEIN B16 PSS10 Coilovers for 996 Porsche 911 Carrera BILSTEIN’s B16 PSS10 Coilovers for 996 Porsche 911 Carrera fit the rear-drive 1999 to 2005 Carrera, the 2002 Targa and the 2004 40th Anniversary Edition. The 996 was the first water-cooled 911, and many now run on tired original dampers that hide how good the chassis is. This kit fits BILSTEIN monotube dampers in threaded bodies, linear springs and a 10-click adjuster at each corner, giving back the precision these cars had when new and then some. ### Features - 10 damping settings per corner of the 996 Carrera, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the 996 Carrera ride height is set on the car and the bodies resist road salt - Linear springs in blue, rated by BILSTEIN for the weight on each axle of the 996 Carrera - Helper springs that hold the 996 Carrera main springs in place as the wheel drops away from the body - The B16 PSS10 Coilovers for 996 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 257 lbs/in, linear - **Rear spring rate:** 514 lbs/in, linear - **Tender spring rate:** 114 lbs/in front, 79 lbs/in rear - **Front lowering:** 15-35mm - **Rear lowering:** 10-30mm - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Porsche 911:** 996 _(including Carrera, Targa and 40th Anniversary Edition)_ | 1999-2005 ### Notes - **For the 996 Carrera 4 and 4S, BILSTEIN makes the [B16 PSS10 Coilovers for 996 Carrera 4](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-carrera-4-and-4s-48-347754/); for the Turbo, the [B16 PSS10 Coilovers for 996 Turbo](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-996-porsche-911-turbo-48-347747/)** - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for 996 Carrera fit the Carrera 4?** No. BILSTEIN lists this kit for the rear-drive 996 Carrera, the 2002 Targa and the 2004 40th Anniversary Edition. The all-wheel-drive Carrera 4 and 4S and the Turbo have their own BILSTEIN B16 kits, built for their different weight and lowering ranges. - **What ride height range does the kit give the 996 Carrera?** For the 996 Carrera, BILSTEIN quotes lowering of 15mm to 35mm at the front and 10mm to 30mm at the rear compared with the factory ride height. The B16 PSS10 Coilovers for 996 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the 996 Carrera can run in practice. - **What does the 10-stage adjuster change on the 996 Carrera?** On the 996 Carrera, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the 996 Carrera, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the 996 Carrera needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the 996 Carrera before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the 996 Carrera goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 996 Carrera is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO R Coilovers for E36 BMW 3 Series [89-317594]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-e36-bmw-3-series-89-317594/" lang: "en-US" type: "product" description: "BILSTEIN EVO R Coilovers for E36 BMW 3 Series   Hand-built, 2-way adjustable BILSTEIN motorsport coilovers for the E36 race or time-attack car." last_modified: "2026-11-13T22:03:21+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,868.57</bdi></span></del> <span class="screen-reader-text">Original price was: $4,868.57.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>4,200.00</bdi></span></ins><span class="screen-reader-text">Current price is: $4,200.00.</span>" sku: "89-317594" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860878317" brand: "Bilstein" part_number: "89-317594" map: "4200.0" cost: "4046.18" --- # BILSTEIN EVO R Coilovers for E36 BMW 3 Series [89-317594] # BILSTEIN EVO R Coilovers for E36 BMW 3 Series BILSTEIN’s EVO R Coilovers for E36 BMW 3 Series are a motorsport kit for one of the most raced chassis in club competition, covering the 318i to 328is of 1992 to 1999. Each monotube damper is hand built in Germany with separate rebound and compression adjusters, 100 settings in all, and the springs are stiff linear race rates. This is a race car suspension, not a road upgrade. ### Design and Performance - Linear main springs at 800 lbs/in front and 1,027 lbs/in rear, with 57 lbs/in and 114 lbs/in tenders, are race rates for slick tires and smooth circuits. BILSTEIN backs EVO R with a Limited 90-Day Warranty, reflecting its competition use. ### Features - 2-way adjustable dampers for the E36 3 Series, with independent rebound and compression control and 100 combinations - Height-adjustable monotube dampers with threaded bodies for setting the stance of the E36 3 Series - Springs and dampers tuned as a pair for the E36 3 Series, with linear spring rates and a red finish - Helper springs that hold the E36 3 Series main springs in place as the wheel drops away from the body - Built in Germany, the EVO R Coilovers for E36 are backed by the BILSTEIN Limited 90-Day Warranty ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube - **Front spring rate:** 800 lbs/in, linear - **Rear spring rate:** 1027 lbs/in, linear - **Tender spring rate:** 57 lbs/in front, 114 lbs/in rear - **Finish:** Grey dampers, red springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **BMW 3 Series:** E36 _(including 318i, 318is, 323i, 323is, 325i, 325is, 328i and 328is)_ | 1992-1999 ### Notes - **BILSTEIN states that its [B1 Front Strut Mount](https://bulletproofautomotive.com/product/bilstein-b1-front-strut-mount-for-e36-bmw-3-series-z3-e85-z4-12-116829/) must be used with this kit; it is sold separately, two per car** - **BILSTEIN lists some 325i and 325is models from a June 1992 production date** - **BILSTEIN does not publish lowering figures for this application** - **For a road-focused kit, BILSTEIN makes the [B16 PSS9 Coilovers for E36 3 Series](https://bulletproofautomotive.com/product/bilstein-b16-pss9-coilovers-for-e36-bmw-3-series-48-080347/)** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO R Coilovers for E36 need any additional parts?** Yes. BILSTEIN states that strut mount 12-116829 must be used with this kit, and it is sold separately. Some 325i and 325is cars are listed from a June 1992 production date. Bulletproof Automotive can confirm the parts list for a specific car before the order ships. - **What are the EVO R adjusters for?** EVO R dampers for the E36 3 Series have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the E36 3 Series for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application. - **Are the EVO R Coilovers for E36 suitable for road use?** They are built for motorsport. The EVO R Coilovers for E36 cars use race spring rates of 800 lbs/in front and 1,027 lbs/in rear and carry a Limited 90-Day Warranty. For a road car, the BILSTEIN B16 PSS9 kit for the E36 is the better fit. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the E36 3 Series needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the E36 3 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the E36 3 Series goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the E36 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe [89-310458]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-r-coilovers-for-x290-mercedes-amg-gt-4-door-coupe-89-310458/" lang: "en-US" type: "product" description: "BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe   Hand-built 2-way adjustable BILSTEIN race coilovers for the X290 AMG GT 4-Door Coupe, aimed at track use." last_modified: "2026-11-13T20:20:55+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,969.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,969.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,149.00</bdi></span></ins><span class="screen-reader-text">Current price is: $5,149.00.</span>" sku: "89-310458" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860864952" brand: "Bilstein" part_number: "89-310458" map: "5149.0" cost: "4952.48" --- # BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe [89-310458] # BILSTEIN EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe BILSTEIN’s EVO R Coilovers for X290 Mercedes-AMG GT 4-Door Coupe fit the GT 43, GT 53, GT 63 and GT 63 S four-door from 2019 to 2023, on cars without electronic suspension. EVO R is BILSTEIN’s motorsport coilover, hand built in Germany with 2-way adjustable dampers and stiff linear springs, and on a car this heavy and powerful it is aimed squarely at the track. ### Design and Performance - Linear springs at 913.88 lbs/in front and 913 lbs/in rear, with 171 lbs/in tenders, are rates for a heavy car on a circuit. The drop is small, 0mm to 20mm at each end. ### Features - 2-way adjustable dampers for the AMG GT 4-Door, with independent rebound and compression control and 100 combinations - Height-adjustable monotube dampers with threaded bodies for setting the stance of the AMG GT 4-Door - Linear springs finished in red, with rates matched to the front and rear axle loads of the AMG GT 4-Door - Helper springs that hold the AMG GT 4-Door main springs in place as the wheel drops away from the body - BILSTEIN Limited 90-Day Warranty, with the EVO R Coilovers for X290 made in Germany ### Specifications - **Damping adjustment:** 2-way, independent rebound and compression, 100 combinations - **Damper design:** Monotube - **Front spring rate:** 913.88 lbs/in, linear - **Rear spring rate:** 913 lbs/in, linear - **Tender spring rate:** 171 lbs/in front, 171 lbs/in rear - **Front lowering:** 0-20mm - **Rear lowering:** 0-20mm - **Finish:** Grey dampers, red springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 90-Day Warranty ### Applications - **Mercedes-AMG GT 43:** X290 | 2021-2023 - **Mercedes-AMG GT 53:** X290 | 2019-2023 - **Mercedes-AMG GT 63:** X290 | 2019-2021 and 2023 - **Mercedes-AMG GT 63 S:** X290 | 2019-2021 and 2023 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **This is a motorsport kit; BILSTEIN covers EVO R with a Limited 90-Day Warranty** - **The images show a representative BILSTEIN EVO R kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO R Coilovers for X290 fit cars with air suspension?** No. BILSTEIN lists the kit for AMG GT 4-Door Coupe models without electronic suspension. Many of these cars left the factory on AMG RIDE CONTROL air suspension, so confirm the suspension type before ordering. EVO R is a motorsport kit with a Limited 90-Day Warranty. - **How much does the kit lower the AMG GT 4-Door Coupe?** For the AMG GT 4-Door Coupe, BILSTEIN quotes lowering of 0mm to 20mm front and rear compared with the factory ride height. The EVO R Coilovers for X290 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the AMG GT 4-Door can run in practice. - **What are the EVO R adjusters for?** EVO R dampers for the AMG GT 4-Door Coupe have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the AMG GT 4-Door for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the AMG GT 4-Door Coupe needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the AMG GT 4-Door before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the AMG GT 4-Door Coupe goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the AMG GT 4-Door is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM [46-258885]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-with-pasm-46-258885/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM   The rear-drive 991 with PASM, lowered 20mm to 25mm at the nose on matched BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:17:53+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,009.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,009.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,499.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,499.00.</span>" sku: "46-258885" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860789330" brand: "Bilstein" part_number: "46-258885" map: "2499.0" cost: "2141.0" --- # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM [46-258885] # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera with PASM BILSTEIN’s B12 Pro-Kit for 991 Porsche 911 Carrera with PASM fits the rear-drive 991 with Porsche Active Suspension Management from 2012 to 2019: Carrera, Carrera S, GTS, T, 50th Anniversary and Black Edition. BILSTEIN dampers and Eibach Pro-Kit springs set the car 20mm to 25mm lower at the front and 15mm at the rear. ### Design and Performance - The kit covers both 991 generations, the Carrera T included. The drop is fixed by the springs, so there is nothing to adjust once the alignment is done. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 991 Carrera - Valving set by BILSTEIN to control the lower spring, so the 991 Carrera is not left underdamped - Fixed ride height on the 991 Carrera, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for 991 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube and twintube - **Front lowering:** 20-25mm - **Rear lowering:** 15mm - **Maximum axle load:** 775kg front, 1,215kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche 911:** 991 _(including Carrera, Carrera S, 50th Anniversary Edition, Carrera GTS, Carrera Black Edition and Carrera T)_ | 2012-2019 ### Notes - **BILSTEIN lists this kit for rear-drive Carrera models with PASM _(Porsche Active Suspension Management)_** - **For the 2012 to 2016 Carrera without PASM, BILSTEIN makes the [B12 Pro-Kit for 991 Carrera without PASM](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-without-pasm-46-258878/)** - **This is a fixed-height kit; ride height and damping are not adjustable** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 991 Carrera with PASM fit the Carrera T?** Yes. BILSTEIN lists the 2018 to 2019 Carrera T alongside the 2012 to 2019 Carrera and Carrera S, the GTS, the 2014 50th Anniversary Edition and the 2016 Black Edition, all with PASM. For cars without PASM, BILSTEIN makes a separate B12 Pro-Kit. - **How much lower will the 991 Carrera sit?** For the 991 Carrera, BILSTEIN quotes lowering of 20mm to 25mm at the front and 15mm at the rear compared with the factory ride height. The springs set that height on the 991 Carrera, so it stays fixed once installed. The B12 Pro-Kit for 991 is rated for axle loads up to 775kg front and 1,215kg rear. - **Why replace the dampers when lowering the 991 Carrera?** The factory dampers on the 991 Carrera are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 991 Carrera underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in this 991 Carrera kit, so both suit the lower ride height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the 991 Carrera needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 991 Carrera is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 991 Carrera goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 991 Carrera is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for G20 BMW 330e [47-326170]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-47-326170/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for G20 BMW 330e   Fixed street valving and threaded height adjustment, tuned for the extra rear weight of the G20 330e plug-in hybrid." last_modified: "2026-11-13T20:19:37+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,047.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,047.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,820.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,820.00.</span>" sku: "47-326170" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860907154" brand: "Bilstein" part_number: "47-326170" map: "1820.0" cost: "1505.79" --- # BILSTEIN EVO S Coilovers for G20 BMW 330e [47-326170] # BILSTEIN EVO S Coilovers for G20 BMW 330e BILSTEIN’s EVO S Coilovers for G20 BMW 330e are built for the rear-drive plug-in hybrid 3 Series of 2021 to 2023, whose battery adds weight over the rear axle. BILSTEIN answers that with a stiff 800.8 lbs/in linear rear spring and a rear axle rating of 1,325kg, on threaded EVO dampers with fixed street valving. ### Design and Performance - A 397.6 lbs/in progressive front spring balances the stiff linear rear, and BILSTEIN quotes 35mm to 50mm of front lowering and 30mm to 55mm at the rear. ### Features - Fixed damping valving chosen by BILSTEIN for the G20 330e, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 330e - Springs and dampers tuned as a pair for the G20 330e, with progressive front and linear rear spring rates and a black finish - Built in Germany, the EVO S Coilovers for G20 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 397.6 lbs/in, progressive - **Rear spring rate:** 800.8 lbs/in, linear - **Front lowering:** 35-50mm - **Rear lowering:** 30-55mm - **Maximum axle load:** 1,075kg front, 1,325kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330e 2021-2023)_ | 2021-2023 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For the 330e xDrive, BILSTEIN makes the [EVO S Coilovers for G20 330e xDrive](https://bulletproofautomotive.com/product/bilstein-evo-s-coilovers-for-g20-bmw-330e-xdrive-47-326163/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Why does the 330e need its own BILSTEIN EVO S Coilovers for G20 kit?** The 330e carries its battery pack under the rear of the car, so it is heavier at the back than a 330i. BILSTEIN fits a stiffer linear rear spring and rates the rear axle for 1,325kg, which keeps the plug-in hybrid level and controlled at the lower ride height. - **What ride height range does the kit give the G20 330e?** For the G20 330e, BILSTEIN quotes lowering of 35mm to 50mm at the front and 30mm to 55mm at the rear compared with the factory ride height. On the G20 330e, the threaded bodies set the exact height inside that range. The EVO S Coilovers for G20 are rated for axle loads up to 1,075kg front and 1,325kg rear. - **What is the difference between EVO S and EVO T1?** For the G20 330e, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the G20 330e to the track. For a G20 330e that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G20 330e needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 330e before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the G20 330e goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 330e is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86 [48-330725]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-zc6-zd8-brz-zn6-zn8-toyota-86-gr86-48-330725/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86   One BILSTEIN kit for both generations of the BRZ, 86, GR86 and FR-S, with ten damping settings and a measured drop." last_modified: "2026-11-13T20:14:59+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,568.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,568.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,469.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,469.00.</span>" sku: "48-330725" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860904603" brand: "Bilstein" part_number: "48-330725" map: "2469.0" cost: "2117.47" --- # BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86 [48-330725] # BILSTEIN B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86 BILSTEIN’s B16 PSS10 Coilovers for ZC6 / ZD8 Subaru BRZ and ZN6 / ZN8 Toyota 86 / GR86 cover both generations of the twins, from the 2013 BRZ and Scion FR-S to the current BRZ and GR86. These are light, low cars that need control more than a big drop, and BILSTEIN keeps the lowering to 10mm to 30mm while adding a 10-click adjuster to every corner. ### Design and Performance - Progressive springs at 257 lbs/in front and 378 lbs/in rear keep the twins adjustable on the limit, and BILSTEIN rates the kit for 876kg front and 943kg rear. ### Features - A 10-position adjuster on each BRZ and GR86 damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the BRZ and GR86 ride height and guards against corrosion - Progressive springs finished in blue, with rates matched to the front and rear axle loads of the BRZ and GR86 - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for ZC6 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 257 lbs/in, progressive - **Rear spring rate:** 378 lbs/in, progressive - **Front lowering:** 10-30mm - **Rear lowering:** 10-30mm - **Maximum axle load:** 876kg front, 943kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Scion FR-S:** ZN6 | 2013-2016 - **Subaru BRZ:** ZC6 / ZD8 | 2013-2020 and 2022-2026 - **Toyota 86:** ZN6 | 2017-2020 - **Toyota GR86:** ZN8 | 2022-2026 ### Notes - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for ZC6 fit the second-generation BRZ and GR86?** Yes. BILSTEIN lists the 2022 and later BRZ and GR86 alongside the 2013 to 2020 BRZ, the 2017 to 2020 Toyota 86 and the 2013 to 2016 Scion FR-S. One kit covers both generations of the twins, which share their front and rear suspension layout. - **How much does the kit lower the BRZ, 86 and GR86?** For the BRZ, 86 and GR86, BILSTEIN quotes lowering of 10mm to 30mm front and rear compared with the factory ride height. On the BRZ and GR86, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for ZC6 are rated for axle loads up to 876kg front and 943kg rear. - **Is the B16 kit too firm for daily driving on the BRZ, 86 and GR86?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the BRZ, 86 and GR86, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most BRZ and GR86 owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the BRZ, 86 and GR86 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the BRZ and GR86 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the BRZ, 86 and GR86 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the BRZ and GR86 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [48-304498]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-g29-bmw-z4-and-a90-toyota-gr-supra-48-304498/" lang: "en-US" type: "product" description: "BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra   One BILSTEIN EVO T1 kit for the G29 Z4 and the A90 GR Supra, with ten damping settings per corner." last_modified: "2026-11-13T22:03:13+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,924.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,924.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,599.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,599.00.</span>" sku: "48-304498" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860889351" brand: "Bilstein" part_number: "48-304498" map: "2599.0" cost: "2135.43" --- # BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra [48-304498] # BILSTEIN EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra BILSTEIN’s EVO T1 Coilovers for G29 BMW Z4 and A90 Toyota GR Supra fit both cars of the joint BMW and Toyota platform, from the 2019 Z4 sDrive30i and the 2020 GR Supra to the 2026 models BILSTEIN lists. EVO T1 adds a 10-click adjuster to threaded EVO dampers, giving the short-wheelbase pair the control they need on a track day. ### Design and Performance - Progressive springs at 403 lbs/in front and 728 lbs/in rear are rated for 870kg front and 1,000kg rear, with 20mm to 35mm of lowering at the front. ### Features - 10-stage damping adjustment on every corner of the Z4 and GR Supra, changing rebound and compression with each click - Height-adjustable twintube and monotube dampers with threaded bodies for setting the stance of the Z4 and GR Supra - Springs and dampers tuned as a pair for the Z4 and GR Supra, with progressive spring rates and a black finish - Built in Germany, the EVO T1 Coilovers for G29 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Twintube and monotube - **Front spring rate:** 403 lbs/in, progressive - **Rear spring rate:** 728 lbs/in, progressive - **Front lowering:** 20-35mm - **Rear lowering:** 10-35mm - **Maximum axle load:** 870kg front, 1,000kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW Z4:** G29 | 2019-2026 - **Toyota GR Supra:** A90 | 2020-2026 ### Notes - **Cars with electronic suspension require the BILSTEIN [B1 Active to Passive Conversion Kit](https://bulletproofautomotive.com/product/bilstein-b1-active-to-passive-conversion-kit-g29-bmw-z4-a90-gr-supra-14-292408/), sold separately** - **For cars with adaptive dampers, BILSTEIN also makes the [EVO SE Plug and Play Coilovers for G29 Z4 and A90 GR Supra](https://bulletproofautomotive.com/product/bilstein-evo-se-plug-and-play-coilovers-g29-bmw-z4-a90-toyota-gr-supra-49-304619/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO T1 Coilovers for G29 fit cars with adaptive dampers?** BILSTEIN lists the kit for cars without electronic suspension. Cars with adaptive dampers need BILSTEIN canceller kit 14-292408, sold separately, to fit this kit. The alternative for those cars is the EVO SE kit, which keeps the factory damping control working. - **How much does the kit lower the G29 Z4 and A90 GR Supra?** For the G29 Z4 and A90 GR Supra, BILSTEIN quotes lowering of 20mm to 35mm at the front and 10mm to 35mm at the rear compared with the factory ride height. On the Z4 and GR Supra, the threaded bodies set the exact height inside that range. The EVO T1 Coilovers for G29 are rated for axle loads up to 870kg front and 1,000kg rear. - **What is the difference between EVO T1 and EVO S?** For the G29 Z4 and A90 GR Supra, both are height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping for road use, while EVO T1 adds a 10-stage adjuster that moves rebound and compression together, so the Z4 and GR Supra can run softer on the street and firmer on track without changing parts. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G29 Z4 and A90 GR Supra needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Z4 and GR Supra before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO T1 kit with its Limited 5-Year Warranty, and any claim for the G29 Z4 and A90 GR Supra goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Z4 and GR Supra is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO T1 Coilovers for B9 Audi RS5 [48-303538]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-t1-coilovers-for-b9-audi-rs5-48-303538/" lang: "en-US" type: "product" description: "BILSTEIN EVO T1 Coilovers for B9 Audi RS5   Road-and-track BILSTEIN coilovers for the twin-turbo B9 RS5, with ten damping settings and a measured drop." last_modified: "2026-11-13T20:20:20+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,572.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,572.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,175.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,175.00.</span>" sku: "48-303538" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860850542" brand: "Bilstein" part_number: "48-303538" map: "3175.0" cost: "2601.91" --- # BILSTEIN EVO T1 Coilovers for B9 Audi RS5 [48-303538] # BILSTEIN EVO T1 Coilovers for B9 Audi RS5 BILSTEIN’s EVO T1 Coilovers for B9 Audi RS5 fit the twin-turbo V6 RS5 of 2018, 2019 and 2021, the generation built on the B9 platform. EVO T1 is BILSTEIN’s road-and-track coilover, and on the RS5 it pairs monotube EVO dampers with stiff progressive springs and a 10-click adjuster per corner. The drop is a measured 15mm to 25mm. ### Design and Performance - Progressive springs at 528 lbs/in front and 625.5 lbs/in rear are rated for 1,225kg front and 1,235kg rear, enough for the quattro drivetrain and V6. ### Features - 10-stage damping adjustment on every corner of the B9 RS5, changing rebound and compression with each click - Height-adjustable monotube dampers with threaded bodies for setting the stance of the B9 RS5 - Springs and dampers tuned as a pair for the B9 RS5, with progressive spring rates and a black finish - Built in Germany, the EVO T1 Coilovers for B9 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 528 lbs/in, progressive - **Rear spring rate:** 625.5 lbs/in, progressive - **Front lowering:** 15-25mm - **Rear lowering:** 15-25mm - **Maximum axle load:** 1,225kg front, 1,235kg rear - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Audi RS5:** B9 | 2018-2019 and 2021 ### Notes - **BILSTEIN states that the electronic suspension must be disabled to install this kit** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **What happens to the RS5 Dynamic Ride Control or adaptive damping with the BILSTEIN EVO T1 Coilovers for B9?** BILSTEIN states that the electronic suspension must be disabled to fit this kit, because the EVO T1 dampers are adjusted by hand rather than by the car. Bulletproof Automotive can advise on how that is done on a specific RS5 before the order ships. - **How much does the kit lower the B9 RS5?** For the B9 RS5, BILSTEIN quotes lowering of 15mm to 25mm front and rear compared with the factory ride height. On the B9 RS5, the threaded bodies set the exact height inside that range. The EVO T1 Coilovers for B9 are rated for axle loads up to 1,225kg front and 1,235kg rear. - **What is the difference between EVO T1 and EVO S?** For the B9 RS5, both are height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping for road use, while EVO T1 adds a 10-stage adjuster that moves rebound and compression together, so the B9 RS5 can run softer on the street and firmer on track without changing parts. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the B9 RS5 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the B9 RS5 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO T1 kit with its Limited 5-Year Warranty, and any claim for the B9 RS5 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the B9 RS5 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM [46-190666]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-987-porsche-boxster-with-pasm-46-190666/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM   A fixed 30mm drop for the PASM-equipped 987 Boxster and Boxster S, on matched BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:18:06+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,648.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,648.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,199.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,199.00.</span>" sku: "46-190666" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860790084" brand: "Bilstein" part_number: "46-190666" map: "2199.0" cost: "1905.95" --- # BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM [46-190666] # BILSTEIN B12 Pro-Kit for 987 Porsche Boxster with PASM BILSTEIN’s B12 Pro-Kit for 987 Porsche Boxster with PASM fits the 2005 to 2011 Boxster and Boxster S, the RS 60 Spyder and the limited editions, on cars built with Porsche Active Suspension Management. BILSTEIN dampers and Eibach Pro-Kit springs lower the roadster 30mm at each end for a cleaner, more planted stance. ### Design and Performance - BILSTEIN tunes the dampers and springs together for the PASM car, so the lower stance comes with valving made for it and nothing to set after the alignment. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 987 Boxster - Valving set by BILSTEIN to control the lower spring, so the 987 Boxster is not left underdamped - Fixed ride height on the 987 Boxster, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for 987 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 30mm - **Rear lowering:** 30mm - **Maximum axle load:** 785kg front, 940kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche Boxster:** 987 _(including S, Limited Edition, RS 60 Spyder, S Limited Edition and S Porsche Design 2)_ | 2005-2011 ### Notes - **BILSTEIN lists this kit for cars with PASM _(Porsche Active Suspension Management)_** - **This is a fixed-height kit; ride height and damping are not adjustable** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 987 Boxster fit the RS 60 Spyder?** Yes. BILSTEIN lists the 2008 RS 60 Spyder with PASM along with the 2005 to 2011 Boxster and Boxster S, the 2008 Limited Edition and S Limited Edition and the 2009 S Porsche Design 2. The kit is for cars with PASM. - **How much does the kit lower the 987 Boxster?** For the 987 Boxster, BILSTEIN quotes lowering of 30mm front and rear compared with the factory ride height. The springs set that height on the 987 Boxster, so it stays fixed once installed. The B12 Pro-Kit for 987 is rated for axle loads up to 785kg front and 940kg rear. - **Why replace the dampers when lowering the 987 Boxster?** The factory dampers on the 987 Boxster are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 987 Boxster underdamped and shorten damper life. In this kit the damper valving is matched to the Eibach spring, so the 987 Boxster keeps its composure at the lower height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the 987 Boxster needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 987 Boxster is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 987 Boxster goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 987 Boxster is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect [47-272514]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b14-pss-coilovers-for-v408-ford-transit-connect-47-272514/" lang: "en-US" type: "product" description: "BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect   A lower, tighter V408 Transit Connect on threaded BILSTEIN dampers, with fixed valving and axle ratings for a working van." last_modified: "2026-11-13T21:47:05+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,381.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,381.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,648.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,648.00.</span>" sku: "47-272514" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860823928" brand: "Bilstein" part_number: "47-272514" map: "1648.0" cost: "1437.36" --- # BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect [47-272514] # BILSTEIN B14 PSS Coilovers for V408 Ford Transit Connect BILSTEIN’s B14 PSS Coilovers for V408 Ford Transit Connect bring threaded, height-adjustable BILSTEIN dampers to the second-generation Transit Connect in XL, XLT and Titanium form. The B14 kit has fixed valving chosen by BILSTEIN for the vehicle, so it lowers and tightens the van without asking the owner to manage adjusters. It suits a show van or a shop vehicle that should look as good as the cars it serves. ### Design and Performance - Progressive springs at 267 lbs/in front and 336 lbs/in rear are rated for 1,225kg front and 1,355kg rear, enough for a loaded cargo or passenger van. ### Features - Fixed damping valving chosen by BILSTEIN for the Transit Connect, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the Transit Connect - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the Transit Connect - The B14 PSS Coilovers for V408 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 267 lbs/in, progressive - **Rear spring rate:** 336 lbs/in, progressive - **Front lowering:** 20-35mm - **Rear lowering:** 10-35mm - **Maximum axle load:** 1,225kg front, 1,355kg rear - **Finish:** Yellow dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Ford Transit Connect:** V408 _(including Titanium, XL and XLT)_ | 2014-2022 ### Notes - **The images show a representative BILSTEIN B14 PSS kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN lists the 2022 model with rear lowering figures only** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B14 PSS Coilovers for V408 fit the 2022 Transit Connect?** BILSTEIN lists the 2014 to 2021 Transit Connect XL, XLT and Titanium for the full kit, and lists the 2022 model with rear lowering figures only. Bulletproof Automotive can confirm front fitment for a 2022 van with BILSTEIN before the order ships. - **How much does the kit lower the Transit Connect?** BILSTEIN quotes 20mm to 35mm of lowering at the front and 10mm to 35mm at the rear for the 2014 to 2021 Transit Connect, and the rear range only for the 2022 model. The B14 PSS Coilovers for V408 vans are rated for axle loads up to 1,225kg front and 1,355kg rear. - **What is the difference between B14 and B16 kits?** The B14 PSS Coilovers for V408 vans have fixed damping that BILSTEIN sets for the vehicle, with threaded bodies for height adjustment. B16 kits add a damping adjuster. For a van that carries loads and covers long distances, fixed valving keeps the setup simple. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the Transit Connect needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Transit Connect before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B14 PSS kit with its Limited 5-Year Warranty, and any claim for the Transit Connect goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Transit Connect is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series [48-279765]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-g30-bmw-5-series-48-279765/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series   A 20mm to 40mm drop and ten clicks of BILSTEIN damping for the steel-sprung G30 530i, 530e and 540i." last_modified: "2026-11-13T20:14:55+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,905.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,905.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,702.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,702.00.</span>" sku: "48-279765" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860844992" brand: "Bilstein" part_number: "48-279765" map: "2702.0" cost: "2335.53" --- # BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series [48-279765] # BILSTEIN B16 PSS10 Coilovers for G30 BMW 5 Series BILSTEIN’s B16 PSS10 Coilovers for G30 BMW 5 Series fit the 530i, 530e plug-in hybrid and 540i from 2017 to 2022, on cars without electronic damping. The G30 is a quiet, fast executive car, and a 20mm to 40mm drop with ten damping settings per corner gives it the stance and body control its sport packages hint at. ### Design and Performance - A 457 lbs/in progressive front spring and a 286 lbs/in progressive rear are rated for up to 1,405kg on the rear axle, which covers the battery weight of the 530e. ### Features - 10 damping settings per corner of the G30 5 Series, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the G30 5 Series ride height is set on the car and the bodies resist road salt - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the G30 5 Series - The B16 PSS10 Coilovers for G30 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 457 lbs/in, progressive - **Rear spring rate:** 286 lbs/in, progressive - **Front lowering:** 20-40mm - **Rear lowering:** 20-40mm - **Maximum axle load:** 1,125kg front, 1,405kg rear - **Finish:** Zinc-plated dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 5 Series:** G30 _(including 530e, 530i and 540i)_ | 2017-2022 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **The images show a representative BILSTEIN B16 PSS10 kit; mounts, brackets and springs differ by vehicle** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for G30 fit cars with Adaptive M Suspension?** No. BILSTEIN lists the 2017 to 2022 530i and 540i and the 2018 to 2022 530e without electronic suspension. Cars with adaptive dampers use an electronically controlled system that this manual-adjust kit is not designed to replace, so check the options before ordering. - **What ride height range does the kit give the G30 5 Series?** For the G30 5 Series, BILSTEIN quotes lowering of 20mm to 40mm front and rear compared with the factory ride height. On the G30 5 Series, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for G30 are rated for axle loads up to 1,125kg front and 1,405kg rear. - **What does the 10-stage adjuster change on the G30 5 Series?** On the G30 5 Series, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the G30 5 Series, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the G30 5 Series needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G30 5 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the G30 5 Series goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G30 5 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series [47-300118]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-s-coilovers-for-g20-bmw-3-series-and-g22-4-series-47-300118/" lang: "en-US" type: "product" description: "BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series   Threaded height adjustment and fixed BILSTEIN valving for the rear-drive G20 and G22, with nothing to fiddle with." last_modified: "2026-11-13T20:19:33+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,956.00</bdi></span></del> <span class="screen-reader-text">Original price was: $1,956.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,739.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,739.00.</span>" sku: "47-300118" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860859460" brand: "Bilstein" part_number: "47-300118" map: "1739.0" cost: "1441.27" --- # BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series [47-300118] # BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series BILSTEIN’s EVO S Coilovers for G20 BMW 3 Series and G22 4 Series fit the rear-drive 330i, 430i and M440i through 2025 and the M340i of 2020 to 2022, on cars without adaptive dampers. It is the simplest EVO kit: threaded, height-adjustable dampers with fixed valving that BILSTEIN sets for each car, for an owner who wants a better stance and a tighter road car. ### Design and Performance - Springs run 405 lbs/in front and 756 lbs/in rear, both progressive. BILSTEIN gives the M340i a smaller front drop, 20mm to 35mm, than the 330i, 430i and M440i. ### Features - Fixed damping valving chosen by BILSTEIN for the G20 3 Series, with nothing to set or forget - Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 3 Series - Springs and dampers tuned as a pair for the G20 3 Series, with progressive spring rates and a black finish - Built in Germany, the EVO S Coilovers for G20 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Fixed, valved by BILSTEIN for the application - **Damper design:** Monotube and twintube - **Front spring rate:** 405 lbs/in, progressive - **Rear spring rate:** 756 lbs/in, progressive - **Front lowering:** 35-50mm or 20-35mm, by model - **Rear lowering:** 30-55mm or 15-40mm, by model - **Maximum axle load:** Up to 1,115kg front, 1,325kg rear, by model - **Finish:** Grey dampers, black springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330i 2019-2025, M340i 2020-2022)_ | 2019-2025 - **BMW 4 Series:** G22 _(430i 2021-2025, M440i 2021-2025)_ | 2021-2025 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **For xDrive cars, BILSTEIN makes the [EVO S Coilovers for G20 xDrive](https://bulletproofautomotive.com/product/bilstein-evo-s-coilovers-for-g20-bmw-3-series-and-g22-4-series-xdrive-47-304932/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO S Coilovers for G20 fit the M440i?** Yes. BILSTEIN lists the rear-drive M440i from 2021 to 2025 alongside the 330i, 430i and the 2020 to 2022 M340i, all without electronic suspension. xDrive cars use a separate EVO S kit with different front hardware, which Bulletproof Automotive also stocks. - **How much lower will the rear-drive G20 and G22 sit?** BILSTEIN quotes lowering of 35mm to 50mm at the front and 30mm to 55mm at the rear on the 330i, 430i and M440i, and 20mm to 35mm at the front and 15mm to 40mm at the rear on the M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO S Coilovers for G20 are rated for axle loads up to 1,115kg front and 1,325kg rear. - **What is the difference between EVO S and EVO T1?** For the rear-drive G20 and G22, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the G20 3 Series to the track. For a G20 3 Series that only needs a lower, tighter stance on the road, EVO S is the simpler choice. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM [46-258892]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-4-without-pasm-46-258892/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM   A fixed 20mm to 25mm drop at the nose for the 991.1 Carrera 4 without PASM, on BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:17:49+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,407.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,407.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,999.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,999.00.</span>" sku: "46-258892" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860789347" brand: "Bilstein" part_number: "46-258892" map: "1999.0" cost: "1716.06" --- # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM [46-258892] # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM BILSTEIN’s B12 Pro-Kit for 991 Porsche 911 Carrera 4 without PASM is for the all-wheel-drive 991.1 built on conventional dampers: the Carrera 4, 4S, Carrera 4 GTS and Carrera 4 Black Edition of 2013 to 2016. BILSTEIN dampers and Eibach Pro-Kit springs lower the nose 20mm to 25mm and the tail 15mm, a fixed drop that suits a car used mainly on the road. ### Design and Performance - The dampers carry valving made for the Eibach springs, so the car keeps its composure over broken roads at the lower height. Nothing needs setting after installation beyond the alignment. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 991 Carrera 4 - Valving set by BILSTEIN to control the lower spring, so the 991 Carrera 4 is not left underdamped - Fixed ride height on the 991 Carrera 4, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for 991 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube and twintube - **Front lowering:** 20-25mm - **Rear lowering:** 15mm - **Maximum axle load:** 800kg front, 1,215kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche 911:** 991 _(including Carrera 4, Carrera 4S, Carrera 4 GTS and Carrera 4 Black Edition)_ | 2013-2016 ### Notes - **BILSTEIN lists this kit for Carrera 4 models without PASM _(Porsche Active Suspension Management)_** - **For PASM cars, BILSTEIN makes the [B12 Pro-Kit for 991 Carrera 4 with PASM](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-4-with-pasm-46-258908/)** - **This is a fixed-height kit; ride height and damping are not adjustable** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 991 Carrera 4 without PASM fit the 991.2?** No. BILSTEIN lists this kit for the 2013 to 2016 Carrera 4, 4S, 4 GTS and Black Edition without PASM, the 991.1 generation. For PASM cars, including later years, BILSTEIN makes a separate B12 Pro-Kit for the Carrera 4. Confirm the equipment of the car before ordering. - **How much does the kit lower the 991 Carrera 4?** For the 991 Carrera 4, BILSTEIN quotes lowering of 20mm to 25mm at the front and 15mm at the rear compared with the factory ride height. The springs set that height on the 991 Carrera 4, so it stays fixed once installed. The B12 Pro-Kit for 991 is rated for axle loads up to 800kg front and 1,215kg rear. - **Why replace the dampers when lowering the 991 Carrera 4?** The factory dampers on the 991 Carrera 4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 991 Carrera 4 underdamped and shorten damper life. In this kit the damper valving is matched to the Eibach spring, so the 991 Carrera 4 keeps its composure at the lower height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the 991 Carrera 4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 991 Carrera 4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 991 Carrera 4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 991 Carrera 4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI [48-249546]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-va-subaru-wrx-and-wrx-sti-48-249546/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI   Ten clicks of BILSTEIN damping and a mild 15mm to 25mm drop for the 2015 to 2021 VA WRX and WRX STI." last_modified: "2026-11-13T20:12:58+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,900.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,900.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,699.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,699.00.</span>" sku: "48-249546" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860772721" brand: "Bilstein" part_number: "48-249546" map: "2699.0" cost: "2312.77" --- # BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI [48-249546] # BILSTEIN B16 PSS10 Coilovers for VA Subaru WRX and WRX STI BILSTEIN’s B16 PSS10 Coilovers for VA Subaru WRX and WRX STI fit both cars from 2015 to 2021, the Type RA and S209 included. Subaru already fits BILSTEIN dampers to many STIs from the factory, so this kit is a step up within the same family: threaded bodies, tender springs at the front and a 10-click adjuster per corner. The drop is mild, 15mm to 25mm, which suits a rally-bred car that still has to cope with rough roads. ### Features - 10 damping settings per corner of the VA WRX, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the VA WRX ride height is set on the car and the bodies resist road salt - Linear front and double linear rear springs in blue, rated by BILSTEIN for the weight on each axle of the VA WRX - Helper springs that hold the VA WRX main springs in place as the wheel drops away from the body - The B16 PSS10 Coilovers for VA are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 405.69 lbs/in, linear - **Rear spring rate:** 285.7 lbs/in, double linear - **Front tender spring rate:** 114.28 lbs/in - **Front lowering:** 15-20mm - **Rear lowering:** 15-25mm - **Maximum axle load:** 1,075kg front, 1,040kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Subaru WRX:** VA _(including Limited, Premium, Sport and Sport-tech)_ | 2015-2021 - **Subaru WRX STI:** VA _(including Launch Edition, Limited, Series.HyperBlue, Type RA and S209)_ | 2015-2021 ### Notes - **BILSTEIN notes that wheel spacers may be required for some wheel and tire combinations** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for VA fit both the WRX and the STI?** Yes. BILSTEIN lists the 2015 to 2021 WRX across its trim levels, including the Sport and Sport-tech of 2017 and 2018, and the WRX STI in base, Limited, Launch Edition, Series.HyperBlue, Type RA and S209 form. One kit covers both cars across those years. - **What ride height range does the kit give the VA WRX and WRX STI?** For the VA WRX and WRX STI, BILSTEIN quotes lowering of 15mm to 20mm at the front and 15mm to 25mm at the rear compared with the factory ride height. On the VA WRX, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for VA are rated for axle loads up to 1,075kg front and 1,040kg rear. - **What does the 10-stage adjuster change on the VA WRX and WRX STI?** On the VA WRX and WRX STI, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the VA WRX, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the VA WRX and WRX STI needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the VA WRX before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the VA WRX and WRX STI goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the VA WRX is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang [48-253901]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-s550-ford-mustang-48-253901/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang   German monotube damping for the independent-rear S550 Mustang, with a 20mm to 45mm drop up front and ten clicks of adjustment." last_modified: "2026-11-13T20:12:53+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,611.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,611.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,499.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,499.00.</span>" sku: "48-253901" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860777900" brand: "Bilstein" part_number: "48-253901" map: "2499.0" cost: "2163.15" --- # BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang [48-253901] # BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang BILSTEIN’s B16 PSS10 Coilovers for S550 Ford Mustang fit the 2015 to 2023 GT, EcoBoost, V6 and Bullitt, the first Mustang generation built around independent rear suspension. That rear end deserves better than tired factory dampers, and this kit brings German monotube units in threaded bodies with a 10-click adjuster at each corner. It suits the S550 owner who autocrosses on weekends and still drives the car to work. ### Design and Performance - A 400 lbs/in progressive front spring and a stiff 857 lbs/in progressive rear control squat under power and help the S550 put its torque down out of slow corners. BILSTEIN rates the kit for the weight of the V8 GT. ### Features - A 10-position adjuster on each S550 Mustang damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the S550 Mustang ride height and guards against corrosion - Progressive springs finished in blue, with rates matched to the front and rear axle loads of the S550 Mustang - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for S550 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 857 lbs/in, progressive - **Front lowering:** 20-45mm - **Rear lowering:** 25-40mm - **Maximum axle load:** 1,075kg front, 1,148kg rear - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Ford Mustang:** S550 _(including EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, V6 and Bullitt)_ | 2015-2023 ### Notes - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for S550 fit cars with MagneRide?** BILSTEIN lists the 2015 to 2023 Mustang EcoBoost and GT in their standard and upper trims, the V6 through 2017, the Bullitt and the 2015 GT 50 Years Limited Edition, without naming MagneRide. MagneRide dampers are electronically controlled, so confirm fitment for a MagneRide car with Bulletproof Automotive before ordering. - **How much does the kit lower the S550 Mustang?** For the S550 Mustang, BILSTEIN quotes lowering of 20mm to 45mm at the front and 25mm to 40mm at the rear compared with the factory ride height. On the S550 Mustang, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for S550 are rated for axle loads up to 1,075kg front and 1,148kg rear. - **Is the B16 kit too firm for daily driving on the S550 Mustang?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the S550 Mustang, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most S550 Mustang owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the S550 Mustang needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the S550 Mustang before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the S550 Mustang goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the S550 Mustang is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear [48-254960]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-50mm-strut-independent-rear-48-254960/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear   For the Mk7 Golf and SportWagen with the 50mm strut and multi-link rear: 30mm to 50mm lower, ten damping settings." last_modified: "2026-11-13T21:47:42+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,600.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,600.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,799.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,799.00.</span>" sku: "48-254960" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860772974" brand: "Bilstein" part_number: "48-254960" map: "1799.0" cost: "1566.18" --- # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear [48-254960] # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear BILSTEIN’s B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear, fit the 2015 to 2021 Golf and the 2015 to 2019 Golf SportWagen built with a 50mm outside strut diameter and multi-link independent rear suspension. The kit lowers both ends 30mm to 50mm and adds a 10-click adjuster per corner. ### Design and Performance - A 400 lbs/in progressive front spring pairs with a 302 lbs/in linear rear, on zinc-plated front and yellow rear monotube dampers. ### Features - A 10-position adjuster on each Mk7 Golf damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the Mk7 Golf ride height and guards against corrosion - Progressive front and linear rear springs finished in blue, with rates matched to the front and rear axle loads of the Mk7 Golf - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for Mk7 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 400 lbs/in, progressive - **Rear spring rate:** 302 lbs/in, linear - **Front lowering:** 30-50mm - **Rear lowering:** 30-50mm - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Volkswagen Golf:** Mk7 _(including Launch Edition, S, SE, SEL, Wolfsburg Edition and TSi)_ | 2015-2021 - **Volkswagen Golf SportWagen:** Mk7 _(including S, SE and SEL)_ | 2015-2019 ### Notes - **For cars with a 50mm strut and independent rear suspension; see the [50mm strut and solid rear axle kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-tdi-50mm-solid-rear-axle-48-230032/) and the [55mm strut kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-volkswagen-golf-55mm-strut-48-230049/) for other Mk7 Golf versions** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit?** BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 50mm outside strut diameter and independent rear suspension. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping. - **How much does the kit lower the Mk7 Golf?** For the Mk7 Golf, BILSTEIN quotes lowering of 30mm to 50mm front and rear compared with the factory ride height. The B16 PSS10 Coilovers for Mk7 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Mk7 Golf can run in practice. - **Is the B16 kit too firm for daily driving on the Mk7 Golf?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the Mk7 Golf, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most Mk7 Golf owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e [48-241373]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-w205-mercedes-benz-c300-and-c350e-48-241373/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e   BILSTEIN monotube coilovers with ten damping settings for the W205 C300 and the C350e plug-in hybrid." last_modified: "2026-11-13T20:14:38+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,466.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,466.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,399.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,399.00.</span>" sku: "48-241373" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860758442" brand: "Bilstein" part_number: "48-241373" map: "2399.0" cost: "2075.59" --- # BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e [48-241373] # BILSTEIN B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e BILSTEIN’s B16 PSS10 Coilovers for W205 Mercedes-Benz C300 and C350e are BILSTEIN’s 10-click coilover kit for the fourth-generation C-Class sedan, listed for the C300 and the C350e plug-in hybrid. The kit fits monotube dampers on threaded bodies with a 371 lbs/in progressive front spring and a 777 lbs/in linear rear. ### Features - A 10-position adjuster on each W205 C-Class damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the W205 C-Class ride height and guards against corrosion - Progressive front and linear rear springs finished in blue, with rates matched to the front and rear axle loads of the W205 C-Class - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for W205 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 371 lbs/in, progressive - **Rear spring rate:** 777 lbs/in, linear - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Mercedes-Benz C300:** W205 | 2015-2021 - **Mercedes-Benz C350e:** W205 | 2016-2018 ### Notes - **BILSTEIN USA does not publish an application list for this part number; fitment shown is from the BILSTEIN distributor listing** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Which cars do the BILSTEIN B16 PSS10 Coilovers for W205 fit?** BILSTEIN USA does not publish an application table for this part number. The BILSTEIN distributor listing gives the C300 from 2015 to 2021 and the C350e from 2016 to 2018. Air suspension and electronic damping options vary, so Bulletproof Automotive confirms fitment with BILSTEIN before the order ships. - **Is the B16 kit too firm for daily driving on the W205 C300 and C350e?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the W205 C300 and C350e, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most W205 C-Class owners settle on a road setting and change it only for events. - **Does the kit lower the car?** Yes. The B16 PSS10 Coilovers for W205 cars set ride height on threaded bodies, so the car sits lower than stock at a height the owner chooses. BILSTEIN does not publish a lowering range for this part number, so the final height depends on the setting chosen during installation. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the W205 C300 and C350e needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the W205 C-Class before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the W205 C300 and C350e goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the W205 C-Class is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5 [49-290868]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-b9-audi-a4-s4-and-f5-a5-s5-rs5-49-290868/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5   For the B9 and F5 Audi with adaptive damping: threaded height adjustment with Audi drive select still in charge." last_modified: "2026-11-13T21:48:21+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,611.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,611.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,499.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,499.00.</span>" sku: "49-290868" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860850092" brand: "Bilstein" part_number: "49-290868" map: "2499.0" cost: "2161.33" --- # BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5 [49-290868] # BILSTEIN B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5 BILSTEIN’s B16 DampTronic Coilovers for B9 Audi A4 / S4 and F5 A5 / S5 / RS5 fit the cars of that generation built with electronic damping, from the 2017 A4 and A4 allroad to the S4, S5 and RS5. Audi drive select keeps controlling the BILSTEIN dampers while threaded bodies set the ride height. ### Features - Dampers built to run on the factory electronic damping control of the B9 A4, so the original buttons and modes keep working - Threaded, zinc-coated damper bodies for setting ride height at each corner of the B9 A4 - Springs and dampers tuned as a pair for the B9 A4, with progressive front and linear rear spring rates and a blue finish - Built in Germany, the B16 DampTronic Coilovers for B9 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 479.33 lbs/in, progressive - **Rear spring rate:** 479.9 lbs/in, linear - **Front lowering:** 10-35mm or 35-50mm or 10-30mm or 5-20mm, by model - **Rear lowering:** 15-35mm or 35-50mm or 10-30mm or 10-20mm, by model - **Maximum axle load:** Up to 1,260kg front, 1,330kg rear, by model - **Finish:** Galvanic front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Audi A4:** B9 | 2017-2020 - **Audi A4 Quattro:** B9 | 2017-2021 - **Audi A4 allroad:** B9 | 2017-2021 - **Audi A5 Quattro:** F5 | 2018-2021 - **Audi A5 Sportback:** F5 | 2018-2021 - **Audi RS5:** F5 | 2018-2019 and 2021 - **Audi S4:** B9 | 2018-2021 - **Audi S5:** F5 | 2018-2021 - **Audi S5 Sportback:** F5 | 2018-2021 ### Notes - **BILSTEIN lists the kit for cars with electronic suspension, and excludes self-leveling suspension on some models** - **For cars without electronic damping, BILSTEIN makes the [B16 PSS10 Coilovers for B9 with 49mm strut](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-b9-audi-a4-s4-and-f5-a5-s5-49mm-strut-48-275071/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for B9 cars fit the A4 allroad?** Yes. BILSTEIN lists the 2017 to 2021 A4 allroad with electronic suspension, with its own 35mm to 50mm lowering range. The kit also fits the A4, A5, S4, S5 and RS5 built with electronic damping. Bulletproof Automotive can check the options from the VIN. - **What ride height range does the kit give the B9 A4, S4, A5, S5 and RS5?** BILSTEIN sets the lowering by model, from 5mm to 20mm at the front of the S4 and S5 to 35mm to 50mm on the A4 allroad. The B16 DampTronic Coilovers for B9 cars set height on threaded bodies and are rated for up to 1,260kg front and 1,330kg rear. - **How is B16 DampTronic different from B16 PSS10?** B16 PSS10 uses a manual 10-click adjuster and suits a B9 A4 built without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the B9 A4, S4, A5, S5 and RS5; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the B9 A4 keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the B9 A4, S4, A5, S5 and RS5 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the B9 A4 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the B9 A4, S4, A5, S5 and RS5 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the B9 A4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA [49-265262]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-c117-mercedes-benz-cla-49-265262/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA   For the CLA250 and AMG CLA 45 with adaptive damping: a 25mm to 45mm drop with the drive modes still working." last_modified: "2026-11-13T20:17:23+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,221.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,221.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,229.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,229.00.</span>" sku: "49-265262" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860806075" brand: "Bilstein" part_number: "49-265262" map: "2229.0" cost: "1933.18" --- # BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA [49-265262] # BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA BILSTEIN’s B16 DampTronic Coilovers for C117 Mercedes-Benz CLA fit the 2014 to 2019 CLA250, front-drive and 4MATIC, and the AMG CLA 45 4MATIC, on cars built with electronic damping. The kit keeps the factory damper control working through the drive-mode selector and lowers the car 25mm to 45mm at each end on threaded bodies. ### Design and Performance - Linear springs at 314 lbs/in front and 340 lbs/in rear sit on zinc-plated front and yellow rear dampers. ### Features - Works with the factory electronic suspension of the C117 CLA, retaining its controls and active functions - Monotube dampers in zinc-coated threaded bodies, so the C117 CLA ride height is set on the car and the bodies resist road salt - Linear springs in blue, rated by BILSTEIN for the weight on each axle of the C117 CLA - The B16 DampTronic Coilovers for C117 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 314 lbs/in, linear - **Rear spring rate:** 340 lbs/in, linear - **Front lowering:** 25-45mm - **Rear lowering:** 25-45mm - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Mercedes-AMG CLA 45:** C117 | 2014-2019 - **Mercedes-Benz CLA-Class:** C117 _(including CLA250 4Matic and CLA250)_ | 2014-2019 ### Notes - **BILSTEIN states that modification to the existing wiring harness is required** - **For cars without electronic damping, BILSTEIN makes the [B16 PSS10 Coilovers for C117 CLA](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-c117-mercedes-benz-cla-48-230971/)** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Is any modification needed to fit the BILSTEIN B16 DampTronic Coilovers for C117 cars?** Yes. BILSTEIN states that the existing wiring harness has to be modified to install this kit. The work connects the BILSTEIN dampers to the factory damping control and is best done by a shop familiar with Mercedes-Benz electrical work, followed by a wheel alignment. - **What ride height range does the kit give the C117 CLA with adaptive damping?** For the C117 CLA with adaptive damping, BILSTEIN quotes lowering of 25mm to 45mm front and rear compared with the factory ride height. The B16 DampTronic Coilovers for C117 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the C117 CLA can run in practice. - **How is B16 DampTronic different from B16 PSS10?** B16 PSS10 uses a manual 10-click adjuster and suits a C117 CLA built without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the C117 CLA with adaptive damping; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the C117 CLA keeps managing the dampers. - **Which CLA models does the kit fit?** BILSTEIN lists the CLA250 and CLA250 4MATIC from 2014 to 2019 and the AMG CLA 45 4MATIC over the same years, each with electronic suspension. CLA models without electronic damping take the manual-adjust B16 PSS10 kit, which Bulletproof Automotive also stocks. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the C117 CLA with adaptive damping goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the C117 CLA is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop [46-276346]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-20mm-front-drop-46-276346/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop   The milder of the two B12 kits for the E9X M3: a fixed 20mm front and 15mm rear drop on BILSTEIN dampers." last_modified: "2026-11-13T20:18:37+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,130.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,130.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,599.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,599.00.</span>" sku: "46-276346" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" clearance_item: "t" regular_stock: "false" units_per_sku: "1" upc: "651860812182" brand: "Bilstein" part_number: "46-276346" map: "2599.0" cost: "2246.96" --- # BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop [46-276346] # BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 20mm Front Drop BILSTEIN’s B12 Pro-Kit for E9X BMW M3 with EDC, in the 20mm front drop version, lowers the 2008 to 2013 V8 M3 by 20mm at the nose and 15mm at the tail. BILSTEIN dampers and Eibach Pro-Kit springs are matched as a set, and the height stays where the springs put it. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the E9X M3 - Valving set by BILSTEIN to control the lower spring, so the E9X M3 is not left underdamped - Fixed ride height on the E9X M3, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for E9X is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 20mm - **Rear lowering:** 15mm - **Maximum axle load:** 1,060kg front, 1,190kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **BMW M3:** E90 / E92 / E93 | 2008-2013 ### Notes - **BILSTEIN lists this kit for M3 models with Electronic Damper Control _(EDC)_; ask Bulletproof Automotive how the EDC system is handled before ordering** - **This is a fixed-height kit; ride height and damping are not adjustable** - **For a 25mm front drop, BILSTEIN makes the [B12 Pro-Kit for E9X M3 with 25mm front drop](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-25mm-front-drop-46-276339/)** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **How do the two BILSTEIN B12 Pro-Kit for E9X M3 kits differ?** BILSTEIN lists two B12 Pro-Kits for the 2008 to 2013 E9X M3 with EDC. This one lowers the front 20mm and the rear 15mm, rated for 1,060kg front and 1,190kg rear. The other lowers the front 25mm with a 1,270kg rear rating. Bulletproof Automotive can help choose. - **How much does the kit lower the E9X M3?** For the E9X M3, BILSTEIN quotes lowering of 20mm at the front and 15mm at the rear compared with the factory ride height. The springs set that height on the E9X M3, so it stays fixed once installed. The B12 Pro-Kit for E9X is rated for axle loads up to 1,060kg front and 1,190kg rear. - **Why replace the dampers when lowering the E9X M3?** The factory dampers on the E9X M3 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the E9X M3 underdamped and shorten damper life. In this kit the damper valving is matched to the Eibach spring, so the E9X M3 keeps its composure at the lower height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the E9X M3 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the E9X M3 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the E9X M3 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the E9X M3 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop [46-276223]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-15mm-rear-drop-46-276223/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop   A fixed 20mm front and 15mm rear drop for the F82 M4, on matched BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:18:24+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,599.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,599.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,158.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,158.00.</span>" sku: "46-276223" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" clearance_item: "t" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860811529" brand: "Bilstein" part_number: "46-276223" map: "2158.0" cost: "1871.36" --- # BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop [46-276223] # BILSTEIN B12 Pro-Kit for F82 BMW M4, 20mm Front and 15mm Rear Drop BILSTEIN’s B12 Pro-Kit for F82 BMW M4, in the 20mm front and 15mm rear version, pairs BILSTEIN dampers with Eibach Pro-Kit springs for the 2015 to 2020 M4. It is the simplest way to lower an F82 without coilovers: a fixed drop, matched valving, and nothing to adjust afterwards. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the F82 M4 - Valving set by BILSTEIN to control the lower spring, so the F82 M4 is not left underdamped - Fixed ride height on the F82 M4, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for F82 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 20mm - **Rear lowering:** 15mm - **Maximum axle load:** 1,050kg front, 1,250kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **BMW M4:** F82 | 2015-2020 ### Notes - **BILSTEIN lists this kit for cars with electronic suspension; ask Bulletproof Automotive how the factory damping system is handled before ordering** - **This is a fixed-height kit; ride height and damping are not adjustable** - **For a smaller rear drop, BILSTEIN makes the [B12 Pro-Kit for F82 M4 with 10mm rear drop](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-f82-bmw-m4-20mm-front-and-10mm-rear-drop-46-281784/)** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **How do the two BILSTEIN B12 Pro-Kit for F82 M4 kits differ?** BILSTEIN lists two B12 Pro-Kits for the 2015 to 2020 M4. This one lowers the car 20mm at the front and 15mm at the rear, rated for 1,050kg front and 1,250kg rear. The other lowers it 20mm at the front and 10mm at the rear. Bulletproof Automotive can help choose. - **How much does the kit lower the F82 M4?** For the F82 M4, BILSTEIN quotes lowering of 20mm at the front and 15mm at the rear compared with the factory ride height. The springs set that height on the F82 M4, so it stays fixed once installed. The B12 Pro-Kit for F82 is rated for axle loads up to 1,050kg front and 1,250kg rear. - **Why replace the dampers when lowering the F82 M4?** The factory dampers on the F82 M4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the F82 M4 underdamped and shorten damper life. In this kit the damper valving is matched to the Eibach spring, so the F82 M4 keeps its composure at the lower height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the F82 M4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the F82 M4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the F82 M4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F82 M4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop [46-276339]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-25mm-front-drop-46-276339/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop   A fixed 25mm front and 15mm rear drop for the V8 E9X M3, on matched BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:18:33+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,171.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,171.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,633.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,633.00.</span>" sku: "46-276339" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" clearance_item: "t" regular_stock: "false" units_per_sku: "1" upc: "651860812168" brand: "Bilstein" part_number: "46-276339" map: "2633.0" cost: "2275.12" --- # BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop [46-276339] # BILSTEIN B12 Pro-Kit for E9X BMW M3 with EDC, 25mm Front Drop BILSTEIN’s B12 Pro-Kit for E9X BMW M3 with EDC, in the 25mm front drop version, pairs BILSTEIN dampers with Eibach Pro-Kit springs for the V8 M3 of 2008 to 2013. It lowers the nose 25mm and the tail 15mm on fixed springs, closing up the arches of a car that sits noticeably high from the factory. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the E9X M3 - Valving set by BILSTEIN to control the lower spring, so the E9X M3 is not left underdamped - Fixed ride height on the E9X M3, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for E9X is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 25mm - **Rear lowering:** 15mm - **Maximum axle load:** 1,060kg front, 1,270kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **BMW M3:** E90 / E92 / E93 | 2008-2013 ### Notes - **BILSTEIN lists this kit for M3 models with Electronic Damper Control _(EDC)_; ask Bulletproof Automotive how the EDC system is handled before ordering** - **This is a fixed-height kit; ride height and damping are not adjustable** - **For a 20mm front drop, BILSTEIN makes the [B12 Pro-Kit for E9X M3 with 20mm front drop](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-e9x-bmw-m3-with-edc-20mm-front-drop-46-276346/)** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **How do the two BILSTEIN B12 Pro-Kit for E9X M3 kits differ?** BILSTEIN lists two B12 Pro-Kits for the 2008 to 2013 E9X M3 with EDC. This one lowers the front 25mm and the rear 15mm, rated for 1,060kg front and 1,270kg rear. The other lowers the front 20mm with a 1,190kg rear rating. Bulletproof Automotive can help choose. - **How much lower will the E9X M3 sit?** For the E9X M3, BILSTEIN quotes lowering of 25mm at the front and 15mm at the rear compared with the factory ride height. The springs set that height on the E9X M3, so it stays fixed once installed. The B12 Pro-Kit for E9X is rated for axle loads up to 1,060kg front and 1,270kg rear. - **Why replace the dampers when lowering the E9X M3?** The factory dampers on the E9X M3 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the E9X M3 underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in this E9X M3 kit, so both suit the lower ride height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the E9X M3 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the E9X M3 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the E9X M3 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the E9X M3 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM [46-258878]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-without-pasm-46-258878/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM   B12 Pro-Kit for 991 Carrera owners who want the wheel gap closed and the ride kept civil: matched BILSTEIN dampers and Eibach springs, set once and left alone." last_modified: "2026-11-13T20:21:39+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,407.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,407.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,999.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,999.00.</span>" sku: "46-258878" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860789323" brand: "Bilstein" part_number: "46-258878" map: "1999.0" cost: "1716.06" --- # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM [46-258878] # BILSTEIN B12 Pro-Kit for 991 Porsche 911 Carrera without PASM BILSTEIN’s B12 Pro-Kit for 991 Porsche 911 Carrera without PASM pairs BILSTEIN performance dampers with Eibach Pro-Kit springs to settle the 991.1 Carrera 20mm to 25mm lower at the nose and 15mm lower at the tail. It is a fixed-height kit: no threaded bodies, no adjusters, just a matched set of dampers and springs that BILSTEIN tunes together for this car. Porsche has fitted BILSTEIN dampers as original equipment for decades, and this kit keeps that factory sensibility while closing the wheel gap that makes a stock 991 look taller than it should. For a Carrera that is driven far more on the road than on a track, it is a cleaner answer than a full coilover kit, and it costs far less to own. ### Design and Performance - The kit replaces all four dampers and springs. BILSTEIN’s yellow performance dampers carry a valving tune made for the lower, stiffer Eibach springs, so the car is not left riding on factory damping that was set for a taller spring. The drop is moderate by design, which keeps bump travel and keeps the front splitter clear of most driveways and speed humps. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs - Damper valving tuned for the lower spring rate rather than the factory spring - Moderate, fixed lowering of 20-25mm front and 15mm rear - Yellow dampers and dark grey springs, all four corners in one kit - Made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Front lowering:** 20-25mm - **Rear lowering:** 15mm - **Maximum axle load:** 775kg front, 1,215kg rear - **Damper design:** Monotube and twintube - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche 911 Carrera:** 991.1 _(Carrera, Carrera S, Carrera GTS, 50th Anniversary Edition and Carrera Black Edition)_ | 2012-2016 ### Notes - **BILSTEIN lists the B12 Pro-Kit for 991 Carrera models without PASM _(Porsche Active Suspension Management)_** - **For a rear-drive 991 Carrera with PASM, BILSTEIN makes the [B12 Pro-Kit for 991 Carrera with PASM](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-with-pasm-46-258885/); for the 991 Carrera 4 without PASM, the [B12 Pro-Kit for 991 Carrera 4 without PASM](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-991-porsche-911-carrera-4-without-pasm-46-258892/)** - **This is a fixed-height kit; ride height and damping are not adjustable** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 991 Carrera work with PASM?** No. BILSTEIN lists this kit for 991.1 Carrera models built without Porsche Active Suspension Management. A Carrera with PASM needs B12 Pro-Kit 46-258885, which BILSTEIN lists for those cars from 2012 to 2019, and the Carrera 4 without PASM takes B12 Pro-Kit 46-258892. - **How much lower will a 991 Carrera sit?** BILSTEIN quotes 20mm to 25mm of lowering at the front and 15mm at the rear. The B12 Pro-Kit for 991 Carrera models sets that height with the Eibach springs, so it cannot be raised or lowered further once installed, which keeps the car close to its factory travel. - **Is the B12 Pro-Kit a coilover kit?** No. The B12 Pro-Kit is a matched set of BILSTEIN dampers and Eibach Pro-Kit lowering springs with a fixed ride height. A coilover kit such as BILSTEIN B16 adds threaded bodies for height adjustment and a damping adjuster, at a higher price and with more setting up. - **Why replace the dampers when fitting lowering springs?** Factory dampers are valved for the factory springs. Shorter, firmer lowering springs on stock dampers can leave the car underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in the kit, so both are matched to the lower ride height. - **What warranty comes with the kit?** BILSTEIN covers the B12 Pro-Kit with its Limited Lifetime Warranty, and the kit is made in Germany. Bulletproof Automotive handles any warranty claim with BILSTEIN for the owner, so there is a single point of contact if anything needs attention. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM [46-193773]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b12-pro-kit-for-997-porsche-911-carrera-4-without-pasm-46-193773/" lang: "en-US" type: "product" description: "BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM   A fixed 20mm drop for the 997 Carrera 4 and Targa 4 built without PASM, on BILSTEIN dampers and Eibach springs." last_modified: "2026-11-13T20:18:15+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,130.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,130.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,599.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,599.00.</span>" sku: "46-193773" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860784908" brand: "Bilstein" part_number: "46-193773" map: "2599.0" cost: "2246.18" --- # BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM [46-193773] # BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM BILSTEIN’s B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM fits the all-wheel-drive 997 on conventional dampers: the Carrera 4 from 2006 to 2012, the Targa 4 from 2007 to 2012, and the 2008 Carrera 4S and Targa 4S. BILSTEIN dampers and Eibach Pro-Kit springs lower the car 20mm at each end. ### Design and Performance - Because the kit replaces conventional dampers, there is no electronic system to consider; the springs fix the height and BILSTEIN sets the valving to match. ### Features - BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 997 Carrera 4 - Valving set by BILSTEIN to control the lower spring, so the 997 Carrera 4 is not left underdamped - Fixed ride height on the 997 Carrera 4, with no threaded bodies or adjusters to set or maintain - The B12 Pro-Kit for 997 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty ### Specifications - **Damper design:** Monotube - **Front lowering:** 20mm - **Rear lowering:** 20mm - **Maximum axle load:** 825kg front, 1,250kg rear - **Finish:** Yellow dampers, dark grey springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited Lifetime Warranty ### Applications - **Porsche 911:** 997 _(including Carrera 4, Targa 4, Carrera 4S and Targa 4S)_ | 2006-2012 ### Notes - **BILSTEIN lists this kit for cars without PASM _(Porsche Active Suspension Management)_** - **For PASM cars and the Turbo, BILSTEIN makes the [B12 Pro-Kit for 997 Carrera 4 and Turbo with PASM](https://bulletproofautomotive.com/product/bilstein-b12-pro-kit-for-997-porsche-911-carrera-4-and-turbo-with-pasm-46-193797/)** - **This is a fixed-height kit; ride height and damping are not adjustable** - **The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle** - **A wheel alignment is needed after installation** ### Frequently Asked Questions - **Does the BILSTEIN B12 Pro-Kit for 997 Carrera 4 fit cars with PASM?** No. BILSTEIN lists this kit for the all-wheel-drive 997 without PASM, Porsche Active Suspension Management. For PASM cars, including the Turbo, BILSTEIN makes a separate B12 Pro-Kit, which Bulletproof Automotive also stocks. Check the options list or ask for a VIN check before ordering. - **How much lower will the 997 Carrera 4 sit?** For the 997 Carrera 4, BILSTEIN quotes lowering of 20mm front and rear compared with the factory ride height. The springs set that height on the 997 Carrera 4, so it stays fixed once installed. The B12 Pro-Kit for 997 is rated for axle loads up to 825kg front and 1,250kg rear. - **Why replace the dampers when lowering the 997 Carrera 4?** The factory dampers on the 997 Carrera 4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 997 Carrera 4 underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in this 997 Carrera 4 kit, so both suit the lower ride height. - **Does the kit need a wheel alignment?** Yes. Lowering changes camber and toe, so the 997 Carrera 4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 997 Carrera 4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 997 Carrera 4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera 4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series [49-303391]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-evo-se-plug-and-play-coilovers-for-g20-bmw-3-series-g22-4-49-303391/" lang: "en-US" type: "product" description: "BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series   Plug-and-play BILSTEIN EVO SE dampers that lower the rear-drive G20 and G22 and keep the factory drive modes." last_modified: "2026-11-13T20:20:33+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,824.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,824.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,399.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,399.00.</span>" sku: "49-303391" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860861845" brand: "Bilstein" part_number: "49-303391" map: "3399.0" cost: "2782.75" --- # BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series [49-303391] # BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series BILSTEIN’s EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series fit the rear-drive 330i, 330e, M340i and 430i built with adaptive dampers. The EVO SE dampers connect at the factory plugs and answer to the original control unit, so the drive modes stay, and threaded bodies bring the car 25mm to 45mm closer to the road at the front. ### Design and Performance - Progressive springs at 405 lbs/in front and 756 lbs/in rear, finished in blue on this kit, sit on grey twintube EVO SE dampers. ### Features - Electronic damping control through the factory system of the G20 3 Series, connected at the original plugs - Height-adjustable twintube dampers with threaded bodies for setting the stance of the G20 3 Series - Progressive springs finished in blue, with rates matched to the front and rear axle loads of the G20 3 Series - BILSTEIN Limited 5-Year Warranty, with the EVO SE Plug and Play Coilovers made in Germany ### Specifications - **Damping adjustment:** Electronic, through the factory adaptive system - **Damper design:** Twintube - **Front spring rate:** 405 lbs/in, progressive - **Rear spring rate:** 755.96 lbs/in, progressive - **Front lowering:** 25-45mm or 25-40mm, by model - **Rear lowering:** 20-45mm - **Maximum axle load:** Up to 1,075kg front, 1,325kg rear, by model - **Finish:** Grey dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 3 Series:** G20 _(330e 2021-2022, 330i 2019-2021, M340i 2020-2025)_ | 2019-2025 - **BMW 4 Series:** G22 _(430i 2021-2025)_ | 2021-2025 ### Notes - **BILSTEIN lists the kit for cars with electronic suspension _(adaptive dampers)_** - **For xDrive cars with adaptive dampers, BILSTEIN makes the [EVO SE Plug and Play Coilovers for G20 xDrive](https://bulletproofautomotive.com/product/bilstein-evo-se-plug-and-play-coilovers-for-g20-bmw-3-g22-4-xdrive-49-305135/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN EVO SE Plug and Play Coilovers for G20 fit the M340i?** Yes. BILSTEIN lists the rear-drive M340i from 2020 to 2025 with adaptive dampers, along with the 330i from 2019, the 330e from 2021 and the 430i from 2021. xDrive cars take a separate EVO SE kit, which Bulletproof Automotive also stocks. - **What ride height range does the kit give the rear-drive G20 and G22?** BILSTEIN quotes lowering of 25mm to 45mm at the front and 20mm to 45mm at the rear on the 330e and 330i, and 25mm to 40mm at the front and 20mm to 45mm at the rear on the 430i and M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO SE Plug and Play Coilovers are rated for axle loads up to 1,075kg front and 1,325kg rear. - **Is any coding needed after installation?** BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control of the rear-drive G20 and G22. The dampers connect at the factory plugs and the G20 3 Series keeps running its own electronic damping, so the job is mechanical, followed by a wheel alignment. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the EVO SE kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper [48-244428]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f56-mini-cooper-48-244428/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper   A sharper, lower F56 MINI: ten clicks of BILSTEIN damping and a 25mm to 40mm drop at the nose." last_modified: "2026-11-13T20:14:21+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,351.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,351.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,319.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,319.00.</span>" sku: "48-244428" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860759906" brand: "Bilstein" part_number: "48-244428" map: "2319.0" cost: "2008.3" --- # BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper [48-244428] # BILSTEIN B16 PSS10 Coilovers for F56 MINI Cooper BILSTEIN’s B16 PSS10 Coilovers for F56 MINI Cooper fit the third-generation hatch from 2014 to 2024: the Cooper, the Cooper S and the John Cooper Works from 2016. The F56 is larger and more refined than earlier MINIs, and this kit restores some of their edge with a 25mm to 40mm front drop and ten damping settings per corner, on cars without adaptive dampers. ### Design and Performance - A 399 lbs/in progressive front spring and a 314 lbs/in progressive rear sit on zinc-plated front and yellow rear dampers. BILSTEIN notes that wheel spacers may be needed with some wheel and tire combinations. ### Features - 10 damping settings per corner of the F56 MINI, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the F56 MINI ride height is set on the car and the bodies resist road salt - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the F56 MINI - The B16 PSS10 Coilovers for F56 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 399 lbs/in, progressive - **Rear spring rate:** 314 lbs/in, progressive - **Front lowering:** 25-40mm - **Rear lowering:** 10-30mm - **Maximum axle load:** 945kg front, 855kg rear - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **MINI Cooper:** F56 _(including S and John Cooper Works)_ | 2014-2024 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension** - **BILSTEIN notes that wheel spacers may be required for some wheel and tire combinations** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for F56 fit cars with adaptive suspension?** No. BILSTEIN lists the kit for the 2014 to 2024 Cooper, Cooper S and John Cooper Works without electronic suspension. A MINI with Dynamic Damper Control has electronically adjusted dampers, and this kit is not designed to connect to that system. - **What ride height range does the kit give the F56 MINI Cooper?** For the F56 MINI Cooper, BILSTEIN quotes lowering of 25mm to 40mm at the front and 10mm to 30mm at the rear compared with the factory ride height. On the F56 MINI, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for F56 are rated for axle loads up to 945kg front and 855kg rear. - **What does the 10-stage adjuster change on the F56 MINI Cooper?** On the F56 MINI Cooper, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the F56 MINI, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the F56 MINI Cooper needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the F56 MINI before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the F56 MINI Cooper goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F56 MINI is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4 [49-246988]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-f8x-bmw-m3-m4-49-246988/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4   Keep Comfort, Sport and Sport Plus on the F80 M3 and F82 M4 while lowering the front by 30mm to 40mm." last_modified: "2026-11-13T20:17:15+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,576.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,576.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,859.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,859.00.</span>" sku: "49-246988" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860761022" brand: "Bilstein" part_number: "49-246988" map: "3859.0" cost: "3318.33" --- # BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4 [49-246988] # BILSTEIN B16 DampTronic Coilovers for F8X BMW M3 / M4 BILSTEIN’s B16 DampTronic Coilovers for F8X BMW M3 / M4 fit the F80 M3 from 2015 to 2018 and the F82 M4 from 2015 to 2020, the M4 CS included, on cars with Adaptive M Suspension. The factory damping control keeps running the BILSTEIN dampers, so Comfort, Sport and Sport Plus all remain, while threaded bodies drop the front 30mm to 40mm. ### Design and Performance - The springs, 514.26 lbs/in front and 799.96 lbs/in rear and both progressive, match the B16 PSS10 kit for these cars; only the damper control differs. ### Features - Electronic dampers that plug into the F80 M3 and F82 M4 damping control and keep every factory mode - Monotube construction with a zinc-coated threaded body that sets the F80 M3 and F82 M4 ride height and guards against corrosion - Progressive springs finished in blue, with rates matched to the front and rear axle loads of the F80 M3 and F82 M4 - BILSTEIN Limited 5-Year Warranty, with the B16 DampTronic Coilovers for F8X made in Germany ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 514.26 lbs/in, progressive - **Rear spring rate:** 799.96 lbs/in, progressive - **Front lowering:** 30-40mm - **Rear lowering:** 5-25mm - **Maximum axle load:** 990kg front, 1,250kg rear - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW M3:** F80 | 2015-2018 - **BMW M4:** F82 _(including CS)_ | 2015-2020 ### Notes - **BILSTEIN lists the kit for cars with electronic suspension _(Adaptive M Suspension)_** - **For cars without it, BILSTEIN makes the [B16 PSS10 Coilovers for F8X M2, M3 and M4](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-f8x-bmw-m2-m3-m4-48-244091/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for F8X fit the M2?** No. BILSTEIN lists this kit for the F80 M3 and F82 M4 with Adaptive M Suspension. The F87 M2 was not offered with adaptive dampers, so it and any M3 or M4 without them take the manual-adjust B16 PSS10 kit for the F8X instead. - **How much does the kit lower the F80 M3 and F82 M4?** For the F80 M3 and F82 M4, BILSTEIN quotes lowering of 30mm to 40mm at the front and 5mm to 25mm at the rear compared with the factory ride height. On the F80 M3 and F82 M4, the threaded bodies set the exact height inside that range. The B16 DampTronic Coilovers for F8X are rated for axle loads up to 990kg front and 1,250kg rear. - **How is B16 DampTronic different from B16 PSS10?** The PSS10 kit is adjusted by hand, ten clicks per damper, for a F80 M3 and F82 M4 that left the factory on passive dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the F80 M3 and F82 M4; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the F80 M3 and F82 M4 keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the F80 M3 and F82 M4 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the F80 M3 and F82 M4 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the F80 M3 and F82 M4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F80 M3 and F82 M4 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle [48-230032]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-tdi-50mm-solid-rear-axle-48-230032/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle   The B16 kit for the 2015 Golf TDI and SportWagen TDI with the torsion-beam rear: 30mm to 50mm lower, ten damping settings." last_modified: "2026-11-13T21:47:54+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,600.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,600.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,799.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,799.00.</span>" sku: "48-230032" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860747767" brand: "Bilstein" part_number: "48-230032" map: "1799.0" cost: "1566.18" --- # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle [48-230032] # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle BILSTEIN’s B16 PSS10 Coilovers for Mk7 Volkswagen Golf TDI, 50mm Strut and Solid Rear Axle, fit the 2015 Golf TDI and Golf SportWagen TDI in S, SE and SEL trim, built with a 50mm outside strut diameter and the torsion-beam rear axle. It is a narrow application, and BILSTEIN tunes the kit for it with a linear front spring and a 10-click adjuster per corner. ### Design and Performance - A 371 lbs/in linear front spring suits the weight of the diesel engine, with a 423 lbs/in progressive rear spring working with the solid rear axle. ### Features - A 10-position adjuster on each Mk7 Golf TDI damper, firming or softening rebound and compression in one step - Monotube construction with a zinc-coated threaded body that sets the Mk7 Golf TDI ride height and guards against corrosion - Linear front and progressive rear springs finished in blue, with rates matched to the front and rear axle loads of the Mk7 Golf TDI - BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for Mk7 made in Germany ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 371 lbs/in, linear - **Rear spring rate:** 423 lbs/in, progressive - **Front lowering:** 30-50mm - **Rear lowering:** 30-50mm - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Volkswagen Golf:** Mk7 _(including TDI S, TDI SE and TDI SEL)_ | 2015 - **Volkswagen Golf SportWagen:** Mk7 _(including TDI S, TDI SE and TDI SEL)_ | 2015 ### Notes - **For 2015 TDI cars with a 50mm strut and solid rear axle; see the [50mm strut and independent rear kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-50mm-strut-independent-rear-48-254960/) and the [55mm strut kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-volkswagen-golf-55mm-strut-48-230049/) for other Mk7 Golf versions** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit?** BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 50mm outside strut diameter and the solid rear axle, which BILSTEIN lists for the 2015 TDI models. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping. - **How much does the kit lower the Mk7 Golf TDI?** For the Mk7 Golf TDI, BILSTEIN quotes lowering of 30mm to 50mm front and rear compared with the factory ride height. The B16 PSS10 Coilovers for Mk7 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Mk7 Golf TDI can run in practice. - **Is the B16 kit too firm for daily driving on the Mk7 Golf TDI?** Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the Mk7 Golf TDI, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most Mk7 Golf TDI owners settle on a road setting and change it only for events. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the Mk7 Golf TDI needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf TDI before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf TDI goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf TDI is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut [48-230049]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-mk7-volkswagen-golf-55mm-strut-48-230049/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut   The 55mm strut version of the BILSTEIN B16 kit for the 2015 to 2016 Mk7 Golf and Golf SportWagen." last_modified: "2026-11-13T21:48:08+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,600.00</bdi></span></del> <span class="screen-reader-text">Original price was: $2,600.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>1,799.00</bdi></span></ins><span class="screen-reader-text">Current price is: $1,799.00.</span>" sku: "48-230049" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "false" units_per_sku: "1" upc: "651860752952" brand: "Bilstein" part_number: "48-230049" map: "1799.0" cost: "1566.18" --- # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut [48-230049] # BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut BILSTEIN’s B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut, are for 2015 and 2016 Golf and Golf SportWagen models built with a 55mm outside strut diameter. The kit fits BILSTEIN monotube dampers on threaded bodies with progressive springs and a 10-click adjuster per corner. ### Design and Performance - Progressive springs at 320 lbs/in front and 423 lbs/in rear sit on zinc-plated front and yellow rear dampers. ### Features - 10-stage damping adjustment on every corner of the Mk7 Golf, changing rebound and compression with each click - Threaded, zinc-coated damper bodies for setting ride height at each corner of the Mk7 Golf - Springs and dampers tuned as a pair for the Mk7 Golf, with progressive spring rates and a blue finish - Built in Germany, the B16 PSS10 Coilovers for Mk7 are backed by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 320 lbs/in, progressive - **Rear spring rate:** 423 lbs/in, progressive - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **Volkswagen Golf:** Mk7 _(including Launch Edition, S, SE, SEL, TDI S, TDI SE and TDI SEL)_ | 2015-2016 - **Volkswagen Golf SportWagen:** Mk7 _(including S, SE, SEL, TDI S and TDI SE)_ | 2015-2016 ### Notes - **BILSTEIN USA does not publish an application list for this part number; fitment shown is from the BILSTEIN distributor listing** - **For other Mk7 Golf versions, see the [50mm strut and independent rear kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-50mm-strut-independent-rear-48-254960/) and the [50mm strut and solid rear axle kit](https://bulletproofautomotive.com/product/bilstein-b16-pss10-coilovers-for-mk7-golf-tdi-50mm-solid-rear-axle-48-230032/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit?** BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 55mm outside strut diameter. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping. - **What is the difference between BILSTEIN B14 and B16 kits?** For the Mk7 Golf, both would be height-adjustable BILSTEIN coilover kits with threaded bodies and matched springs. B14 dampers have fixed valving chosen by BILSTEIN, while the B16 adds a 10-stage adjuster, so an owner of the Mk7 Golf can firm the damping up for a track day and soften it for the drive home without changing parts. - **How low do the BILSTEIN B16 PSS10 Coilovers for Mk7 with 55mm strut go?** BILSTEIN does not publish a lowering range or an application table for this part number. The B16 PSS10 Coilovers for Mk7 cars set height on threaded bodies, and Bulletproof Automotive can confirm fitment and the expected range with BILSTEIN for a specific car. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC [49-234923]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-damptronic-coilovers-for-e60-bmw-m5-with-edc-49-234923/" lang: "en-US" type: "product" description: "BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC   A lower, firmer V10 E60 M5 with its Electronic Damper Control still in charge of the dampers." last_modified: "2026-11-13T20:17:10+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>5,345.00</bdi></span></del> <span class="screen-reader-text">Original price was: $5,345.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,699.00</bdi></span></ins><span class="screen-reader-text">Current price is: $3,699.00.</span>" sku: "49-234923" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860737447" brand: "Bilstein" part_number: "49-234923" map: "3699.0" cost: "3181.67" --- # BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC [49-234923] # BILSTEIN B16 DampTronic Coilovers for E60 BMW M5 with EDC BILSTEIN’s B16 DampTronic Coilovers for E60 BMW M5 with EDC fit the V10 M5 of 2006 to 2010, keeping its Electronic Damper Control in place while adding threaded height adjustment and BILSTEIN springs. The E60 M5 is heavy and enormously fast, and a lower, better-controlled body makes the most of its 500-horsepower V10. ### Design and Performance - A 526 lbs/in progressive front spring carries the V10 over the nose, with a 291 lbs/in progressive rear, rated for 1,090kg front and 1,270kg rear. ### Features - Works with the factory electronic suspension of the E60 M5, retaining its controls and active functions - Monotube dampers in zinc-coated threaded bodies, so the E60 M5 ride height is set on the car and the bodies resist road salt - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the E60 M5 - The B16 DampTronic Coilovers for E60 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** Electronic, through the factory damping control - **Damper design:** Monotube - **Front spring rate:** 526 lbs/in, progressive - **Rear spring rate:** 291 lbs/in, progressive - **Front lowering:** 15-35mm - **Rear lowering:** 15-35mm - **Maximum axle load:** 1,090kg front, 1,270kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW M5:** E60 | 2006-2010 ### Notes - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 DampTronic Coilovers for E60 keep the EDC settings?** Yes. BILSTEIN builds the kit for E60 M5 cars with Electronic Damper Control and states that the active features and factory controls are retained. The driver keeps choosing between the EDC settings from the M Drive menu and console buttons as before. - **How much lower will the E60 M5 sit?** For the E60 M5, BILSTEIN quotes lowering of 15mm to 35mm front and rear compared with the factory ride height. On the E60 M5, the threaded bodies set the exact height inside that range. The B16 DampTronic Coilovers for E60 are rated for axle loads up to 1,090kg front and 1,270kg rear. - **How is B16 DampTronic different from B16 PSS10?** B16 PSS10 has a 10-click knob on each damper and is meant for a E60 M5 without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the E60 M5; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the E60 M5 keeps managing the dampers. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the E60 M5 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the E60 M5 before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the E60 M5 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the E60 M5 is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4 [48-244091]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f8x-bmw-m2-m3-m4-48-244091/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4   B16 PSS10 Coilovers for F8X M2, M3 and M4 owners who want the stance lower, the springs firmer and the damping set by hand with one 10-click" last_modified: "2026-11-13T20:21:28+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,755.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,755.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,599.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,599.00.</span>" sku: "48-244091" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860755250" brand: "Bilstein" part_number: "48-244091" map: "2599.0" cost: "2246.3" --- # BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4 [48-244091] # BILSTEIN B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4 BILSTEIN’s B16 PSS10 Coilovers for F8X BMW M2 / M3 / M4 lower the F87, F80 and F82 by 30mm to 40mm at the front and give the driver a 10-click damping adjuster at every corner, on cars that left the factory without Adaptive M Suspension. BILSTEIN pairs its monotube performance dampers with progressive springs rated for each axle of the F8X. ### Design and Performance - The front axle runs threaded, zinc-coated coilover struts, while the rear keeps the separate spring and damper layout the F8X uses from the factory. The 10-stage adjuster lets the same car run softer for a wet commute and firmer for a dry track day, and BILSTEIN develops the tune on the Nürburgring. ### Features - 10-stage damping adjustment that changes rebound and compression with each click - Monotube performance dampers with zinc-coated threaded bodies for height adjustment and corrosion protection - Progressive springs, finished in BILSTEIN blue, with rates matched to the front and rear axle loads of the F8X - Front coilover struts and separate rear springs and dampers, following the factory rear layout - B16 PSS10 Coilovers for F8X cars bolt to the factory mounting points, with no cutting or welding - Made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 514.26 lbs/in, progressive - **Rear spring rate:** 799.96 lbs/in, progressive - **Front lowering:** 30-40mm - **Rear lowering:** 5-25mm - **Maximum axle load:** 990kg front, 1,250kg rear - **Finish:** Zinc dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW M2:** F87 _(including Competition and CS)_ | 2016-2021 - **BMW M3:** F80 | 2015-2018 - **BMW M4:** F82 _(including CS)_ | 2015-2020 ### Notes - **BILSTEIN lists the B16 PSS10 Coilovers for F8X cars without Adaptive M Suspension _(electronic dampers)_** - **For F80 M3 and F82 M4 models with Adaptive M Suspension, BILSTEIN makes the [B16 DampTronic Coilovers for F8X M3 and M4](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-f8x-bmw-m3-m4-49-246988/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for F8X work with Adaptive M Suspension?** No. BILSTEIN lists this kit for M2, M3 and M4 models built without electronic dampers. For an F80 M3 or F82 M4 with Adaptive M Suspension, BILSTEIN makes the B16 DampTronic kit, which keeps the factory damper control working. Check the build sheet or the suspension button on the center console before ordering. - **How much lower will an M3 or M4 sit on these coilovers?** BILSTEIN quotes a lowering range of 30mm to 40mm at the front and 5mm to 25mm at the rear compared with the factory ride height. The threaded bodies let you pick a height anywhere inside that range, and the B16 PSS10 Coilovers for F8X cars are rated for axle loads up to 990kg front and 1,250kg rear. - **What does the 10-stage adjuster change?** Each of the 10 clicks changes both rebound and compression damping at the same time, so the damper gets firmer or softer as a whole. BILSTEIN sets the range for each application, which means the softest setting stays usable on the street and the firmest setting suits a smooth circuit. - **What is the difference between BILSTEIN B14 and B16 kits?** Both are height-adjustable BILSTEIN coilover kits with threaded bodies and matched springs. A B14 kit has fixed damping that BILSTEIN sets for the car. A B16 kit adds the 10-stage adjuster, so the owner can tune the damping for road, wet or track use without changing any parts. - **What warranty comes with the kit?** BILSTEIN covers the B16 PSS10 kit with its Limited 5-Year Warranty. The dampers are built in Germany, and Bulletproof Automotive handles any warranty claim with BILSTEIN on behalf of the owner, so there is one point of contact from order to support. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. --- --- title: "BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive [48-207287]" url: "https://bulletproof2026.magepitstop.com/product/bilstein-b16-pss10-coilovers-for-f30-bmw-3-series-f32-f22-xdrive-48-207287/" lang: "en-US" type: "product" description: "BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive   Ten clicks of BILSTEIN damping and a 30mm to 50mm drop for the all-wheel-drive F30, F34 GT, F32, F36 and F22." last_modified: "2026-11-13T20:14:51+00:00" price: "<del aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>3,467.00</bdi></span></del> <span class="screen-reader-text">Original price was: $3,467.00.</span><ins aria-hidden="true"><span class="woocommerce-Price-amount amount"><bdi><span class="woocommerce-Price-currencySymbol" translate="no" dir="auto">$</span>2,399.00</bdi></span></ins><span class="screen-reader-text">Current price is: $2,399.00.</span>" sku: "48-207287" in_stock: true attributes: air_freight_prohibited: "false" not_carb_approved: "false" ltl_freight_required: "false" prop_65: "Y" part_type: "automotive" epa: "N/A" carb_acknowledgement_required: "false" regular_stock: "t" units_per_sku: "1" upc: "651860742090" brand: "Bilstein" part_number: "48-207287" map: "2399.0" cost: "2076.41" --- # BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive [48-207287] # BILSTEIN B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive BILSTEIN’s B16 PSS10 Coilovers for F30 BMW 3 Series, F32 4 Series and F22 2 Series xDrive fit the all-wheel-drive cars of that generation, from the 228i and 320i xDrive to the 340i and 440i xDrive and the 3 Series Gran Turismo, on cars without adaptive dampers. All-wheel-drive cars use different front struts, which is why BILSTEIN builds this kit separately from the rear-drive version. ### Features - 10 damping settings per corner of the F30 xDrive, with rebound and compression moving together on each click - Monotube dampers in zinc-coated threaded bodies, so the F30 xDrive ride height is set on the car and the bodies resist road salt - Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the F30 xDrive - The B16 PSS10 Coilovers for F30 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty ### Specifications - **Damping adjustment:** 10 stages, rebound and compression together - **Damper design:** Monotube - **Front spring rate:** 399 lbs/in, progressive - **Rear spring rate:** 565 lbs/in, progressive - **Front lowering:** 30-50mm - **Rear lowering:** 30-50mm - **Maximum axle load:** 1,020kg front, 1,120kg rear - **Finish:** Zinc front, yellow rear dampers, blue springs - **Country of origin:** Germany - **Warranty:** BILSTEIN Limited 5-Year Warranty ### Applications - **BMW 2 Series:** F22 _(including 228i xDrive and 230i xDrive)_ | 2015-2017 and 2019-2021 - **BMW 3 Series:** F30 / F34 _(including 320i xDrive, 328d xDrive, 328i GT xDrive, 328i xDrive, 330i GT xDrive, 330i xDrive, 335i GT xDrive, 335i xDrive, 340i GT xDrive and 340i xDrive)_ | 2013-2019 - **BMW 4 Series:** F32 / F36 _(including 428i xDrive, 428i xDrive Gran Coupe, 430i xDrive, 430i xDrive Gran Coupe, 435i xDrive, 435i xDrive Gran Coupe, 440i xDrive and 440i xDrive Gran Coupe)_ | 2014-2020 ### Notes - **BILSTEIN lists the kit for cars without electronic suspension; for cars with it, BILSTEIN makes the [B16 DampTronic Coilovers for F30 xDrive](https://bulletproofautomotive.com/product/bilstein-b16-damptronic-coilovers-for-f30-bmw-3-series-f32-f22-xdrive-49-255980/)** - **BILSTEIN specifies its [coilover spanner wrench](https://bulletproofautomotive.com/product/bilstein-b1-coilover-spanner-wrench-hook-plug-e4-xs1-z001a00/) for setting the spring seats and lock rings on this kit** - **A wheel alignment is needed after installation and after any ride height change** ### Frequently Asked Questions - **Do the BILSTEIN B16 PSS10 Coilovers for F30 xDrive fit the 3 Series Gran Turismo?** Yes. BILSTEIN lists the 328i, 335i, 330i and 340i GT xDrive alongside the xDrive sedans, coupes and Gran Coupes. The kit is for cars without electronic suspension; for xDrive cars with adaptive dampers, BILSTEIN makes a B16 DampTronic kit. Bulletproof Automotive can check the options list from the VIN. - **What ride height range does the kit give the F30 xDrive?** For the F30 xDrive, BILSTEIN quotes lowering of 30mm to 50mm front and rear compared with the factory ride height. On the F30 xDrive, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for F30 are rated for axle loads up to 1,020kg front and 1,120kg rear. - **What does the 10-stage adjuster change on the F30 xDrive?** On the F30 xDrive, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the F30 xDrive, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for. - **Does the kit need a wheel alignment afterwards?** Yes. Any change to ride height alters camber and toe, so the F30 xDrive needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the F30 xDrive before the alignment, so it is only paid for once. - **Who supports the kit after purchase?** Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the F30 xDrive goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the F30 xDrive is made in Germany to the standard BILSTEIN applies to its original-equipment work. # About BILSTEIN BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005. ---